Achtung:

Sie haben Javascript deaktiviert!
Sie haben versucht eine Funktion zu nutzen, die nur mit Javascript möglich ist. Um sämtliche Funktionalitäten unserer Internetseite zu nutzen, aktivieren Sie bitte Javascript in Ihrem Browser.

Experiments with the bonding machine Show image information
Quality evaluation of bonded interconnects using a shear tester. Show image information
Reliability analysis of a friction clutch. Show image information
Lab work in teaching. Show image information
Transport of fine powder using ultrasonic vibrations Show image information

Experiments with the bonding machine

Quality evaluation of bonded interconnects using a shear tester.

Reliability analysis of a friction clutch.

Lab work in teaching.

Transport of fine powder using ultrasonic vibrations

Dynamics and Mechatronics (LDM)

Members of the Chair of Dynamics and Mechatronics

Prof. Dr.-Ing. habil. Walter Sextro

Contact
Biography
Publications
Prof. Dr.-Ing. habil. Walter Sextro

Dynamics and Mechatronics (LDM)

Head - Professor - professor

Phone:
+49 5251 60-1801
Phone:
(+49) 01520 8958961
Fax:
+49 5251 60-1803
Office:
P1.3.31.1
Office hours:

By arrangement

Web:
Visitor:
Pohlweg 47-49
33098 Paderborn

03/2009 - today

Head of Chair of Mechatronics and Dynamics

Full Professor (W3) and Head of Chair of Mechatronics and Dynamics, University Paderborn

06/2014 - 06/2014

Academic Winner of PHM Challenge

2014 IEEE International Conference of Prognostics and Health Management, Reliability Society, together with T. Meyer and J. K. Kimotho

2010

Scientific award of the Paderborn University 2010

on the topic "Simulation and optimization of innovative lightweight construction materials", together with Prof. A. Walther

01.11.2009

Best Paper Award

International Academy, Research, and Industry Association (IARIA), "Towards the Integration of Condition Monitoring in Self-Optimizing Function Modules", ADAPTIVE 2009, Griechenland, together with Dr. Ch. Sondermann-Wölke

02/2004 - 02/2009

Institute Leader

Full Professor for Mechanics and Head of the Institute of Mechanics, University of Technology, Graz (Austria)

07/2001 - 12/2003

Team-Leader of the group "Dynamics"

Team-Leader of the group "Dynamics" with 8 scientific assistants at the Institute of Mechanics, University of Hannover

10/2001 - 10/2001

Habilitation

Habilitation in Mechanics, University of Hannover

09/1999 - 06/2001

Project-Leader

Project-Leader: "Dynamical Contact Problems with Friction - Models, Methods, Applications", sponsored by the "Deutsche Forschungsgemeinschaft (DFG)"

10/1993 - 07/1999

Research Assistant

Research Assistant at the Institute of Mechanics, University of Hannover

11/1998 - 11/1998

Scientific award Hannover 1998

Scientific award of the “Freundeskreis der Universität Hannover e.V.” for outstanding scientific performance with regard to the Dissertation

06/1997 - 06/1997

promotion

PhD in Mechanics, Advisor: Prof. Dr.-Ing. K. Popp

09/1990 - 09/1993

Mechanical Engineer / Project-Coordinator

Mechanical Engineer / Project-Coordinator, Baker Hughes INTEQ, Drilling Research Center, Celle, Germany and Houston, Texas

08/1988 - 04/1990

Student of Mechanical Engineering

Student of Mechanical Engineering, University of Hannover

10/1987 - 07/1988

Advanced Applied Mechanics Post Graduate Course

Student of Advanced Applied Mechanics Post Graduate Course, Imperial College of Science and Technology, London, UK

10/1982 - 08/1987

Student of Mechanical Engineering

Student of Mechanical Engineering, University of Hannover


Open list in Research Information System

2019

Intelligente Herstellung zuverlässiger Kupferbondverbindungen

W. Sextro, M. Brökelmann, Springer Verlag, 2019, pp. 67

Dieses Buch beschreibt basierend auf dem gleichnamigen Innovationsprojekt im Spitzencluster it’s OWL die Entwicklung intelligenter Verfahren und Systeme, um auch unter variablen Produktionsbedingungen eine zuverlässige Massenfertigung von Kupferbondverbindungen sicherzustellen.Dabei wird der gesamte Prozess der Ultraschall-Verbindungsbildung modelliert. Dies beinhaltet u. a. ein Reibmodell mit gekoppeltem Anbindungsmodell, den Ultraschall-Erweichungseffekt und den Verschleiß des Bondwerkzeugs. Zudem wird das Konzept einer selbstoptimierenden Bondmaschine vorgestellt, welche Prozessparameter in Abhängigkeit von Störgrößen wie Verschleiß anpasst.Das Ultraschallbonden mit Aluminiumdraht ist ein etabliertes Fertigungsverfahren zur Kontaktierung von Leistungshalbleitern. Zukünftige Leistungshalbleiterchips erfordern jedoch einen Technologiewechsel zu Kupferdraht. Die Prozessparameter unterscheiden sich dabei deutlich von den bekannten Aluminiumprozessen, ihre Wechselwirkungen sind weitestgehend unbekannt.


Konstruktion und Zustandsüberwachung eines Gummi-Metall-Teils mit integriertem Thermoelement

A. Bender, K. Reinke, W. Sextro, in: 10. VDI-Fachtagung Schwingungen von Windenergieanlagen 2019, 2019, pp. 241-248

Gummi-Metall-Teile (GM-Teile) werden zur Schwingungsreduktion u. a. in Windenergieanlagen eingesetzt. Mögliche Anwendungen der Teile liegen in Wellen-, Generator- und Getriebelagerungen, Lagern für die Gondel und ihre Komponenten sowie in Drehmomentstützen. Mit dem Ziel eine prädiktive Instandhaltung zu realisieren, soll eine Zustandsüberwachung für die GM-Teile entwickelt werden. Diese Entwicklung basiert auf der Umsetzung diverser Schritte. Neben der funktionalen Betrachtung wird zwingend auch die konstruktive Integration der Sensoren in das überwachte Teil berücksichtigt. Der Schwerpunkt dieser Arbeit liegt auf der verwendeten Messgröße Temperatur, die mittels ausgewählter Sensorik detektiert wird. Dabei werden Lebensdauerversuche unter instationären Betriebsbedingungen durchgeführt, um diese Messdaten zu generieren. In der Datenauswertung werden sie hinsichtlich der Degradierung des GM-Teils analysiert und für die Ermittlung der nutzbaren Restlebensdauer verwendet. Rubber-metal-elements are used for isolation of vibrations e. g. in wind turbines. Possible applications of the elements are shaft bearings, generator bearings, gearbox bearings, bearings for the nacelle and its components and torque supports. In order to realize predictive maintenance, an accurate condition monitoring system for rubber-metal-elements should be developed. During that development different aspects have to be implemented. Additionally to the functional analysis, the constructive integration of the sensors into the monitored part is mandatory. The focus of this work is on the measured variable temperature, which is detected by means of appropriate sensors. Thereby lifetime tests are run under non-stationary operating conditions to generate temperature measurements. During data analysis, the measured data is analyzed regarding the degradation of the rubber-metal-elements and remaining useful lifetimes are estimated.


Integration von Verlässlichkeitsmodellen der Entwicklung in einen Digitalen Zwilling zur Umsetzung einer vorausschauenden Instandhaltung

T. Kaul, J. Hentze, W. Sextro, I. Gräßler, in: Fachtagung Mechatronik 2019 Paderborn, 2019

In der Entwicklung mechatronischer Systeme spielt die Steigerung der Verlässlichkeit und somit auch der Zuverlässigkeit und der funktionalen Sicherheit eine entscheidende Rolle. Die modellbasierte Entwicklung liefert in Kombination mit unterstützender Software einen wichtigen Beitrag zur Absicherung der Verlässlichkeit mechatronischer Systeme in frühen Entwicklungsphasen. In der Nutzungsphase ermöglichen aktuelle Verfahren der Zustandsüberwachung und moderne Methoden der Regelungstechnik eine effektive Absicherung. Modelle aus der Entwicklung mechatronischer Systeme enthalten weitreichende Informationen über die Architektur, das Verhalten und die Verlässlichkeit eines Systems. Diese Modelle können als Grundlage für die Erstellung eines Digitalen Zwillings für die vorausschauende Instandhaltung verwendet und mit Zustandsdaten des realen Systems kombiniert werden. Die Nutzung der Modelle für den Digitalen Zwilling bietet weitreichende Potenziale und vereinfacht dessen Erzeugung. Die Veröffentlichung beschreibt Rahmenbedingungen der Integration und stellt die Potenziale des Digitalen Zwillings zur vorausschauenden Instandhaltung dar.


Using complex multi-dimensional vibration trajectories in ultrasonic bonding and welding

R. Schemmel, T. Hemsel, C. Dymel, M. Hunstig, M. Brökelmann, W. Sextro, Sensors and Actuators A: Physical (2019), 295, pp. 653 - 662

Ultrasonic joining is a common industrial process. In the electronics industry it is used to form electrical connections, including those of dissimilar materials. Multiple influencing factors in ultrasonic joining are known and extensively investigated; process parameters like ultrasonic power, bond force, and bonding frequency of the ultrasonic vibration are known to have a high impact on a reliable joining process and need to be adapted for each new application with different geometry or materials. This contribution is focused on increasing ultrasonic power transmitted to the interface and keeping mechanical stresses during ultrasonic bonding low by using a multi-dimensional ultrasonic transducer concept. Bonding results for a new designed connector pin in IGBT-modules achieved by multi- and one-dimensional bonding are discussed.


Remaining useful lifetime prediction based on adaptive failure thresholds

A. Bender, L. Schinke, W. Sextro, in: Proceedings of the 29th European Safety and Reliability Conference (ESREL2019), 2019, pp. 1262-1269

Remaining useful lifetime (RUL) predictions as part of a condition monitoring system are focused in more and more research and industrial applications. To establish an efficient and precise estimate of the RUL of a technical product, different uncertainties have to be handled. To minimize the uncertainties of the RUL estimation, a reliable and accurate prognostic approach as well as a good failure threshold are important. Regarding the failure threshold, most often an expert sets a fixed failure threshold. However, neither the a priori known failure threshold nor a fixedthreshold value are feasible in every application. Especially in the case of varying characteristics of the monitored system, an adaptive failure threshold is of great importance concerning the accuracy of the RUL estimation. Rubber-metal-elements, which are used in a wide range of applications for vibration and sound isolation, are mon-itored by thermocouples to allow for lifetime predictions. Therefore, the element’s state is described by its temper-ature during its service life. Aiming to establish accurate RUL predictions of a rubber-metal-element, uncertainties due to nonlinear material characteristics and changing operational conditions have to be considered. Consequently, different temperature-based failure threshold definitions are implemented and compared within a particle filtering approach.


Modellbasierte und experimentelle Charakterisierung von intensiven Ultraschall-Stehwellenfeldern für die Zerstäubung hochviskoser Flüssigkeiten

P. Dunst, T. Hemsel, P. Bornmann, W.. Littmann, W. Sextro, in: DAGA 2019, 2019

Für die Zerstäubung hochviskoser Flüssigkeiten werden neben Düsenzerstäubern vor allem UltraschallStehwellenzerstäuber angewendet [1]. Diese ermöglichen ohne weitere Maßnahmen zwar keine gerichtete Zerstäubung, benötigen jedoch im Gegensatz zu Düsenzerstäubern keine hohen Drücke und haben keine hohen Austrittsgeschwindigkeiten. Zur Erzeugung der Ultraschallwellen werden typischerweise piezoelektrische, mit Bolzen verschraubte LangevinWandler verwendet [1-4], die eine starke Schallabstrahlung bei einer elektrischen Eingangsleistung von bis zu einigen Kilowatt erzeugen können. Wie bei jedem anderen schwingenden System emittiert der Ultraschallwandler zunächst eine Wanderwelle. Mit einem Reflektor, der gegenüber der Sonotrode angeordnet ist, wird eine stehende Welle erzeugt. Im Resonanzabstand zwischen Reflektor und Wandler werden abgestrahlte und reflektierte Wellen so überlagert, dass höhere Schalldruckamplituden erzielt werden. Ein einfacher Ansatz zur Maximierung des Schallpegels im Stehwellenfeld ist die Erhöhung der Schwingungsamplituden des Wandlers, die jedoch zu Schäden oder zumindest zu einer Verringerung der Lebensdauer führen kann. Hohe Schalldrücke werden auch bei geringen Abständen zwischen Wandler und Reflektor erreicht. Das Volumen des Schallfeldes ist in diesem Fall jedoch für die meisten Prozesse zu klein. Ein weiterer Ansatz ist die Verwendung zweier entgegengesetzt angeordneter Wandler [5]. In diesem Fall erfordert jedoch die Erzeugung einer stehenden Welle eine genaue Abstimmung von Frequenz und Phase beider Wandler, was eine komplexe Steuerung erfordert. Ebenso ist es möglich, geometrische Randbedingungen des Stehwellensystems zu optimieren, sodass es zu optimaler Interferenz der Wellen kommt. Im Folgenden wird der Anschaulichkeit halber vereinfachend angenommen, dass der Wandler an seiner Sonotrodenoberfläche einzelne Schallstrahlen aussendet, die in Nähe des Wandlers nahezu parallel verlaufen und sich mit zunehmender Entfernung vom Wandler auffächern. Ein einfaches Stehwellensystem, bestehend aus ebener Sonotrode und ebenem Reflektor, erzeugt bei kleinem Abstand zwischen Sonotrode und Reflektor sehr hohe Schallpegel, da nahezu sämtliche ausgesandten Schallstrahlen in Richtung der Sonotrode reflektiert werden positive Interferenz entsteht. Erhöht man jedoch den Abstand zwischen Sonotrode und Reflektor, so nehmen die Verluste durch Schallstrahlen, die den Prozessraum verlassen, zu. Wie Abbildung 1 gezeigt, werden nur Schallstrahlen, die in etwa parallel zur Rotationsachse verlaufen, zum Wandler zurück reflektiert und tragen zum Stehwellenfeld bei. Die Strahlen haben zudem abhängig vom Abstrahlwinkel unterschiedliche Weglängen. Die Stehwellenbedingung ist demnach nur für Strahlen in der Nähe der Rotationsachse exakt erfüllt. Um dies zu vermeiden, müssen die Geometrien von Wandler und Reflektor optimiert werden. In den folgenden Abschnitten wird zunächst ein Optimierungsansatz vorgestellt. Mithilfe eines FiniteElemente-Modells werden die Auswirkungen einer optimierten Geometrie auf den maximalen Schalldruckpegel untersucht. Ergebnisse werden durch Messungen an einem experimentellen Aufbau eines Stehwellensystems validiert. Es wird gezeigt, wie sich die Optimierung der geometrischen Randbedingungen auf die Zerstäubung hochviskoser Flüssigkeiten auswirkt.


Digital Twin for Reliability Analysis During Design and Operation of Mechatronic Systems

T. Kaul, A. Bender, W. Sextro, in: Proceedings of the 29th European Safety and Reliability Conference (ESREL2019), 2019, pp. 2340-2347

As the emerging digitalization of technical systems offers immense opportunities to be exploited by means of bigdata analysis, ubiquitous computing and largely networked systems, the digital twin comes into focus to combineall these aspects to an attendant model of an individual system during design phase as well as during operation.Since state-of-art technical systems are growing increasingly complex due to inherent intelligence and increasingfunctionality, i. e. autonomous behavior so far, it becomes considerably challenging to ensure reliability for thosesystems. Many methods were developed to support a reliability focused design or reliability-by-design approachesto tackle this challenge during design process. In field, data-based methods, i. e. condition monitoring enabled bythe rise of machine learning approaches, are exploited to ensure a reliable operation based on the current conditionof the monitored system. In order to take advantage of existing models of system reliability during design phaseand condition monitoring systems during operation, a method is proposed to combine both approaches in order toset up a digital twin with focus on system reliability. The base model of the digital twin is taken from the systemreliability model from the design phase and is used during operation and therein updated to the current reliabilitybased on the state estimation of the condition monitoring system. The approach is illustrated with a case study of arolling bearing test rig.


2018

Intelligent Production of Wire Bonds using Multi-Objective Optimization – Insights, Opportunities and Challenges

A. Unger, M. Hunstig, T. Meyer, M. Brökelmann, W. Sextro, in: In Proceedings of IMAPS 2018 – 51st Symposium on Microelectronics, Pasadena, CA, 2018, 2018

Ultrasonic wire bonding is an indispensable process in the industrial manufacturing of semiconductor devices. Copper wire is increasingly replacing the well-established aluminium wire because of its superior electrical, thermal and mechanical properties. Copper wire processes differ significantly from aluminium processes and are more sensitive to disturbances, which reduces the range of parameter values suitable for a stable process. Disturbances can be compensated by an adaption of process parameters, but finding suitable parameters manually is difficult and time-consuming. This paper presents a physical model of the ultrasonic wire bonding process including the friction contact between tool and wire. This model yields novel insights into the process. A prototype of a multi-objective optimizing bonding machine (MOBM) is presented. It uses multi-objective optimization, based on the complete process model, to automatically select the best operating point as a compromise of concurrent objectives.


A particle filtering approach for temperature based prognostics

A. Bender, W. Sextro, in: Safety and Reliability – Safe Societies in a Changing World, 2018, pp. 1025-1033

Rubber-metal-elements are used in a wide range of applications for vibration and sound isola- tion. Nowadays it is state of the art to calculate the lifetimes of these elements under mechanical stress prior to their service life. To establish more reliable and safer rubber-metal-elements, continuous monitoring by dif- ferent sensors can be used. Especially prognostics enable a rise in reliability, availability and safety. To estab- lish these advantages, estimating the remaining useful lifetime of rubber-metal-elements should be realized during its service life based on current information on its condition. Therefore a suitable measure to monitor the condition of the element is necessary. This work focuses on temperature signals. This approach allows in- cluding the ambient temperature and thereby involving changing operating conditions. For estimating the RUL of rubber-metal-elements a model-based prognostics approach based on particle filtering is proposed. Its performance is analyzed regarding relevant parameters to enable the best performance for the applied data.


Steigerung der Intelligenz mechatronischer Systeme

T. Meyer, T. Kaul, J.K. Kimotho, W. Sextro, Springer Nature Switzerland AG. Part of Springer Nature., 2018, pp. 193-213

Selbstoptimierung bietet die Möglichkeit der autonomen Anpassung des Systemverhaltens an veränderliche Ziele. Dabei ist vor allem der Aspekt Zuverlässigkeit von maßgeblicher Bedeutung, da über einen an die aktuelle Systemzuverlässigkeit angepassten Betriebspunkt die Leistungsfähigkeit verbessert wird, während das Ausfallverhalten besser vorhersehbar wird. Zur Anpassung des Systemverhaltens an die aktuelle Zuverlässigkeit mittels Selbstoptimierung müssen die ersten beiden Schritte des Selbstoptimierungsprozesses unterstützt werden. Für die Analyse der Ist-Situation ist eine Erkennung des aktuellen Degradationszustands mittels Condition Monitoring notwendig. Zur Auswahl geeigneter Verfahren werden bestehende Ansätze hinsichtlich ihrer Eignung klassifiziert. Der zweite Schritt, die Bestimmung der Systemziele, wird durch eine strukturierte Methode zum Finden verlässlichkeitsrelevanter Zielfunktionen ergänzt. Dabei werden kritische Komponenten identifiziert, Optimierungsparameter festgelegt und die Verlässlichkeit in Abhängigkeit des Systemverhaltens quantifiziert. Entwickler selbstoptimierender Systeme werden somit durch geeignete Mittel bei der Implementierung beider Schritte unterstützt. Abschließend wird der praktische Einsatz der vorgestellten Methoden anhand zweier Beispiele gezeigt.


Vibration Assisted Dosing, Mixing and Transport of Dry Fine Powders

P. Dunst, P. Bornmann, T. Hemsel, W. Littmann, W. Sextro, ACTUATOR 2018; 16th International Conference on New Actuators (2018), pp. 142-145

The handling of fine powders is an important task in modern production processes. However, as fine powders strongly tend to adhesion and agglomeration, their processing with conventional methods is difficult or impossible. Especially when processing small amounts of highly sensitive fine powders, conventional methods reach their technical limits. In process steps such as dosing, transport, and especially mixing of fine powders new methods are required. Apart from the well-known method of manipulating powder properties by adding chemical additives, this contribution aims at improving the handling of dry fine powders by using vibrations at different frequencies. Modules are presented, which enable the continuous dosing, the homogeneous mixing and the transport of dry fine powders. Finally, these modules are combined for the production of a homogeneous mixture of two dry fine powders.


Vibration-Assisted Handling of Dry Fine Powders

P. Dunst, P. Bornmann, T. Hemsel, W. Sextro, Actuators 2018, 7(2). (2018), pp. 1-11

Abstract:Since fine powders tend strongly to adhesion and agglomeration, their processing withconventional methods is difficult or impossible. Typically, in order to enable the handling of finepowders, chemicals are added to increase the flowability and reduce adhesion. This contributionshows that instead of additives also vibrations can be used to increase the flowability, to reduceadhesion and cohesion, and thus to enable or improve processes such as precision dosing, mixing,and transport of very fine powders. The methods for manipulating powder properties are describedin detail and prototypes for experimental studies are presented. It is shown that the handling of finepowders can be improved by using low-frequency, high-frequency or a combination of low- andhigh-frequency vibration.


Numerical and statistical investigation of weld formation in a novel two-dimensional copper-copper bonding process

C. Dymel, P. Eichwald, R. Schemmel, T. Hemsel, M. Brökelmann, M. Hunstig, W. Sextro, in: (Proceedings of 7th Electronics System-Integration Technology Conference, Dresden, Germany), 2018, pp. 1-6

State-of-the-art industrial compact high power electronic packages require copper-copper interconnections with larger cross sections made by ultrasonic bonding. In comparison to aluminium-copper, copper-copper interconnections require increased normal forces and ultrasonic power, which might lead to substrate damage due to increased mechanical stresses. One option to raise friction energy without increasing vibration amplitude between wire and substrate or bonding force is the use of two-dimensional vibration. The first part of this contribution reports on the development of a novel bonding system that executes two-dimensional vibrations of a tool-tip to bond a nail- like pin onto a copper substrate. Since intermetallic bonds only form properly when surfaces are clean, oxide free and activated, the geometries of tool-tip and pin were optimised using finite element analysis. To maximize the area of the bonded annulus the distribution of normal pressure was optimized by varying the convexity of the bottom side of the pin. Second, a statistical model obtained from an experimental parameter study shows the influence of different bonding parameters on the bond result. To find bonding parameters with the minimum number of tests, the experiments have been planned using a D-optimal experimental design approach.


Experimental investigations on the impact of bond process parameters in two-dimensional ultrasonic copper bonding

C. Dymel, R. Schemmel, T. Hemsel, W. Sextro, M. Brökelmann, M. Hunstig, in: (Proceedings of 8th Electronics IEEE CPMT Symposium Japan (ICSJ 2018), Kyoto, Japan), 2018, pp. 41-44

Ultrasonic bonding and welding are common friction based approaches in the assembly of power electronics. Interconnections with cross-sections of 0.3 mm² up to 12 mm² made from copper are well suited in high power applications. For increasing friction energy, which is responsible for bond formation, a two-dimensional vibration approach is applied to newly developed interconnection pins. Using two-dimensional vibration for bonding requires identification of suitable bonding parameters. Even though simulation models of wire bonding processes exist, parameters for the two-dimensional pin-bonding process cannot be derived accurately yet. Within this contribution, a methodology and workflow for experimental studies identifying a suitable bond parameter space are presented. The results of a pre-study are used to set up an extensive statistical parameter study, which gives insights about the bond strength change due to bond process parameter variation. By evaluation of electrical data captured during bonding, errors biasing the resulting shear forces are identified. All data obtained during the experimental study is used to build a statistical regression model suitable for predicting shear forces. The accuracy of the regression model’s predictions is determined and the applicability to predict process parameters or validate simulation models is assessed. Finally, the influence of the tool trajectory on the bond formation is determined, comparing one dimensional, elliptic and circular trajectories.


Numerical and experimental investigations in ultrasonic heavy wire bonding

R. Schemmel, T. Hemsel, W. Sextro, in: 6th European Conference on Computational Mechanics (ECCM 6), 2018, pp. 1-12

Ultrasonic wedge/wedge-wire bonding is used to connect electrical terminals of semiconductor modules in power electronics. The wire is clamped with a tool by a normal force and ultrasonic vibration is transmitted through the wire into the interface between wire and substrate. Due to frictional processes contaminations like oxide layers are removed from the contact zone and the surface roughness is reduced, thus the real contact area is increased. In the next step of bond formation, thermomechanical forces create micro-junctions between the wire and substrate and the bond strength increases. The bond parameters like the bond normal force, the ultrasonic vibration amplitude and the geometry of the clamping tool show a high influence on the strength and reliability of the wire bond and need to be investigated in detail. Therefore, in this contribution the dynamical behaviour of the ultrasonic system, the wire and the substrate are modeled in form of substructures, which are connected by the friction contacts between tool and wire and between wire and substrate. Approaches for modelling the time variant contact behaviour, the substrate dynamics, and the model order reduction for a time efficient simulation are described to simulate the full bonding process.


2017

MoRFUS: Mobile Reinigungseinheit für Förderketten basierend auf Ultraschall

R. Schemmel, T. Hemsel, W. Sextro, in: 43. Deutsche Jahrestagung für Akustik, 2017, pp. 611-614

ln der industriellen Fertigung werden zum Transport von Bauteilen häufig Förderketten genutzt. Obwohl die Förderketten meist nicht direkt mit den Arbeitsmedien in Berührung kommen, werden sie indirekt durch vagabundierende Stäube und Pulver, die an der geölten Kette anhaften, im Laufe der Zeit stark verschmutzt. Ein derart im Betrieb verschmutztes Kettenglied ist in Abbildung 1 dargestellt. Um die Lebensdauer der Ketten zu erhöhen und das Herunterfallen von Schmutzpartikel auf die Produkte zu vermeiden, muss die Kette regelmäßig gereinigt werden. Ziel des hier beschriebenen Forschungsvorhabens ist die Entwicklung eines Systems, das in der Lage ist, ein einzelnes Kettenglied in unter 60 s mittels Ultraschall zu reinigen. In [1] wurde in ersten Versuchen nachgewiesen, dass Stabschwinger in Abhängigkeit des Sonotrodenabstands zum Reinigungsobjekt und der Ultraschallamplitude eine intensive Reinigungswirkung entfalten. Das Konzept der Reinigungsanlage sieht deshalb vor, im ersten Schritt die stark verschmutzten Kettenglieder durch ein hochintensives Kavitationsfeld von direkt eingetauchten Stabschwingern vorzureinigen und anschließend schwer zugängliche Be- reiche wie Hinterschneidungen oder Bohrungen mittels konventioneller Tauchschwinger von Verschmutzungen zu befreien. Für den Stabschwinger wird die sogenannte - Sonotrode untersucht; diese wird unter anderem auch in der Sonochemie verwendet. Ein wesentliches Merkmal der Sonotrode ist eine hohe Amplitudenübersetzung bei einer gleichzeitig großen Abstrahlfläche. Neben dem Entwurf mittels der L /2 -Synthese wird die Reinigungswirkung der Sonotrode in Abhängigkeit der Ultraschallamplitude und dem Abstand zum Reinigungsobjekt in einer Versuchsreihe untersucht. Zur genaueren Betrachtung der Reinigungs- mechanismen eines Stabschwingers werden abschließend Hochgeschwindigkeitsaufnahmen vorgestellt und analysieren.


Modellbasierte Prognose der nutzbaren Restlebensdauer von Gummi-Metall-Elementen

A. Bender, J.K. Kimotho, S. Kohl, W. Sextro, K. Reinke, in: 15. Internationale Schienenfahrzeugtagung, 2017, pp. 123-125

In vielen verschiedenen Industriezweigen hat sich Condition Monitoring aufgrund seiner finanziellen und sicherheitstechnischen Vorteile bereits etabliert. Um die Verlässlichkeit und die Auslastung zu steigern, sowie um die Lebenszykluskosten zu reduzieren, steigt auch im Schienenfahrzeugbereich die Anzahl an eingesetzten Condition Monitoring Systemen. Studien zu Versagensmodi von Schienenfahrzeugen haben gezeigt, dass Versagensursachen meistens in den Radprofilen oder im Fahrwerk liegen [1]. Wird das Fahrwerk heute mittels Condition Monitoring überwacht, werden hierfür häufig Sensoren an den Wagons angebracht, um bspw. deren Schwingungen zu kontrollieren [2, 3]. In dieser Arbeit liegt der Fokus auf Gummi-Metall-Elementen (GM-Elementen) der Jörn GmbH.; als elastische Lager im Drehgestell sind diese Teil des Fahrwerks eines Schienenfahrzeugs. Mit dem Ziel die Wartungsplanung dieser Elemente zu optimieren, ist untersucht worden, ob diese Elemente einzeln mittels Condition Monitoring überwacht werden können. Die hierfür durchgeführten beschleunigten Lebensdauertests werden im nächsten Abschnitt erläutert. Anschließend werden die modellbasierten Methoden dargestellt, die aufbauend auf den im Versuch aufgezeichneten Daten eine Prognose der nutzbaren Restlebensdauer (RUL, remaining useful lifetime) der GM-Elemente aufstellen. Im letzten Abschnitt folgen eine kurze Zusammenfassung und ein Ausblick.


Neuartiges Konzept zur Lebensdauerprognose von Gummi-Metall-Elementen

A. Bender, W. Sextro, K. Reinke, in: VDI-Berichte 2301, 2017, pp. 49-60

In der Windenergieindustrie haben die Größen Zuverlässigkeit, Sicherheit und Verfügbarkeit eine enorme Bedeutung erlangt aufgrund des Trends Windenergieanlagen zur optimalen Windausnutzung an schwer zugänglichen Positionen aufzustellen, wie bspw. Offshore. Dies führt zu erschwerten Wartungsbedingungen und damit zu höheren Kosten. Der Einsatz von Condition Monitoring hat sich in dieser Industrie etabliert, denn diese Technik ermöglicht eine Zustandsdiagnose des überwachten Systems und eine Prognose seiner nutzbaren Restlebensdauer (remaining useful life: RUL), jeweils basierend auf geeigneten Sensordaten. In dieser Arbeit wird ein Konzept für ein produktspezifisches Condition-Monitoring-System für Gummi-Metall-Elemente (GM-Elemente) vorgestellt, welches den Schwerpunkt auf die Prognose der RUL dieser Elemente setzt. In Windenergieanlagen werden zahlreiche GM-Elemente zur Geräusch- und Schwingungsisolation verwendet. Der Einsatz des hier vorgestellten produktspezifischen Condition-Monitoring-Systems kann somit einen erheblichen Beitrag zum verlässlichen Betrieb von Windenergieanlagen liefern, da die Überwachung einzelner Komponenten in die Zustandsüberwachung der gesamten Anlage integriert und dadurch der Betrieb der Anlage optimiert werden kann. In dieser Arbeit werden einige Herausforderungen diskutiert, die sich bei der Entwicklung eines Condition-Monitoring-Systems für GM-Elemente ergeben. So wird evaluiert, welche Größen sich zur Beschreibung der Alterung eines spezifischen Elements eignen und wie diese gemessen werden können. Temperaturen werden bereits in einigen technischen Systemen, wie auch in Windenergieanlagen, aufgezeichnet und ausgewertet, aber ihr Potential für die Bestimmung der RUL der überwachten Komponente ist noch nicht ausgeschöpft. Hier wird eine Lösungsmöglichkeit vorgestellt, die auf Temperatursensoren aufbaut. Als Grundlage für die Entwicklung des Condition-Monitoring-Systems wurden beschleunigte Lebensdauerversuche der GM-Elemente auf einem Versuchsstand zur Schwingungsanalyse durchgeführt. In diesen Lebensdauerversuchen wird die mechanische Alterung eines GM-Elements über einen kraftgeregelten Hydraulikzylinder erzielt. Dabei wird das Ende der Lebensdauerversuche in einem ersten Schritt über die Wegamplitude des Zylinders bestimmt. Während dieser Versuche wurden diverse Sensoren eingesetzt. Die aufgezeichneten Temperaturdaten zeigen, dass sich Temperaturmessungen eignen die Lebensdauer von GM-Elementen mittels Condition Monitoring Prognosemethoden zu schätzen.


Model based optimization of dynamics in adaptive headlamps

S. Schulze, W. Sextro, K. Kister, in: Proceedings of the 12th International Symposium on Automotive Lighting 2017, 2017


Formulation of reliability-related objective functions for design of intelligent mechatronic systems

T. Kaul, T. Meyer, W. Sextro, SAGE Journals (2017), Vol. 231(4), pp. 390 - 399

State-of-the-art mechatronic systems offer inherent intelligence that enables them to autonomously adapt their behavior to current environmental conditions and to their own system state. This autonomous behavior adaptation is made possible by software in combination with complex sensor and actuator systems and by sophisticated information processing, all of which make these systems increasingly complex. This increasing complexity makes the design process a challenging task and brings new complex possibilities for operation and maintenance. However, with the risk of increased system complexity also comes the chance to adapt system behavior based on current reliability, which in turn increases reliability. The development of such an adaption strategy requires appropriate methods to evaluate reliability based on currently selected system behavior. A common approach to implement such adaptivity is to base system behavior on different working points that are obtained using multiobjective optimization. During operation, selection among these allows a changed operating strategy. To allow for multiobjective optimization, an accurate system model including system reliability is required. This model is repeatedly evaluated by the optimization algorithm. At present, modeling of system reliability and synchronization of the models of behavior and reliability is a laborious manual task and thus very error-prone. Since system behavior is crucial for system reliability, an integrated model is introduced that integrates system behavior and system reliability. The proposed approach is used to formulate reliability-related objective functions for a clutch test rig that are used to compute feasible working points using multiobjective optimization.


Entwicklung eines Condition Monitoring Systems für Gummi-Metall-Elemente

A. Bender, T. Kaul, W. Sextro, in: Verlagsschriftenreihe des Heinz Nixdorf Instituts Band 369, Paderborn, 2017, 2017, pp. 347-358

Zuverlässigkeit, Sicherheit und Verfügbarkeit gewinnen bei der Anwendung von technischen Systemen eine immer größere Bedeutung. Aus diesem Grund hat sich Condition Monitoring, die Zustandsüberwachung eines technischen Produkts, in verschiedenen Industriebranchen etabliert. Die sensorbasierte Überwachung eines Produkts während seiner Betriebsdauer in Kombination mit Condition Monitoring Methoden ermöglichen die Bestimmung des aktuellen Zustands des Produkts und somit eine Diagnose, ob das Produkt seine ihm zugeschriebene Funktion zum aktuellen Zeitpunkt erfüllt. Neben Diagnosen bietet Condition Monitoring auch die Möglichkeit Prognosen aufzustellen, dabei wird die restliche Nutzungsdauer des Produkts aufbauend auf geeigneten Sensordaten geschätzt. So kann eine intelligente Wartungsplanung umgesetzt werden, die im Gegensatz zu klassischen Ansätzen keine festen Wartungsintervalle benötigt und die Nachteile einer rein reaktiven Wartung kompensiert. Stattdessen ist es möglich ein Element bis vor das Ende seiner Lebensdauer zu nutzen und erst dann zu warten, um eine optimale Nutzung zu gewährleisten. Durch eine Bestimmung der verbleibenden Restlebensdauer während des Betriebs ist eine optimale Wartungsplanung möglich, wodurch die Verfügbarkeit und die Auslastung der überwachten Produkte signifikant gesteigert werden kann. In dieser Arbeit soll ein produktspezifisches Condition Monitoring System für Gummi-Metall-Elemente entwickelt werden. Diese Elemente werden zur Federung, Geräusch- und/oder Schwingungsisolation in vielen verschiedenen Anwendungen eingesetzt, wie bspw. in Nutz- und Schienenfahrzeugen oder Windenergieanlagen. In Industrie und Forschung werden bereits Zustandsüberwachungen von Systemen mit integrierten Gummi-Metall-Elementen eingesetzt, allerdings noch keine Condition Monitoring Systeme zur alleinigen Zustandsüberwachung dieser Elemente. Aktuell ist es üblich die Lebensdauer dieser Elemente aufbauend auf beschleunigten Lebensdauerversuchen und Erfahrungswerten abzuschätzen. Mit dem Ziel die Lebensdauer des fokussierten Produkts präziser vorherzusagen und damit eine intelligente Wartungsplanung zu ermöglichen, wird die Entwicklung eines Condition Monitoring Systems für Gummi-Metall-Elemente angestrebt und in dieser Arbeit erläutert.


Analysis of pipe vibration in an ultrasonic powder transportationsystem

P. Dunst, T. Hemsel, W. Sextro, elsevier (2017), Sensors and Actuators A 263, pp. 733-736

The transportation of dry fine powders is an emerging technologic task, as in biotechnology, pharmaceu-tical and coatings industry the particle sizes of processed powders get smaller and smaller. Fine powdersare primarily defined by the fact that adhesive and cohesive forces outweigh the weight forces, leadingto mostly unwanted agglomeration (clumping) and adhesion to surfaces. Thereby it gets more difficult touse conventional conveyor systems (e.g. pneumatic or vibratory conveyors) for transport. A rather newmethod for transporting these fine powders is based on ultrasonic vibrations, which are used to reducefriction between powder and substrate. Within this contribution an experimental set-up consisting of apipe, a solenoid actuator for axial vibration and an annular piezoelectric actuator for the high frequencyradial vibration of the pipe is described. Since amplitudes of the radial pipe vibration should be as large aspossible to get high effects of friction reduction, the pipe is excited to vibrate in resonance. To determinethe optimum excitation frequency and actuator position the vibration modes and resonance frequenciesof the pipe are calculated and measured. Results are in good accordance.


Multi-dimensional Ultrasonic Copper Bonding – New Challenges for Tool Design

P. Eichwald, S. Althoff, R. Schemmel, W. Sextro, A. Unger, M. Brökelmann, M. Hunstig, IMAPSource (2017), Vol. 2017, No. 1

In power electronics, copper connector pins are e.g. used to connect control boards with power modules. The new chip generation based on SiC and GaN technology increase the power density of semiconductor modules significantly with junction temperatures reaching 200°C. To enable reliable operation at such high temperature, the soldering of these connector pins should be substituted by a multi-dimensional copper-copper bonding technology. A copper pin welded directly on DBC substrate also simplifies the assembly. With this aim, a proper bond tool and a suitable connector pin geometry are designed. This paper presents a two-dimensional trajectory approach for ultrasonic bonding of copper pieces, e.g. connector pins, with the intention to minimize mechanical stresses exposed to the substrate. This is achieved using a multi-dimensional vibration system with multiple transducers known from flip chip bonding. Applying a planar relative motion between the bonding piece and the substrate increases the induced frictional power compared to one-dimensional excitation. The core of this work is the development of a new tool design which enables a reliable and effective transmission of the multidimensional vibration into the contact area between nail-shaped bonding piece and substrate. For this purpose, different bonding tool as well as bonding piece designs are discussed. A proper bonding tool design is selected based on the simulated alternatives. This tool is examined in bonding experiments and the results are presented. In addition, different grades of hardness for bonding piece and substrate are examined as well as different bonding parameters. Optical inspection of the bonded area shows the emergence of initial micro welds in form of a ring which is growing in direction of the interface boundaries with increasing bonding duration.


Estimation of Remaining Useful Lifetime of Piezoelectric Transducers Based on Self-Sensing

J.K. Kimotho, W. Sextro, T. Hemsel, in: IEEE Transactions on Reliability, 2017, pp. 1 - 10

Piezoelectric transducers are used in a wide range of applications. Reliability of these transducers is an important aspect in their application. Prognostics, which involve continuous monitoring of the health of technical systems and using this information to estimate the current health state and consequently predict the remaining useful lifetime (RUL), can be used to increase the reliability, safety, and availability of the transducers. This is achieved by utilizing the health state and RUL predictions to adaptively control the usage of the components or to schedule appropriate maintenance without interrupting operation. In this work, a prognostic approach utilizing self-sensing, where electric signals of a piezoelectric transducer are used as the condition monitoring data, is proposed. The approach involves training machine learning algorithms to model the degradation of the transducers through a health index and the use of the learned model to estimate the health index of similar transducers. The current health index is then used to estimate RUL of test components. The feasibility of the approach is demonstrated using piezoelectric bimorphs and the results show that the method is accurate in predicting the health index and RUL.


Patent - DE: 10 2017 000 926.0. Gerät mit wenigstens einem elastisch verformbaren Bauteil, insbesondere einem Gummi-Metall-Lager und mit einer Einrichtung zur Feststellung des Beginns einer verschleißbedingten Bauteil-Restnutzungsdauer, sowie Verfahren zur Bestimmung der Bauteil-Restnutzungsdauer.

K. Reinke, A. Bender, T. Meyer, W. Sextro, J.K. Kimotho. Patent - DE: 10 2017 000 926.0. Gerät mit wenigstens einem elastisch verformbaren Bauteil, insbesondere einem Gummi-Metall-Lager und mit einer Einrichtung zur Feststellung des Beginns einer verschleißbedingten Bauteil-Restnutzungsdauer, sowie Verfahren zur Bestimmung der Bauteil-Restnutzungsdauer., Patent DE: 10 2017 000 926.0. 2017.

Die Erfindung betrifft ein Gerät mit wenigstens einem elastisch verformbaren Bauteil als Strukturteil und/oder Lagerteil, auf das im Betriebsverlauf von wechselnden Betriebszuständen abhängige, unterschiedliche Verformungskräfte einwirken, die zu einem die Bauteilnutzungsdauer begrenzenden Bauteilverschleiß führen, und mit einer Einrichtung zur Bestimmung der Bauteilnutzungsdauer und einer verschleißbedingten Bauteil-Restnutzungsdauer. Erfindungsgemäß wird ein sich zeitversetzt wiederholender, jeweils gleicher Betriebszustand vorbestimmt, dem eine jeweils gleiche, periodisch wirkende Verformungskraft zugeordnet ist, durch die das elastisch verformbare Bauteilmaterial periodisch verformt wird, wobei durch Walkarbeit ein Energieeintrag mit einem messbaren Temperaturanstieg im Vergleich zu einer Umgebungstemperatur erfolgt und wobei der jeweilige Temperaturanstieg als Kenngröße im Verlauf einer Bauteilnutzungsdauer entsprechend einer abnehmenden Bauteilsteifigkeit größer wird. Ein solcher vorbestimmter Betriebszustand wird jeweils von einer Messund Auswerteeinheit erkannt und ein Messvorgang durch ein Startsignal selbsttätig gestartet, wobei mit wenigstens einem bauteilzugeordneten Temperatursensor, der aktuelle Temperaturanstieg im Vergleich zur Umgebungstemperatur als Kenngröße für eine aktuelle Bauteilsteifigkeit gemessen und jeweils in einer Messkurve gespeichert und verglichen wird.


Entwicklung verlässlicher, intelligenter Systeme

W. Sextro, T. Meyer, T. Kaul, J.K. Kimotho, in: VDI-Berichte 2307–28. Tagung Technische Zuverlässigkeit (TTZ 2017) - Entwicklung und Betrieb zuverlässiger Produkte., 2017, pp. 17–30

Intelligente technische Systeme sind durch einen erhöhten Funktionsumfang charakterisiert, der diese dazu befähigt, autonom auf wechselnde Umgebungsbedingungen, Anforderungen und inhärente Systemzustände zu reagieren. Dies kann mit den Methoden der Selbstoptimie-rung erreicht werden. Hier werden mit Verfahren der Mehrzieloptimierung mögliche Betriebs-punkte des Systems bestimmt zwischen denen das System im Betrieb autonom auswählt und somit eine Verhaltensadaption erwirkt. Zur Berechnung der Betriebspunkte ist es notwendig ein Modell des Systemverhaltens aufzustellen und das Verhalten hinsichtlich verschiedener, meist konfliktärer, Ziele zu quantifizieren. Bei der Modellierung des Systemverhaltens und der Formulierung der Ziele stellt die Absiche-rung der Verlässlichkeit auf Grund der zunehmenden Systemkomplexität eine große Heraus-forderung dar, der im Entwicklungsprozess begegnet werden muss. Die Implementierung von Selbstoptimierung bietet darüber hinaus in Kombination mit einer Zustandsüberwachung im Betrieb die Möglichkeit einer zuverlässigkeitsbasierten Verhaltensanpassung, deren Potential zu einer Steigerung der Verlässlichkeit genutzt werden kann. In dieser Arbeit werden die Entwicklung intelligenter technischer Systeme und die damit ver-bundenen notwendigen Entwicklungsschritte zur Absicherung der Verlässlichkeit anhand von selbstoptimierenden Systemen betrachtet. Dazu gehören die Formulierung verlässlichkeitsre-levanter Ziele und die Implementierung einer Zustandsüberwachung als Basis für eine zuver-lässigkeitsbasierte Verhaltensanpassung. Es werden auf Grundlage einer Beschreibung der Entwicklungsschritte, Potentiale zur Steigerung der Verlässlichkeit sowie Chancen und zukünf-tige Herausforderungen herausgestellt und diskutiert.


Patent - DE: 10 2017 000 925.2. Gerät mit wenigstens einem elastisch verformbaren Bauteil, insbesondere einem Gummi-Metall-Lager und mit einer Einrichtung zur Feststellung des Beginns einer verschleißbedingten Bauteil-Restnutzungsdauer, sowie Verfahren zur Bestimmung der Bauteil-Restnutzungsdauer

K. Reinke, A. Bender, T. Meyer, W. Sextro, J.K. Kimotho. Patent - DE: 10 2017 000 925.2. Gerät mit wenigstens einem elastisch verformbaren Bauteil, insbesondere einem Gummi-Metall-Lager und mit einer Einrichtung zur Feststellung des Beginns einer verschleißbedingten Bauteil-Restnutzungsdauer, sowie Verfahren zur Bestimmung der Bauteil-Restnutzungsdauer, Patent DE: 10 2017 000 925.2. 2017.

Die Erfindung betrifft ein Gerät mit wenigstens einem elastisch verformbaren Bauteil als Strukturteil und/oder Lagerteil, auf das im Betriebsverlauf von wechselnden Betriebszuständen abhängige, unterschiedliche Verformungskräfte einwirken, die zu einem die Bauteilnutzungsdauer begrenzenden Bauteilverschleiß führen, und mit einer Einrichtung zur Bestimmung der Bauteilnutzungsdauer und einer verschleißbedingten Bauteil-Restnutzungsdauer. Erfindungsgemäß wird ein sich zeitversetzt wiederholender, jeweils gleicher Betriebszustand vorbestimmt, dem eine jeweils gleiche Verformungskraft zugeordnet ist, durch die das elastisch verformbare Bauteilmaterial verformt wird. Ein solcher vorbestimmter Betriebszustand wird jeweils von einer Mess- und Auswerteeinheit erkannt und ein Messvorgang durch ein Startsignal selbsttätig gestartet, wobei mit wenigstens einem bauteilzugeordneten Beschleunigungssensor, die aktuelle Beschleunigung der Verformung oder daraus abgeleitete Kennwerte als Kenngröße für eine aktuelle Bauteilsteifigkeit gemessen und jeweils in einer Messkurve gespeichert und verglichen wird.


Integrated modeling og behavior and reliability in system development

J. Hentze, T. Kaul, I. Grässler, W. Sextro, in: ICED17, 21st International conference on enginieering design, 2017, pp. 385-394

The integrated modeling of behavior and reliability in system development delivers a model-based approach for reliability investigation by taking into account the dynamic system behavior as well as the system architecture at different phases of the development process. This approach features an automated synthesis of a reliability model out of a behavior model enabling for the closed loop modeling of degradation of the system and its (dynamic) behavior. The approach is integrated into the development process following Systems Engineering. It is based on standard models used in model-based development methodologies i.e. SysML or Matlab/Simulink. In addition to the theoretical description of the necessary steps the procedure is validated by an application example at two stages of the development process.


2016

Aspects of Flexible Viscoelastic Suspension Modeling for Frictional Rolling Contact Analysis using ADAMS

S. Kohl, W. Sextro, S. Schulze, in: The 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV 2016), Cyberjaya, Malaysia, 2016., 2016, pp. 1-12

Tire-wheel assembly is the only connection between road and vehicle. Contacting directly with road within postcard size of contact area, it is mounted and guided by the suspension system. Therefore kinematics and compliances of suspension system greatly influence the frictional coupling of tire tread elements and road surface asperities by affecting pressure and sliding velocity distribution in the contact zone. This study emphasizes the development of a numerical methodology for frictional rolling contact analysis with focus on interaction of suspension system dynamics and tire-road contact using ADAMS. For this purpose a comprehensive flexible multibody system of the multi-link rear suspension is established, where both flexible and rigid bodies are modeled to allow large displacements with included elastic effects. To meet accuracy requirements for the high frequency applications, such as road excitations, the amplitude- and frequency-dependency of rubber-metal bushings is included. Furthermore the proposed flexible viscoelastic suspension model is enhanced by a Flexible Ring Tire Model (FTire), which describes a 3D tire dynamic response and covers any road excitations by tread submodel connected to road surface model. Concerning the verification and validation procedure numerous experiments are carried out to confirm the validity and the accuracy of both the developed submodels and the entire model. The devised approach makes it possible to investigate the influence of suspension system design on dynamical rolling contact and to evaluate tire tread wear. Therefore it can be a useful tool to predict frictional power distribution within the contact area under more realistic conditions.


Validated Simulation of the Ultrasonic Wire Bonding Process

A. Unger, R. Schemmel, T. Meyer, F. Eacock, P. Eichwald, S. Althoff, W. Sextro, M. Brökelmann, M. Hunstig, K. Guth, in: Wear Modeling in Copper Wire Wedge Bonding. IEEE CPMT Symposium Japan, 2016, 2016, pp. 251-254

To increase quality and reliability of copper wire bonds, self-optimization is a promising technique. For the implementation of self-optimization for ultrasonic heavy copper wire bonding machines, a model of stick-slip motion between tool and wire and between wire and substrate during the bonding process is essential. Investigations confirm that both of these contacts do indeed show stick-slip movement in each period oscillation. In a first step, this paper shows the importance of modeling the stick-slip effect by determining, monitoring and analyzing amplitudes and phase angles of tooltip, wire and substrate experimentally during bonding via laser measurements. In a second step, the paper presents a dynamic model which has been parameterized using an iterative numerical parameter identification method. This model includes Archard’s wear approach in order to compute the lost volume of tool tip due to wear over the entire process time. A validation of the model by comparing measured and calculated amplitudes of tool tip and wire reveals high model quality. Then it is then possible to calculate the lifetime of the tool for different process parameters, i.e. values of normal force and ultrasonic voltage.


Kupferbondverbindungen intelligent herstellen

M. Brökelmann, A. Unger, T. Meyer, S. Althoff, W. Sextro, M. Hunstig, F. Biermann, K. Guth, wt-online (2016), 7/8, pp. 512-519

Leistungshalbleitermodule werden leistungsfähiger, effizienter, kompakter und haltbarer Ziel dieses Innovationsprojekts des Spitzenclusters „it’s OWL – Intelligente Technische Systeme OstWestfalen-Lippe“ ist die Entwicklung von selbstoptimierenden Verfahren, um unter variablen Produktionsbedingungen zuverlässige Kupferbondverbindungen herstellen zu können. Die Ultraschall-Drahtbondmaschine erhält die Fähigkeit, sich automatisch an veränderte Bedingungen anzupassen. Hierzu wird der gesamte Prozess der Ultraschall-Verbindungsbildung modelliert und neueste Verfahren der Selbstoptimierung angewandt. Die Evaluierung erfolgt anhand eines Prototypen in Form einer modifizierten Bondmaschine. Intelligent production of heavy copper wire bonds It is the aim of this innovation-project to develop a self-optimization system for ultrasonic copper wire bonding. It is part of the leading edge cluster “it’s OWL”. The bonding machine will be able to react autonomously to changing boundary conditions to ensure constant and reliable bonding results. For this, the hole bonding process is modeled in great detail and newest self-optimization techniques are utilized. A prototype-system incorporated in a serial machine is used for evaluation.


Condition Monitoring of Bearing Damage in Electromechanical Drive Systems by Using Motor Current Signals of Electric Motors: A Benchmark Data Set for Data-Driven Classification

C. Lessmeier, J.K. Kimotho, D. Zimmer, W. Sextro, in: European Conference of the Prognostics and Health Management Society, 2016

This paper presents a benchmark data set for condition monitoring of rolling bearings in combination with an extensive description of the corresponding bearing damage, the data set generation by experiments and results of datadriven classifications used as a diagnostic method. The diagnostic method uses the motor current signal of an electromechanical drive system for bearing diagnostic. The advantage of this approach in general is that no additional sensors are required, as current measurements can be performed in existing frequency inverters. This will help to reduce the cost of future condition monitoring systems. A particular novelty of the present approach is the monitoring of damage in external bearings which are installed in the drive system but outside the electric motor. Nevertheless, the motor current signal is used as input for the detection of the damage. Moreover, a wide distribution of bearing damage is considered for the benchmark data set. The results of the classifications show that the motor current signal can be used to identify and classify bearing damage within the drive system. However, the classification accuracy is still low compared to classifications based on vibration signals. Further, dependency on properties of those bearing damage that were used for the generation of training data are observed, because training with data of artificially generated and real bearing damages lead to different accuracies. Altogether a verified and systematically generated data set is presented and published online for further research


Transportation of dry fine powders by coordinated friction manipulation

P. Dunst, W. Sextro, P. Bornmann, T. Hemsel, W. Littmann, in: PAMM Proc. Appl. Math. Mech. 16, 2016, pp. 635-636

The transportation of dry fine powders is an emerging technologic task, as in biotechnology, pharmaceutical or coatings industry particle sizes of processed powders are getting smaller and smaller. Fine powders are primarily defined by the fact that adhesive and cohesive forces outweigh the weight forces. This leads to mostly unwanted agglomeration (clumping) and adhesion to surfaces, what makes it more difficult to use conventional conveyor systems (e. g. pneumatic or vibratory conveyors) for transport. A rather new method for transporting these fine powders is based on ultrasonic vibrations, which are used to reduce friction and adhesion between powder and the substrate. One very effective set-up consists of a pipe, which vibrates harmoniously in axial direction at low frequency combined with a pulsed radial high frequency vibration. The high frequency vibration accelerates the particles perpendicular to the surface of the pipe, which in average leads to lower normal and thereby smaller friction force. With coordinated friction manipulation the powder acceleration can be varied so that the powder may be greatly accelerated and only slightly decelerated in each excitation period of the low frequency axial vibration of the pipe. The amount of powder flow is adjustable by vibration amplitudes, frequencies, and pulse rate, which makes the device versatile for comparable high volume and fine dosing using one setup. Within this contribution an experimental set-up consisting of a pipe, a solenoid actuator for axial vibration and a piezoelectric actuator for the radial high frequency vibration is described. An analytical model is shown, that simulates the powder velocity. Finally, simulation results are validated by experimental data for different driving parameters such as amplitude of low frequency vibration, pipe material and inclination angle.


Micro Wear Modeling in Copper Wire Wedge Bonding

P. Eichwald, A. Unger, F. Eacock, S. Althoff, W. Sextro, K. Guth, M. Brökelmann, in: IEEE CPMT Symposium Japan, 2016, 2016

Ultrasonic wire bonding is a common technology for connecting electrodes of electronic components like power modules. Nowadays, bond connections are often made of copper instead of aluminum due to its thermal and mechanical assets. One of the main cost factors in the wire bonding process is the acquisition cost of consumables such as bonding tools. For copper wire bonding tool lifetime is much lower than for aluminium bonding. This paper presents a micro wear model for wedge/wedge bonding tools that was validated by observing wear patterns with a scanning electron microscope. The wear coefficient is determined in long-term bonding tests. The application of Fleischer´s wear approach incorporating frictional power to a finite element simulation of the bonding processes is used to shift element nodes depending on the rising frictional power for finite element modeling. The presented simulation method can be used to take tool wear into consideration for creating tools with increased lifetime. This enables the production of reliable bond connections using heavy as well as thin wire of any material. The paper discusses the predominant influences of wear on the main tool functions and their changes over tool life. Furthermore, the influence of the tool groove angle on the tool wear was investigated. One of the main results is that the wear is largest during the last phase of each bonding process, when the contact area between tool and wire is largest.


Reliable Manufacturing of Heavy Copper Wire Bonds Using Online Parameter Adaptation

T. Meyer , A. Unger, S. Althoff, W. Sextro, M. Brökelmann, in: IEEE 66th Electronic Components and Technology Conference, 2016, pp. 622-628

Usage of copper wire bonds allows to push power boundaries imposed by aluminum wire bonds. Copper allows higher electrical, thermal and mechanical loads than aluminum, which currently is the most commonly used material in heavy wire bonding. This is the main driving factor for increased usage of copper in high power applications such as wind turbines, locomotives or electric vehicles. At the same time, usage of copper also increases tool wear and reduces the range of parameter values for a stable process, making the process more challenging. To overcome these drawbacks, parameter adaptation at runtime using self-optimization is desired. A self-optimizing system is based on system objectives that evaluate and quantify system performance. System parameters can be changed at runtime such that pre-selected objective values are reached. For adaptation of bond process parameters, model-based self-optimization is employed. Since it is based on a model of the system, the bond process was modeled. In addition to static model parameters such as wire and substrate material properties and vibration characteristics of transducer and tool, variable model inputs are process parameters. Main simulation result is bonded area in the wiresubstrate contact. This model is then used to find valid and optimal working points before operation. The working point is composed of normal force and ultrasonic voltage trajectories, which are usually determined experimentally. Instead, multiobjective optimalization is used to compute trajectories that simultaneously optimize bond quality, process duration, tool wear and probability of tool-substrate contacts. The values of these objectives are computed using the process model. At runtime, selection among pre-determined optimal working points is sufficient to prioritize individual objectives. This way, the computationally expensive process of numerically solving a multiobjective optimal control problem and the demanding high speed bonding process are separated. To evaluate to what extent the pre-defined goals of self-optimization are met, an offthe- shelf heavy wire bonding machine was modified to allow for parameter adaptation and for transmitting of measurement data at runtime. This data is received by an external computer system and evaluated to select a new working point. Then, new process parameters are sent to the modified bonding machine for use for subsequent bonds. With these components, a full self-optimizing system has been implemented.


Modeling of Complex Redundancy in Technical Systems with Bayesian Networks

T. Kaul, T. Meyer, W. Sextro, in: Proceedings of the Third European Conference of the Prognostics and Health Management Society 2016, 2016

Redundancy is a common approach to improve system reliability, availability and safety in technical systems. It is achieved by adding functionally equivalent elements that enable the system to remain operational even though one or more of those elements fail. This paper begins with an overview on the various terminologies and methods for redundancy concepts that can be modeled sufficiently using established reliability analysis methods. However, these approaches yield very complex system models, which limits their applicability. In current research, Bayesian Networks (BNs), especially Dynamic Bayesian Networks (DBNs) have been successfully used for reliability analysis because of their benefits in modeling complex systems and in representing multi-state variables. However, these approaches lack appropriate methods to model all commonly used redundancy concepts. To overcome this limitation, three different modeling approaches based on BNs and DBNs are described in this paper. Addressing those approaches, the benefits and limitations of BNs and DBNs for modeling reliability of redundant technical systems are discussed and evaluated.


Using Adequate Reduced Models for Flexible Multibody Systems of Automotive Mechatronic Systems

S. Schulze, W. Sextro, S. Kohl, in: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV) Malaysia 2016, 2016, pp. 1-11

Multibody models of mechatronic systems are usually interdisciplinary and are continuously gaining complexity, due to a growing demand for comprehensive models of systems including effects of electro mechanics, elastic bodies, contacts and friction. To be capable of simulating large models with subassemblies and contact between bodies, reduction techniques are required, which need certain experience in the choice of parameters. This publication discusses different possibilities for the modal description of structures in flexible multibody models with application to an Adaptive Frontlighting System in ADAMS. It will be shown that mode count, assembling of structures before and after modal reduction and influence of damping parameters of particular structures and subassemblies affect the behavior of the entire system. A common reduction technique for flexible structures in multibody models is the component mode synthesis, which uses a certain number of modes for description of the modal behavior of a structure. The influence of the mode count will be shown by means of different modal descriptions of one structure that contributes to a comprehensive model. Another study will prove that modal data of subassemblies and assemblies of modal reduced single structures lead to different models. The definition of damping parameters depends on the number of structures that have been added to an assembly before modal reduction and on the number of modal reduced structures. The comparison of subassemblies and the entire model to experimental data will highlight the accuracy, computational overhead, complexity of models and modeling efficiency of the comprehensive model for the frontlighting system.


Shape-Dependent Transmittable Tangential Force of Wire Bond Tools

S. Althoff, T. Meyer, A. Unger, W. Sextro, F. Eacock, in: IEEE 66th Electronic Components and Technology Conference, 2016, pp. 2103-2110

Wire bonding has been an established packaging technology for decades. When introducing copper as wire material for high power applications, adaptations to the bonding process and to machines became necessary. Here, challenges occur due to the stiffer wire material and changing oxide layers on the contact partners. To achieve sufficient process stability, a clean bond area is required, which can only be achieved with high shear stresses in the contact partners surfaces. These necessitate high normal forces to plastically deform the wire and substrate. To achieve such high stresses in the contact area, the bonding tool needs to be able to transmit the needed tangential forces to the top side of the wire. The wire itself performs a shear movement and transmits the force into the contact area to clean the contaminant and oxide layers and to level the desired bond surfaces. The main function of the tool is to transmit these forces. If the bond tool can only transmit low forces in the direction of excitation, the parameter space for a stable bond process is severely restricted. Here, a modeling approach to estimate how well different tool shapes meet the demand of transmitting high tangential forces is presented. The model depends on wire deformation and thus on the ultrasonic softening effect.


2015

Advantages of reliability-adaptive system operation for maintenance planning

T. Meyer, T. Kaul, W. Sextro, in: Proceedings of the 9th IFAC Symposium on Fault Detection, Supervision and Safety for Technical Processes, 2015, pp. 940-945

Intelligent mechatronic systems other the possibility to adapt system behavior to current dependability. This can be used to assure reliability by controlling system behavior to reach a pre-defined lifetime. By using such closed loop control, the margin of error of useful lifetime of an individual system is lowered. It is also possible to change the pre-defined lifetime during operation, by adapting system behavior to derate component usage. When planning maintenance actions, the remaining useful lifetime of each individual system has to be taken into account. Usually, stochastic properties of a fleet of systems are analyzed to create maintenance plans. Among these, the main factor is the probability of an individual system to last until maintenance. If condition-based maintenance is used, this is updated for each individual system using available information about its current state. By lowering the margin of error of useful lifetime, which directly corresponds to the time until maintenance, extended maintenance periods are made possible. Also using reliability-adaptive operation, a reversal of degradation driven maintenance planning is possible where a maintenance plan is setup not only according to system properties, but mainly to requirements imposed by maintenance personnel or infrastructure. Each system then adapts its behavior accordingly and fails according to the maintenance plan, making better use of maintenance personnel and system capabilities at the same time. In this contribution, the potential of maintenance plan driven system behavior adaptation is shown. A model including adaptation process and maintenance actions is simulated over full system lifetime to assess the advantages gained.


Kavitationsdetektion mittels Self-Sensing-Ultraschallwandler

P. Bornmann, T. Hemsel, W. Sextro, G. Memoli, M. Hodnett, B. Zeqiri, tm - Technisches Messen (2015), 82(2), pp. 73-84

Eine Vielzahl von Prozessen in der Chemie und Verfahrenstechnik kann durch Ultraschall positiv beeinflusst werden. Oftmals ist ultraschallinduzierte Kavitation der Hauptwirkmechanismus für die positiven Effekte der Beschallung. Daher ist es notwendig die Kavitationsaktivität während des Prozesses zu quantifizieren um die Beschallung für den jeweiligen Prozess optimal gestalten und überwachen zu können. Eine Möglichkeit der prozessbegleitenden Kavitationsdetektion ist die Auswertung der akustischen Emissionen von oszillierenden und kollabierenden Kavitationsblasen mittels Drucksensoren in der Flüssigkeit. Raue Prozessrandbedingungen wie hohe Temperaturen oder aggressive Flüssigkeiten erschweren es jedoch geeignete Sensoren zu finden. Als Alternative wurde daher die Nutzbarkeit der Rückwirkung von Kavitationsereignissen auf das elektrische Eingansgssignal des Ultraschallwandlers zur Quantifizierung von Kavitation untersucht. Die experimentelle Analyse hat ergeben, dass das Einsetzen und in einigen Fällen auch die Art der Kavitation auf Basis der Rückwirkung auf das Stromsignal des Ultraschallwandlers bestimmt werden kann. Die Stärke der Kavitation war hingegen nicht aus den Stromsignalen abzuleiten.


Modeling and simulation of the ultrasonic wire bonding process

T. Meyer, A. Unger, S. Althoff, W. Sextro, M. Brökelmann, in: 2015 17th Electronics Packaging Technology Conference, 2015

Ultrasonic wire bonding is an indispensable process in the manufacturing of semiconductor components. It is used for interconnecting the silicon die to e.g. connectors in the housing or to other semiconductors in complex components. In high power applications, such as wind turbines, locomotives or electric vehicles, the thermal and mechanical limits of interconnects made from aluminum are nearing. The limits could be overcome using copper wire bonds, but their manufacturing poses challenges due to the harder material, which leads to increased wear of the bond tools and to less reliable production. To overcome these drawbacks, adaptation of process parameters at runtime is employed. However, the range of parameter values for which a stable process can be maintained is very small, making it necessary to compute suitable parameters beforehand. To this end, and to gain insights into the process itself, the ultrasonic bonding process is modeled. The full model is composed of several partial models, some of which were introduced before. This paper focuses on the modularization of the full model and on the interaction of partial models. All partial models are presented, their interaction is shown and the general outline of the simulation process is given.


A Mechanical Model for the Dynamical Contact of Elastic Rough Bodies with Viscoelastic Properties

F. Schulte, J. Neuhaus, W. Sextro, in: Proceedings of ICoEV 2015 International Conference on Engineering Vibration, 2015, pp. 1109-1117

The contact between viscoelastic materials e.g. elastomers and a rough surface leads to a special friction characteristic, which differs greatly in its properties comparing to other materials like metals. In practice, this friction combination occurs for example in the tire-road contact, or in the use of rubber gaskets. Due to the frictional forces a system is significantly influenced in its vibrational properties. The friction force is composed of two main components adhesion and hysteresis. The adhesion results from molecular bounds between the contact partners, while the deformation of the viscoelastic material by the roughness of the counter body leads to power loss. This internal friction results in an additional frictional force, which is described by the hysteresis. To simulate the frictional behaviour of elastomers on rough surfaces and thus to determine the energy dissipation in contact, it is necessary to develop a mechanical model which considers the roughness of the contact partners, as well as dynamic effects and the dependence on normal pressure and sliding speed. The viscoelastic material behaviour must also be considered. The contact between two rough surfaces is modelled as a rough rigid layer contacting a rough elas- tic layer. The elastic layer is modelled by point masses connected by Maxwell-elements. This allows the viscoelastic properties of the elastomer to be considered. The behaviour of whole system can be described by equations of motion with integrated constraints. The degrees of freedom of the model depends on the varying contact conditions. A point mass not in contact has two degrees of freedom. A point mass in contact moving along the roughness path can be described by only one degree of freedom. For each Maxwell-Element also an inner coordinate and thus a further degree of freedom is needed. Because of varying contact conditions dur- ing the simulation, the simulation interrupts in case the contact conditions change. Then the equations of motions are adapted with respect to the contact constraints. As a result of the simulation one obtain the energy dissipation and thus the friction char- acteristic during the friction process. It is possible to use these results in three dimensional point-contact elements in order to model contact surfaces on lager length scales.


Integrierte Modellierung der Dynamik und der Verlässlichkeit komplexer mechatronischer Systeme

T. Kaul, T. Meyer, W. Sextro, in: 10. Paderborner Workshop Entwurf mechatronischer Systeme, Heinz Nixdorf Institut, Universität Paderborn, 2015, pp. 101-112

Die starke Integration von Sensorik, Aktorik, Hard- und Software stellt Herausforderungen an die Verlässlichkeit intelligenter mechatronischer Systeme dar. Diese Systeme verfügen aber auch über großes Potential zur Verbesserung ihrer Verlässlichkeit durch eine Anpassung des Systemverhaltens an den aktuellen Zustand. Um den Umfang der Systemmodelle zu reduzieren und die Anpassung des Systemverhaltens zu ermöglichen, sind fortschrittliche Modellierungsmethoden notwendig, mit denen die Verlässlichkeit in frühen Phasen des Entwicklungsprozesses sichergestellt und evaluiert werden kann. Von den Attributen der Verlässlichkeit ist insbesondere die Zuverlässigkeit in hohem Maße von den auftretenden Belastungen an den Komponenten und damit vom dynamischen Systemverhalten abhängig. Bisherige Modellierungsansätze bilden diese Abhängigkeit nur unzureichend ab. Es wird daher ein Ansatz zur integrierten Modellierung mechatronischer Systeme vorgestellt. Dieser ist in der Lage, sowohl die Dynamik als auch die Zuverlässigkeit des Systems abzubilden. Die Transformation eines Modells des dynamischen Systemverhaltens generiert dabei ein Zuverlässigkeitsmodell. Für typischerweise konkurrierende Ziele können mit Hilfe von Mehrzieloptimierungsverfahren Betriebspunkte eines Systems bestimmt werden. Das integrierte Modell kann zur Erzeugung von Zielfunktionen für die Dynamik als auch für die Zuverlässigkeit genutzt werden. Die Ergebnisse ermöglichen eine Verhaltensanpassung durch Wahl eines paretooptimalen Betriebspunkts während des Betriebs. Das vorgeschlagene Konzept zur integrierten Modellierung mechatronischer Systeme bietet aufgrund des modellbasierten Entwicklungsansatzes und der automatisierten Transformation eines Verlässlichkeitsmodells eine Reduktion der Benutzereingaben und eine Entlastung des Benutzers. Dadurch wird die Wahrscheinlichkeit von Benutzerfehlern gesenkt und die Verlässlichkeit bereits während der Entwicklung erhöht. Somit können Iterationsschleifen vermieden und die Entwicklungskosten gesenkt werden.


Integrated Model for Dynamics and Reliability of Intelligent Mechatronic Systems

T. Kaul, T. Meyer, W. Sextro, in: European Safety and Reliability Conference (ESREL2015), Taylor and Francis, 2015

Intelligent mechatronic systems are able to autonomously adapt system behavior to current environmental conditions and to system states. To allow for such reactions, complex sensor and actuator systems as well as sophisticated information processing are required, making these systems increasingly complex. However, with the risk of increased system complexity also comes the chance to adapt system behavior based on current reliability and in turn to increase reliability. The adaptation is based on switching selecting an appropriate working point at runtime. Multiple suitable working points can be found using multi-objective optimization techniques, which require an accurate system model including system reliability. At present, modeling of system reliability is a laborious manual task performed by reliability modelling experts. Despite actual system reliability being highly dependent on system dynamics, pre-existing system dynamics models and the resulting reliability model are at best loosely coupled. To allow for closer interaction among dynamics and reliability model and to ensure these are always synchronized, advanced modeling techniques are required. Therefore, an integrated model is introduced that reduces user input to a minimum and that integrates system dynamics and system reliability.


Comparison and ensemble of temperature-based and vibration-based methods for machinery prognostics

J.K. Kimotho, W. Sextro, in: Annual Conference of the Prognostics and Health Management Society 2015, 2015

This paper presents a comparison of a number of prognostic methods with regard to algorithm complexity and performance based on prognostic metrics. This information serves as a guide for selection and design of prognostic systems for real-time condition monitoring of technical systems. The methods are evaluated on ability to estimate the remaining useful life of rolling element bearing. Run-to failure vibration and temperature data is used in the analysis. The sampled prognostic methods include wear-temperature correlation method, health state estimation using temperature measurement, a multi-model particle filter approach with model parameter adaptation utilizing temperature measurements, prognostics through health state estimation and mapping extracted features to the remaining useful life through regression approach. Although the performance of the methods utilizing the vibration measurements is much better than the methods using temperature measurements, the methods using temperature measurements are quite promising in terms of reducing the overall cost of the condition monitoring system as well as the computational time. An ensemble of the presented methods through weighted average is also introduced. The results show that the methods are able to estimate the remaining useful life within error bounds of +-15\%, which can be further reduced to +-5\% with the ensemble approach.


Modeling of the Stick-Slip Effect in Heavy Copper Wire Bonding to Determine and Reduce Tool Wear

A. Unger, W. Sextro, T. Meyer, P. Eichwald, S. Althoff, F. Eacock, M. Brökelmann, in: 2015 17th Electronics Packaging Technology Conference, 2015

To increase quality and reliability of copper wire bonds, self-optimization is a promising technique. For the implementation of self-optimization for ultrasonic heavy copper wire bonding machines, a model of stick-slip motion between tool and wire and between wire and substrate during the bonding process is essential. Investigations confirm that both of these contacts do indeed show stick-slip movement in each period oscillation. In a first step, this paper shows the importance of modeling the stick-slip effect by determining, monitoring and analyzing amplitudes and phase angles of tool tip, wire and substrate experimentally during bonding via laser measurements. In a second step, the paper presents a dynamic model which has been parameterized using an iterative numerical parameter identification method. This model includes Archard's wear approach in order to compute the lost volume of tool tip due to wear over the entire process time. A validation of the model by comparing measured and calculated amplitudes of tool tip and wire reveals high model quality. Then it is then possible to calculate the lifetime of the tool for different process parameters, i.e. values of normal force and ultrasonic voltage.


Improving the cleaning process in copper wire bonding by adapting bonding parameters

S. Althoff, A. Unger, W. Sextro, F. Eacock, in: 2015 17th Electronics Packaging Technology Conference, 2015, pp. 1-6

Changing manufacturing technologies or material in well-known processes has to be followed by an adaption of process parameters. In case of the transition from aluminum wire to copper wire in heavy wire bonding, the adaption effort is high due to the strongly different mechanical properties of the wire. One of these adaption aspects, apart from wire material, is the existent oxide layers on wire and substrate. The ductile aluminum oxide is not influencing the bonding process much, because it is supposed to break apart in case of plastic deformation. The lubricating copper oxide layer has to be removed before micro welds can develop. Therefore, in this paper, experiments are carried out at low frequency to determine the friction energy needed to abrade the copper oxide layer of wire and substrate, which is indicated by an increase in the resulting friction coefficient. The friction energy per contact area to remove the interfering layers at low frequency is compared to the real bonding process working at 58 kHz. In addition, a theoretical concept is being described to get a grasp of the occurring mechanism. In the end a proposal is given how to set bonding parameters to get the cleanest surfaces with the installed bond tool.


Anforderungen an Condition-Monitoring-Verfahren zur Nutzung im zuverläsigkeitsgeregelten Betrieb adaptiver Systeme

T. Meyer, J.K. Kimotho, W. Sextro, in: 27. Tagung Technische Zuverlässigkeit (TTZ 2015) - Entwicklung und Betrieb zuverlässiger Produkte, 2015, pp. 111-122

Intelligente technische Systeme, die in der Lage sind, sich an geänderte Umgebungsbedingungen anzupassen, ermöglichen eine Adaption anhand der aktuell erreichten Zuverlässigkeit. Zu diesem Zwecke kann ein geschlossener Regelkreis formuliert werden, der dazu geeignet ist, den Betriebspunkt des Systems während der gesamten Lebensdauer anzupassen. Dadurch wird eine harte Umschaltung während des Betriebs vermieden und die Verhaltensanpassung ist vom Nutzer weitgehend unbemerkt möglich. Dazu wird die aktuelle Restlebensdauer mit einer vorgegebenen Restlebensdauer verglichen. Durch Änderung der vorgegebenen Restlebensdauer lässt sich auch eine Anpassung der gewünschten Nutzungsdauer erreichen, beispielsweise um veränderte Wartungsintervalle einzuhalten. Zu diesem Zwecke ist es allerdings notwendig, die aktuell erreichte Zuverlässigkeit zu schätzen. Für die Regelung ist dabei die aktuelle Restlebensdauer der wichtigste Parameter, da er als Istwert direkt mit der gewünschten Restlebensdauer als Sollwert verglichen wird und als Reglereingang dient. Für die Genauigkeit der Regelung ist daher die Bestimmung der Restlebensdauer von entscheidender Bedeutung. Es wird ein Modell des Regelkreises vorgestellt, das auch den Einfluss einer fehlerhaften Restlebensdauerschätzung auf die Verhaltensanpassung abbildet. Dadurch ist es möglich, Grenzen der Verhaltensanpassung und die zur Einhaltung notwendige Genauigkeit der Restlebensdauerschätzung zu bestimmen. Es gibt zahlreiche Ansätze, die Restlebensdauer zu schätzen, die aufgeteilt werden in modellbasierte Verfahren und datengetriebene Verfahren. Die individuelle Eignung eines jeden Verfahrens sowie die Modellbildung oder die Nutzung geeigneter Algorithmen ist stark systemabhängig. Um die Auswahl von Verfahren und Modellen oder Algorithmen zu ermöglichen, werden zunächst die Anforderungen an die Restlebensdauerschätzung zur Nutzung als Regelungs-Istwert bestimmt. Verschiedene Verfahren werden sodann hinsichtlich ihrer Eignung evaluiert und Anwendungsgrenzen aufgezeigt.


2014

Introduction to Self-optimization and Dependability

A. Trächtler, C. Hölscher, C. Rasche, C. Priesterjahn, D. Zimmer, J. Henning Keßler, K. Stahl, K. Flaßkamp, M. Vaßholz, M. Krüger, M. Dellnitz, P. Iwanek, P. Reinold, P. Hartmann, T. Meyer, W. Sextro, in: Dependability of Self-Optimizing Mechatronic Systems, Springer Berlin Heidelberg, 2014, pp. 1-24

DOI


PEM fuel cell prognostics using particle filter with model parameter adaptation

J.K.. Kimotho, T. Meyer, W. Sextro, in: Prognostics and Health Management (PHM), 2014 IEEE Conference on, 2014, pp. 1-6

Application of prognostics and health management (PHM) in the field of Proton Exchange Membrane (PEM) fuel cells is emerging as an important tool in increasing the reliability and availability of these systems. Though a lot of work is currently being conducted to develop PHM systems for fuel cells, various challenges have been encountered including the self-healing effect after characterization as well as accelerated degradation due to dynamic loading, all which make RUL predictions a difficult task. In this study, a prognostic approach based on adaptive particle filter algorithm is proposed. The novelty of the proposed method lies in the introduction of a self-healing factor after each characterization and the adaption of the degradation model parameters to fit to the changing degradation trend. An ensemble of five different state models based on weighted mean is then developed. The results show that the method is effective in estimating the remaining useful life of PEM fuel cells, with majority of the predictions falling within 5\% error. The method was employed in the IEEE 2014 PHM Data Challenge and led to our team emerging the winner of the RUL category of the challenge.


Optimal Parameter Tuning for Multiclass Support Vector Machines in Machinery Health State Estimation

J.K. Kimotho, W. Sextro, PAMM (2014), 14(1), pp. 815-816

The increasing demand for high reliability, safety and availability of technical systems calls for innovative maintenance strategies. The use of prognostic health management (PHM) approach where maintenance action is taken based on current and future health state of a component or system is rapidly gaining popularity in the maintenance industry. Multiclass support vector machines (MC-SVM) has been identified as a promising algorithm in PHM applications due to its high classification accuracy. However, it requires parameter tuning for each application, with the objective of minimizing the classification error. This is a single objective optimization problem which requires the use of optimization algorithms that are capable of exhaustively searching for the global optimum parameters. This work proposes the use of hybrid differential evolution (DE) and particle swarm optimization (PSO) in optimally tuning the MC-SVM parameters. DE identifies the search limit of the parameters while PSO finds the global optimum within the search limit. The feasibility of the approach is verified using bearing run-to-failure data and the results show that the proposed method significantly increases health state classification accuracy.


Reliability analysis of ultrasonic power transducers

T. Hemsel, P. Bornmann, T. Morita, C. Sondermann-Wölke, W. Sextro, Archive of Applied Mechanics (2014), pp. 1-7

DOI


Case Study

A. Trächtler, B. Kleinjohann, C. Heinzemann, C. Rasche, C. Priesterjahn, D. Steenken, H. Wehrheim, J. Gausemeier, K. Flaßkamp, L. Kleinjohann, M. Krüger, P. Iwanek, P. Hartmann, R. Dorociak, S. Groesbrink, S. Ziegert, T. Meyer, W. Sextro, W. Schäfer, in: Dependability of Self-Optimizing Mechatronic Systems, Springer Berlin Heidelberg, 2014, pp. 173-188

DOI


Tire footprint analysis depending on the elastokinematics of a multi-link suspension system using multi-body dynamics simulation

S. Kohl, W. Sextro, A. Zuber, PAMM (2014), 14(1), pp. 65-66

An automotive suspension system represents one of the most complex and important systems in a passenger vehicle, which has to ensure a robust and optimized contact between the wheels and the road at any time. For improving a suspension system it is important to take an investigative look at the interaction between suspension, tire and road dynamics. Thus a part of a study into aspects of suspension modeling on multi-body simulations of rear multi-link suspension system dynamics with focus on the tire footprint area is presented in this work.


Improving the bond quality of copper wire bonds using a friction model approach

S. Althoff, J. Neuhaus, T. Hemsel, W. Sextro, in: Electronic Components and Technology Conference (ECTC), 2014 IEEE 64th, 2014, pp. 1549-1555

In order to increase mechanical strength, heat dissipation and ampacity and to decrease failure through fatigue fracture, wedge copper wire bonding is being introduced as a standard interconnection method for mass production. To achieve the same process stability when using copper wire instead of aluminum wire a profound understanding of the bonding process is needed. Due to the higher hardness of copper compared to aluminum wire it is more difficult to approach the surfaces of wire and substrate to a level where van der Waals forces are able to arise between atoms. Also, enough friction energy referred to the total contact area has to be generated to activate the surfaces. Therefore, a friction model is used to simulate the joining process. This model calculates the resulting energy of partial areas in the contact surface and provides information about the adhesion process of each area. The focus here is on the arising of micro joints in the contact area depending on the location in the contact and time. To validate the model, different touchdown forces are used to vary the initial contact areas of wire and substrate. Additionally, a piezoelectric tri-axial force sensor is built up to identify the known phases of pre-deforming, cleaning, adhering and diffusing for the real bonding process to map with the model. Test substrates as DBC and copper plate are used to show the different formations of a wedge bond connection due to hardness and reaction propensity. The experiments were done by using 500 $\mu$m copper wire and a standard V-groove tool.


Thermo-Mechanical Model for Wheel Rail Contact using Coupled Point Contact Elements

J. Neuhaus, W. Sextro, in: Proceedings of the 5th International Conference on Computational Methods, ScienTech Publisher, 2014

A model to calculate the locally resolved tangential contact forces of the wheel rail contact with respect to contact kinematics, material and surface properties as well as temperature is introduced. The elasticity of wheel and rail is modeled as an elastic layer consisting of point contact elements connected by springs to each other and to the wheel. Each element has two degrees of freedom in tangential directions. The resulting total stiffness matrix is reduced to calculate only the position of the elements in contact. Friction forces as well as contact stiffnesses are incorporated by a nonlinear force-displacement characteristic, which originates from a detailed contact model. The contact elements are transported through the contact zone in discrete time steps. After each time step an equilibrium is calculated. For all elements, their temperature and its influence on local friction are regarded by calculating friction power and temperature each time step.


Analysis Method of Tool Topography Change and Identification of Wear Indicators for Heavy Copper Wire Wedge Bonding

P. Eichwald, W. Sextro, S. Althof, F. Eacock, A. Unger, T. Meyer, K. Guth, in: Proceedings of the 47th International Symposium on Microelectronics, 2014, pp. 856-861

Wire bonding is the most common technology for connecting electronic components. Due to their efficiency bond interconnections made of copper wire are used for example in the aerospace and medical technology as well as in the fields of renewable energies. One of the main cost factors in the manufacturing process is the consumables like bonding tools. The technological transition to copper as wire material causes significant wear on the millimeter large effective contact area of the bonding tool. This wear leads to a loss by a factor of 30 of the number of reliable interconnections which can be produced by a single tool. To reduce setting-up time in the production and minimizing costs, an enlarged bonding tool lifetime is desirable. Consequently a better understanding of wear and recognition of wear pattern is required. Therefore, the paper presents an analyzing method of the tool topography change of a heavy wire bonding tool by using a confocal microscope. Furthermore, the paper discusses the identification of the main wear indicators by the help of the named topography change for different bond parameters, like ultrasonic power and tool geometry. Reference topography has been carried out by choosing typical parameters of the production line. To judge whether the quality requirement of the bond connections made by a single tool cannot be fulfilled shear test of the source bond have been carried out after a defined number of produced bond connections. Main steps of analysis: (I)Topography of the tool surface is sampled after a defined number of bonds by means of a confocal microscope to detect the wear progress.(II)The recorded data is filtered using Matlab. So, measurement errors can be eliminated and the topography can be overlaid more easy to identify differences between diverse tools or differences in wear stages of the same tool.(III)The subsequent discretization of the topography into sub volumes allows to (IV)describe the loss of volume depending on the position in the groove. Thereby, intermediate status of wear of one tool can be used to obtain a persistent description of the topography change over the number of produced bonds by interpolating the confocal data. Afterwards the persistent change of the groove flank has been analyzed for the named test series to identify the main wear indicators and their effect on shear forces. All worn tools show dominant areas for volume loss especially for plastic deformation and accordingly abrasion. These wear mechanism can be referred to the change of main parts of the groove geometry like the rounding of the front and back radius. The most volume loss was identified in the upper part of the tool flanks or rather at the transition from the groove flank to the front or back radius. Furthermore the observation of the center of the groove flank shows just a little change in volume. All in all, the identification of the wear indicators will be discussed with the objective of increasing the tool lifetime by optimizing the tool geometry without losses in bond quality and reliability.


Self-Sensing Ultrasound Transducer for Cavitation Detection

P. Bornmann, T. Hemsel, W. Sextro, G. Memoli, M. Hodnett, B. Zeqiri, in: 2014 IEEE International Ultrasonics Symposium Proceedings, 2014, pp. 663-666

Cavitation monitoring is desired to optimize the sonication for diverse sonochemical processes and to detect changes or malfunctions during operation. In situ cavitation measurements can be carried out by detection of the acoustic emissions of cavitation bubbles by sensors in the liquid. However, in harsh environments sensors might not be applicable. Thus, the impact of cavitation on the electrical signals of a piezoelectric transducer has been analyzed as alternative method to measure the threshold, strength and type of cavitation. The applicability has been tested in three different setups to evaluate the general- izability of extracted indicators. In all setups indicators for the cavitation thresholds could be derived from the current signal. In two setups features showed two thresholds that may be linked to the types of cavitation. However, only one feature derived from the current signal in one particular setup correlated to the strength of cavitation. Cavitation detection based on the current signal of the transducer is a useful method to detect cavitation in harsh environments and without perturbing the sound field. Once appli- cable indicators have been identified, they may easily be tracked during the process. However, for more detailed studies about the cavitation activity and its spatial distribution, measurements with in situ sensors are recommended.


High-velocity operation of piezoelectric inertia motors: experimental validation

M. Hunstig, T. Hemsel, W. Sextro, Archive of Applied Mechanics (2014), pp. 1-9

Piezoelectric inertia motors use the inertia of a body to drive it by means of a friction contact in a series of small steps. It has been shown previously in theoretical investigations that higher velocities and smoother movements can be obtained if these steps do not contain phases of stiction (''stick-slip`` operation), but use sliding friction only (''slip-slip`` operation). One very promising driving option for such motors is the superposition of multiple sinusoidal signals or harmonics. In this contribution, the theoretical results are validated experimentally. In this context, a quick and reliable identification process for parameters describing the friction contact is proposed. Additionally, the force generation potential of inertia motors is investigated theoretically and experimentally. The experimental results confirm the theoretical result that for a given maximum frequency, a signal with a high fundamental frequency and consisting of two superposed sine waves leads to the highest velocity and the smoothest motion, while the maximum motor force is obtained with signals containing more harmonics. These results are of fundamental importance for the further development of high-velocity piezoelectric inertia motors.


Conclusion and Outlook

T. Meyer, C. Priesterjahn, W. Sextro, in: Dependability of Self-Optimizing Mechatronic Systems, Springer Berlin Heidelberg, 2014, pp. 189-190

DOI


Contact Modeling in Multibody Systems with Elastic Bodies in High-Frequency Applications

S. Schulze, W. Sextro, F. Grüter, PAMM (2014), 14(1), pp. 39-40

This paper discusses the refinement of multibody models by integration of flexible bodies and by considering nonlinearities from contacts. It presents common approaches for contact modeling in multibody simulations and strategies to include flexible bodies. A contact model is implemented in the elastic multibody model. Experimental results show that significant effects of system dynamics can be modeled by use of a multibody model including elastic bodies and contacts.


Time-efficient analysis of nonlinear dynamic behavior.

C. Sprock, W. Sextro, in: Proceedings in Applied Mathematics and Mechanics 14 (2014), Nr. 1,, 2014, pp. 293-294

Many nonlinear mechanical oscillators show excitation-dependent behavior. In this paper, a new measurement approach is presented to analyze such structures. The main advantage of the presented method is the high efficiency, since measurement duration and loads to the structure are significantly reduced.


Experimental and Numerical Simulation Study of Pre-Deformed Heavy Copper Wire Wedge Bonds

A. Unger, W. Sextro, S. Althoff, P. Eichwald, T. Meyer, F. Eacock, M. Brökelmann, in: Proceedings of the 47th International Symposium on Microelectronics (IMAPS), 2014, pp. 289-294

Power semiconductor modules are used to control and switch high electrical currents and voltages. Within the power module package wire bonding is used as an interconnection technology. In recent years, aluminum wire has been used preferably, but an ever-growing market of powerful and efficient power modules requires a material with better mechanical and electrical properties. For this reason, a technology change from aluminum to copper is indispensable. However, the copper wire bonding process reacts more sensitive to parameter changes. This makes manufacturing reliable copper bond connections a challenging task. The aim of the BMBF funded project Itsowl-InCuB is the development of self-optimizing techniques to enable the reliable production of copper bond connections under varying conditions. A model of the process is essential to achieve this aim. This model needs to include the dynamic elasto-plastic deformation, the ultrasonic softening effect and the proceeding adhesion between wire and substrate. This paper focusses on the pre-deformation process. In the touchdown phase, the wire is pressed into the V-groove of the tool and a small initial contact area between wire and substrate arise. The local characteristics of the material change abruptly because of the cold forming. Consequently, the pre-deformation has a strong effect on the joining process. In [1], a pre-cleaning effect during the touchdown process of aluminum wires by cracking of oxide layers was presented. These interactions of the process parameters are still largely unknown for copper. In a first step, this paper validates the importance of modeling the pre-deformation by showing its impact on the wire deformation characteristic experimentally. Creating cross-section views of pre-deformed copper wires has shown a low deformation degree compared to aluminum. By using a digital microscope and a scanning confocal microscope an analysis about the contact areas and penetration depths after touchdown has been made. Additionally, it has to be taken into account that the dynamical touchdown force depends on the touchdown speed and the touchdown force set in the bonding machine. In order to measure the overshoot in the force signals, a strain gauge sensor has been used. Subsequently, the affecting factors have been interpreted independently Furthermore, the material properties of copper wire have been investigated with tensile tests and hardness measurements. In a second step, the paper presents finite element models of the touchdown process for source and destination bonds. These models take the measured overshoot in the touchdown forces into account. A multi-linear, isotropic material model has been selected to map the material properties of the copper. A validation of the model with the experimental determined contact areas, normal pressures and penetration depths reveals the high model quality. Thus, the simulation is able to calculate and visualize the three dimensional pre-deformation with an integrated material parameter of the wire if the touchdown parameters of the bonding machine are known. Based on the calculated deformation degrees of wire and substrate, it is probably possible to investigate the effect of the pre-deformation on the pre-cleaning phase in the copper wire bonding.


Time-efficient dynamic analysis of structures exhibiting nonlinear peak bending

C. Sprock, W. Sextro, in: Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2014 IEEE International, 2014, pp. 320-324

A measurement method is presented that combines the advantages of the multisine measurement technique with a prediction method for peak bending behavior. This combination allows the analysis of the dynamic behavior of mechanical structures at distinctly reduced measurement durations and has the advantage of reducing high excitation impacts on the structure under test.


Time-efficient analysis of nonlinear peak bending behavior.

C. Sprock, W. Sextro, in: Proceedings of ISMA - International Conference of Noise and Vibration. 2014, 2014, pp. 1-8

A measurement method is presented that combines the advantages of the multisine measurement technique with a prediction method for peak bending behavior. This combination allows the analysis of the dynamic behavior of mechanical structures at distinctly reduced measurement durations and has the advantage of reducing high excitation impacts on the structure under test. After a brief presentation of the algorithm, the validity scope of the approach is investigated with emphasis on an exemplary error investigation.


Data-driven Modeling of the Ultrasonic Softening Effect for Robust Copper Wire Bonding

A. Unger, W. Sextro, S. Althoff, T. Meyer, M. Brökelmann, in: Proceedings of 8th International Conference on Integrated Power Electronic Systems, 2014, pp. 175-180

In power electronics, ultrasonic wire bonding is used to connect the electrical terminals of power modules. To implement a self-optimization technique for ultrasonic wire bonding machines, a model of the process is essential. This model needs to include the so called ultrasonic softening effect. It is a key effect within the wire bonding process primarily enabling the robust interconnection between the wire and a substrate. However, the physical modeling of the ultrasonic softening effect is notoriously difficult because of its highly non-linear character and the absence of a proper measurement method. In a first step, this paper validates the importance of modeling the ultrasonic softening by showing its impact on the wire deformation characteristic experimentally. In a second step, the paper presents a data-driven model of the ultrasonic softening effect which is constructed from data using machine learning techniques. A typical caveat of data-driven modeling is the need for training data that cover the considered domain of process parameters in order to achieve accurate generalization of the trained model to new process configurations. In practice, however, the space of process parameters can only be sampled sparsely. In this paper, a novel technique is applied which enables the integration of prior knowledge about the process into the datadriven modeling process. It turns out that this approach results in accurate generalization of the data-driven model to unseen process parameters from sparse data.


Dependability of Self-Optimizing Mechatronic Systems

J. Gausemeier, F. Josef Rammig, W. Schäfer, W. Sextro, Springer Berlin Heidelberg, 2014

Intelligent technical systems, which combine mechanical, electrical and software engineering with methods from control engineering and advanced mathematics, go far beyond the state of the art in mechatronics and open up fascinating perspectives. Among these systems are so-called self-optimizing systems, which are able to adapt their behavior autonomously and flexibly to changing operating conditions. The Collaborative Research Center 614 "Self-optimizing concepts and structures in mechanical engineering" pursued the long-term aim to enable others to develop dependable self-optimizing systems. Assuring their dependability poses new challenges. However, self-optimization also offers the possibility to adapt the system's behavior to improve dependability during operation. The aim of this book is to provide methods and techniques to master the challenges and to exploit the possibilities given by self-optimization. The reader will be able to develop self-optimizing systems that fulfill and surpass today’s dependability requirements easily. This book is directed to researchers and practitioners alike. It gives a brief introduction to the holistic development approach for self-optimizing mechatronic systems and the steps required to assure a dependable product design starting with the very early conceptual design phase. A guideline to select suitable methods for each step and the methods themselves are included. Each method is individually introduced, many examples and full references are given.


Method to Identify Dependability Objectives in Multiobjective Optimization Problem

T. Meyer , C. Sondermann-Wölke, W. Sextro, Conference Proceedings of the 2nd International Conference on System-Integrated Intelligence (2014), 15, pp. 46-53

Intelligent mechatronic systems, such as self-optimizing systems, allow an adaptation of the system behavior at runtime based on the current situation. To do so, they generally select among several pre-defined working points. A common method to determine working points for a mechatronic system is to use model-based multiobjective optimization. It allows finding compromises among conflicting objectives, called objective functions, by adapting parameters. To evaluate the system behavior for different parameter sets, a model of the system behavior is included in the objective functions and is evaluated during each function call. Intelligent mechatronic systems also have the ability to adapt their behavior based on their current reliability, thus increasing their availability, or on changed safety requirements; all of which are summed up by the common term dependability. To allow this adaptation, dependability can be considered in multiobjective optimization by including dependability-related objective functions. However, whereas performance-related objective functions are easily found, formulation of dependability-related objective functions is highly system-specific and not intuitive, making it complex and error-prone. Since each mechatronic system is different, individual failure modes have to be taken into account, which need to be found using common methods such as Failure-Modes and Effects Analysis or Fault Tree Analysis. Using component degradation models, which again are specific to the system at hand, the main loading factors can be determined. By including these in the model of the system behavior, the relation between working point and dependability can be formulated as an objective function. In our work, this approach is presented in more detail. It is exemplified using an actively actuated single plate dry clutch system. Results show that this approach is suitable for formulating dependability-related objective functions and that these can be used to extend system lifetime by adapting system behavior.


An approach for feature extraction and selection from non-trending data for machinery prognosis

J.K. Kimotho, W. Sextro, in: Proceedings of the Second European Conference of the Prognostics and Health Management Society 2014, 2014

With the paradigm shift towards prognostic and health management (PHM) of machinery, there is need for reliable PHM methodologies with narrow error bounds to allow maintenance engineers take decisive maintenance actions based on the prognostic results. Prognostics is mainly concerned with the estimation of the remaining useful life (RUL) or time to failure (TTF). The accuracy of PHM methods is usually a function of the features extracted from the raw data obtained from sensors. In cases where the extracted features do not display clear degradation trends, for instance highly loaded bearings, the accuracy of the state of the art PHM methods is significantly affected. The data which lacks clear degradation trend is referred to as non-trending data. This study presents a method for extracting degradation trends from non-trending condition monitoring data for RUL estimation. The raw signals are first filtered using a discrete wavelet transform (DWT) denoising filter to remove noise from the acquired signals. Time domain, frequency domain and time-frequency domain features are then extracted from the filtered signals. An autoregressive model is then applied to the extracted features to identify the degradation trends. Features representing the maximum health information are then selected based on a performance evaluation criteria using extreme learning machine (ELM) algorithm. The selected features can then be used as inputs in a prognostic algorithm. The feasibility of the method is demonstrated using experimental bearing vibration data. The performance of the method is evaluated on the accuracy of RUL estimation and the results show that the method can be used to accurately estimate RUL with a maximum error of 10\%.


Vibration Analysis of Mechanical Structures using Multisine Excitation Techniques

C. Sprock, W. Sextro, in: Proceedings of 31st Danubia-Adria Symposium. 2014, 2014


2013

A friction based approach for modeling wire bonding

S. Althoff, J. Neuhaus, T. Hemsel, W. Sextro, in: IMAPS 2013, 46th International Symposium on Microelectronics, 2013

A model approach for wedge/wedge bonding copper wire is presented. The connection between wire and substrate is based on a variety of physical effects, but the dominant one is the friction based welding while applying ultrasound. Consequently, a friction model was used to investigate the welding process. This model is built up universal and can be used to describe the formation of micro welds in the time variant contact area between wire and substrate. Aim of the model is to identify the interactions between touchdown, bond normal force, ultrasonic power and bonding time. To do so, the contact area is discretized into partial areas where a Point Contact Model is applied. Based on this approach it is possible to simulate micro and macro slip inside the contact area between wire and substrate. The work done by friction force is a main criterion to define occurring micro joints which influence the subsequent welding.


Modelbased Investigations of Gyroscopic Effect on the (Elasto-)Kinematics of Suspension Systems

S. Kohl, A. Zuber, W. Sextro, in: Proc. Appl. Math. Mech., 2013, pp. 23-24

During wheel bumping caused by stochastic road excitation, the wheel performs rotational and translational movements. The bump and rebound wheel velocity leads to significant angular velocities based on the (elasto-)kinematics of the suspension system. Based on the gyroscopic effect, moments arise about the rotating wheel induced by the angular change while bumping. Therefore it leads to undesirable wheel changes and degrades the tire contact and finally decreases the driving stability. A flexible MBS-model of the five-link rear axle system that includes these effects has been built up to allow a detailed investigation of the gyroscopic effect. Using the simulation results, conclusions can be drawn for refining design criteria for the kinematics, elastokinematics and topology of the suspension system to increase the active safety of the vehicle


Stick-slip and slip-slip operation of piezoelectric inertia drives - Part I: Ideal Excitation.

M. Hunstig, T. Hemsel, W. Sextro, Sensors and Actuators A: Physical (2013), 200, pp. 90 - 100

Piezoelectric inertia motors, also known as ``stick--slip drives'', use the inertia of a body to drive it in small steps by means of a friction contact. While these steps are classically assumed to involve stiction and sliding, the motors can also operate in ``slip--slip'' mode without any phase of static friction. This contribution provides a systematic investigation and performance comparison of different stick--slip and slip--slip modes of operation. Different criteria for comparing the motional performance of inertia motors are defined: Steady state velocity, smoothness of motion, and start-up time. Using the example of a translational inertia motor excited by an ideal displacement signal, it is found that the maximum velocity reachable in stick--slip operation is limited principally, while continuous slip--slip operation allows very high velocities. For the investigated driving signals, the motor velocity is proportional to the square root of the actuator stroke. The motor performance with these ideal signals defines an upper boundary for the performance of real motors.


Leistungs- und Bandbreitensteigerung von Energy-Harvesting-Generatoren für Energieautarke Systeme

M. Hunstig, W. Al-Ashtari, T. Hemsel, W. Sextro, in: 9. Paderborner Workshop Entwurf mechatronischer Systeme, Heinz Nixdorf Institut, Universität Paderborn, 2013, pp. 359-372


Influences of Bonding Parameters on the Tool Wear for Copper Wire Bonding

P. Eichwald, W. Sextro, S. Althoff, F. Eacock, M. Schnietz, K. Guth, M. Brökelmann, in: 15th Electronics Packaging Technology Conference, 2013

Ultrasonic wire bonding is a common technology for manufacturing electrical interconnects. In the field of power electronics, new thermal and electrical obligations arose due to increasing power density requirements. One approach to achieve these aims is replacing the wire material for heavy wire bonds from aluminum to copper. This material change leads to challenging tasks and problems, for instance the occurring wear of the bond tool. The wear is significantly higher using copper wire instead of aluminum and results in a dramatic loss in the amount of interconnects which can be produced reliable by a single tool. To reduce setting-up time in the production and minimizing costs, an enlarged bonding tool lifetime is desirable. Therefore, the paper discusses the influences of bonding parameters on the wear. The key question is which of the tasks cannot be fulfilled with increased wear of the tool, e.g. loss of process capability. The main functions are fixing the wire in the tool groove, predeformation, applying normal force and transmission of ultrasonic oscillation to the wire. To identify the most affecting factors, four bonding parameters are varied and their influences are investigated. These parameters are: (I) ultrasonic power, (II) tool geometry, (III) the way of tangential force transmission and (IV) loop trajectory.


Increasing the power of piezoelectric energy harvesters by magnetic stiffening

W. Al-Ashtari, M. Hunstig, T. Hemsel, W. Sextro, Journal of Intelligent Material Systems and Structures (2013), 24(11), pp. 1332-1342

A piezoelectric cantilever beam with a tip mass at its free end is a common energy harvester configuration. This article introduces a new principle of designing such a harvester that increases the generated power without changing the resonance frequency of the harvester: the attraction force between two permanent magnets is used to add stiffness to the system. This magnetic stiffening counters the effect of the tip mass on the efficient operation frequency. Five set-ups incorporating piezoelectric bimorph cantilevers of the same type in different mechanical configurations are compared theoretically and experimentally to investigate the feasibility of this principle: theoretical and experimental results show that magnetically stiffened harvesters have important advantages over conventional set-ups with and without tip mass. They generate more power while only slightly increasing the deflection in the piezoelectric harvester and they can be tuned across a wide range of excitation frequencies.


Machinery Prognostic Method Based on Multi-Class Support Vector Machines and Hybrid Differential Evolution -- Particle Swarm Optimization

J.K. Kimotho, C. Sondermann-Wölke, T. Meyer, W. Sextro, Chemical Engineering Transactions (2013), 33, pp. 619-624

Recently, focus on maintenance strategies has been shifted towards prognostic health management (PHM) and a number of state of the art algorithms based on data-driven prognostics have been developed to predict the health states of degrading components based on sensory data. Amongst these algorithms, Multiclass Support Vector Machines (MC-SVM) has gained popularity due to its relatively high classification accuracy, ability to classify multiple patterns and capability to handle noisy /incomplete data. However, its application is limited by the difficulty in determining the required kernel function and penalty parameters. To address this problem, this paper proposes a hybrid differential evolution -- particle swarm optimization (DE-PSO) algorithm to optimize the MC-SVM kernel function and penalty parameters. The differential algorithm (DE) obtains the search limit for the SVM parameters, while the particle swarm optimization algorithm (PSO) determines the global optimum parameters for a given training data set. Since degrading machinery components display several degradation stages in their lifetime, the MC-SVM trained with optimum parameters are used to estimate the health states of a degrading machinery component, from which the remaining useful life (RUL) is predicted. This method improves the classification accuracy of MC-SVM in predicting the health states of a machinery component and consequently increases the accuracy of RUL predictions. The feasibility of the method is validated using bearing prognostic run-to-failure data obtained from NASA public data repository. A comparative study between MC-SVM with parameters obtained using simple grid search with n-fold cross validation and MCSVM with DE-PSO based on prognostic performance metrics reveals that the proposed method has better performance, with all the cases considered falling within a 10 \% error margin. The method also outperforms other soft computing methods proposed in literature.


High-Velocity Slip-Slip Operation of Piezoelectric Inertia Motors - Experimental Validation

M. Hunstig, T. Hemsel, W. Sextro, in: Proceedings of 10th International Workshop on Piezoelectric Materials and Applications and 8th Energy Harvesting Workshop, 2013, pp. 16-18

It has been shown previously that ``slip-slip'' operation of piezoelectric inertia motors allows higher velocities and smoother movements than classic ``stick-slip'' operation. One very promising driving option is to use a superposition of multiple sinusoidal signals. In this contribution, previous theoretical results are validated experimentally. The results confirm the theoretical result that for a given maximum frequency, usually defined by the actuator characteristics, a signal with high fundamental frequency and consisting of two superposed sine waves leads to the highest velocity and the smoothest motion. This result is of fundamental importance for the further development of high-velocity piezoelectric inertia motors.


Schwingungen

K. Magnus, K. Popp, W. Sextro, Springer Verlag, 2013

Schwingungsprobleme in der Technik analysieren, verstehen und beschreiben Schwingungen treten als nützliche oder auch als störende Erscheinungen fast überall in Natur und Technik auf. Deshalb ist es wichtig, sie zu verstehen, zu deuten oder auch in gewünschter Weise zu beeinflussen. Dieses Lehrbuch gibt eine Einführung in die physikalischen Grundlagen und die mathematische Behandlung von Schwingungen. In der aktuellen Auflage wurden der Text und die Bilder überarbeitet sowie konstruktive Hinweise von Fachkollegen berücksichtigt. Der Inhalt Grundbegriffe und Darstellungsmittel - Freie Schwingungen - Selbsterregte Schwingungen - Parametererregte Schwingungen - Erzwungene Schwingungen - Koppelschwingungen - Kontinuumsschwingungen - Chaotische Bewegungen - Aufgaben und Ergebnisse Die Zielgruppe Studierende der Ingenieurwissenschaften, der Physik und der Mathematik, berufstätige Ingenieure


Enhanced energy harvesting using multiple piezoelectric elements: Theory and experiments

W. Al-Ashtari, M. Hunstig, T. Hemsel, W. Sextro, Sensors and Actuators A: Physical (2013), 200, pp. 138 - 146

Power and bandwidth of piezoelectric harvesters can be increased by using multiple piezoelectric elements in one harvester. In this contribution, a novel energy harvesting cantilever array with magnetic tuning including three piezoelectric bimorphs is investigated theoretically and experimentally, with a good agreement between model and experiment. Other than harvester designs proposed before, this array is easy to manufacture and insensitive to manufacturing tolerances because its optimum operation frequency can be re-adjusted after fabrication. Using the superposition principle, the Butterworth-Van Dyke model and a mechanical lumped parameters model, the generated voltage and current are determined analytically. Formulas for calculating the power generated by array harvesters with an arbitrary number of piezoelectric elements connected in series or in parallel are derived. It is shown that optimum harvester design must take both the connected load and the operating frequency into account. Strategies for connecting multiple bimorphs to increase the maximum generated power and/or enhance the bandwidth compared to a single bimorph harvester are investigated. For bandwidth enhancement it is essential that individual rectifiers are used for the bimorphs. An example with three bimorphs shows that, depending on the chosen tuning strategy, the power is increased by about 340\% or the bandwidth is increased by about 500\%, compared to one single bimorph.


Modelling the friction contact in an inertia motor

M. Hunstig, T. Hemsel, W. Sextro, Journal of Intelligent Material Systems and Structures (2013), 24(11), pp. 1380-1391

Piezoelectric inertia motors, also known as stickslip drives or (smooth) impact drives, use the inertia of a body to drive it by a friction contact in small steps, in the majority of motors composed of a stick phase and a slip phase between the friction partners. For optimizing inertia motors, it is important to understand the friction contact correctly and to measure its properties appropriately. This contribution presents experimental set-ups for measuring the contact force, friction force and relative displacement in an actual inertia motor with a dry friction contact and numerical simulations of the motor operation. The motor uses a pre-stressed multilayer actuator with a displacement in the range of 20 $\mu$ m. It is shown that a previously postulated condition for the applicability of simple kinetic friction models is well fulfilled for the investigated motor. The friction contact in the motor is simulated using different kinetic friction models. The input for the friction models is the measured motion of the rod. The models qualitatively reproduce the measured motion but show quantitative deviations varying with frequency. These can be explained by vibrations of the driving rod that are experimentally investigated.


Multiobjective Optimization including Safety of Operation Applied to a Linear Drive System

T. Meyer, C. Hölscher, M. Menke, W. Sextro, D. Zimmer, in: Proc. Appl. Math. Mech., 2013, pp. 483-484

In this contribution, we introduce a multiobjective optimization used to calculate safe optimal working points for a mechatronic system by including stochastic safety-critical signals in an objective function. Our application example consists of a linear drive for a rail-bound vehicle and an actuation unit. The linear drive's secondary part is fixed; the primary part is vehicle-mounted and can be adjusted vertically to account for deviations of the height of the secondary part. A small air gap between both parts improves efficiency, but increases the risk of a collision between the two parts. Using height data of the secondary part, a trajectory for the vertical adjustment of the primary part is calculated. However, unexpected deviations necessitate a readjustment of the air gap. The probability of such unexpected height deviations can be calculated from the readjustment data. The system is equipped with sensors to measure the air gap. Assuming that the sensor noise is normally distributed, noise characteristics are determined. Using this information and the probability distribution of unexpected height deviations, the probability of a collision is determined.T he sensor noise and the probability of a collision between both parts of the linear drive are included in the dynamical model of the system. Using multiobjective optimization, pareto-optimal working points for the controller of the air gap are obtained. By selecting an appropriate working point, safe operation can be ensured.


Application of Event Based Decision Tree and Ensemble of Data Driven Methods for Maintenance Action Recommendation

J.K. Kimotho, C. Sondermann-Wölke, T. Meyer, W. Sextro, International Journal of Prognostics and Health Management (2013), 4(2)

This study presents the methods employed by a team from the department of Mechatronics and Dynamics at the University of Paderborn, Germany for the 2013 PHM data challenge. The focus of the challenge was on maintenance action recommendation for an industrial machinery based on remote monitoring and diagnosis. Since an ensemble of data driven methods has been considered as the state of the art approach in diagnosis and prognosis, the first approach was to evaluate the performance of an ensemble of data driven methods using the parametric data as input and problems (recommended maintenance action) as the output. Due to close correlation of parametric data of different problems, this approach produced high misclassification rate. Event-based decision trees were then constructed to identify problems associated with particular events. To distinguish between problems associated with events that appeared in multiple problems, support vector machine (SVM) with parameters optimally tuned using particle swarm optimization (PSO) was employed. Parametric data was used as the input to the SVM algorithm and majority voting was employed to determine the final decision for cases with multiple events. A total of 165 SVM models were constructed. This approach improved the overall score from 21 to 48. The method was further enhanced by employing an ensemble of three data driven methods, that is, SVM, random forests (RF) and bagged trees (BT), to build the event based models. With this approach, a score of 51 was obtained . The results demonstrate that the proposed event based method can be effective in maintenance action recommendation based on events codes and parametric data acquired remotely from an industrial equipment.


Controlling the Remaining Useful Lifetime using Self-Optimization

T. Meyer, C. Sondermann-Wölke, J.K. Kimotho, W. Sextro, Chemical Engineering Transactions (2013), 33, pp. 625-630

Self-optimizing mechatronic systems offer possibilities well beyond those of traditional mechatronic systems. Among these is the adaptation of the system behavior to the current situation. To do so, they are able to choose from different working points, which are pre-calculated using multiobjective optimization and are thus Pareto-optimal with regard to the chosen objective functions. In this contribution, a method is presented that allows to continuously control the system degradation by adapting the behavior of a selfoptimizing system throughout its complete lifetime. The current remaining useful lifetime is estimated and then related to the spent lifetime and the desired useful lifetime. Using this information, a reliability-related objective is prioritized using a closed-loop control, which in turn is used to determine the working point of the self-optimizing system. This way, the desired useful lifetime can be achieved. To exemplify the setup of the controller structure and to demonstrate the adaptation of the system behavior, a dynamic model of a clutch system is used. It can be seen that the closed loop controller is able to correct for external perturbations, such as changed requirements, as well as changed system parameters. This way, the modeled system is able to achieve the desired lifetime reliably.


Stick-slip and slip-slip operation of piezoelectric inertia drives - Part II: Frequency-limited excitation

M. Hunstig, T. Hemsel, W. Sextro, Sensors and Actuators A: Physical (2013), 200, pp. 79 - 89

This contribution provides a systematic investigation and performance comparison of different modes of operation for piezoelectric inertia drives. The movement of these motors is classically assumed to consist of steps involving stiction and sliding, resulting in the term ``stick-slip drives''. In the first part of this contribution it has been found that using ideal driving signals, ``slip-slip'' operation without phases of stiction allows very high velocities, while the maximum velocity is limited principally in stick-slip operation. In this part it is shown that slip-slip operation is also suitable for use with real actuators, driven with frequency-limited versions of the ideal signals presented in part I. The motional performance of the motor as well as its wear and the required electric power are investigated for operation with different signals. It is found that for high velocity inertia motors it is recommendable to use actuators with large stroke and to drive them with a signal consisting of two harmonics at a high fundamental frequency, a result that is supported by similar setups implemented experimentally by other authors. Using Lanczos' \sigma factors to calculate the frequency-limited excitation signals instead of standard Fourier series additionally increases the motor performance significantly. The results help motor designers to choose the appropriate mode of operation and to optimise the motor parameters for their individual applications.


Characteristics of Piezoelectric Energy Harvesters in Autonomous Systems

W. Al-Ashtari, M. Hunstig, T. Hemsel, W. Sextro, in: Proceedings of 10th International Workshop on Piezoelectric Materials and Applications and 8th Energy Harvesting Workshop, Hannover, Germany, 14.-17.7.2013, 2013, pp. 159-161

A basic autonomous system powered by a piezoelectric harvester contains three components apart from the harvester: a fullwave rectifier, a reservoir capacitor and an electronic device performing the primary task of the system. In this contribution, a model describing the operation of such a system is derived. It is found that in steady-state operation, the piezoelectric harvester experiences two alternating load conditions due to the rectification process. These alternating load conditions can have a significant effect on the operation of the harvester and must be considered in the design of autonomous systems. The results also show that such an autonomous system works efficiently if it is connected to a high impedance load and excited by a frequency matching the anti-resonance frequency of the piezoelectric harvester.


Increasing Intelligent Systems' Reliability by Using Reconfiguration

T. Meyer , J. Henning Keßler, W. Sextro, A. Trächtler, in: Proceedings of the Annual Reliability and Maintainability Symposium (RAMS), 2013

Self-optimizing mechatronic systems allow the adaptation of the system's behavior to the current situation. This can be used to actively adapt the behavior to the current degradation state of the system or of some of its components. To this end, the Multi-Level Dependability Concept has been developed. In this contribution, we show how the Multi-Level Dependability Concept has been applied to the active suspension module of an innovative rail-bound vehicle. For this module, the usage of control reconfiguration, which is a novel approach to exploit complex redundancy systems, is required. We show that by combining self-optimization with the possibilities given by control reconfiguration, the dependability of a complex mechatronic system can be greatly improved.


Bewertung der Zuverlässigkeit selbstoptimierender Systeme mit dem LARES-Framework

T. Meyer, C. Sondermann-Wölke, W. Sextro, M. Riedl, A. Gouberman, M. Siegle, in: 9. Paderborner Workshop Entwurf mechatronischer Systeme, Heinz Nixdorf Institut, Universität Paderborn, 2013, pp. 161-174

Selbstoptimierende mechatronische Systeme bieten die Möglichkeit, ihr Verhalten an geänderte Umgebungsbedingungen anzupassen. Dazu werden beispielsweise redundante Strukturen genutzt, Reglerparameter angepasst oder Regelstrategien umgeschaltet. Dies kann auch genutzt werden, um die Zuverlässigkeit des Systems zu steigern. Zugleich entstehen aber durch die gesteigerte Komplexität dieser Systeme zusätzliche Risiken. Um sicherzustellen, dass das System dennoch die gestellten Anforderungen bezüglich der Zuverlässigkeit erfüllt, ist eine Modellierung des Gesamtsystems und anschließende Zuverlässigkeitsbewertung notwendig. Dies ist aufgrund der situationsabhängigen Verhaltensanpassung und des nicht intuitiv vorhersehbaren Verhaltens jedoch nicht mit klassischen Verfahren möglich. Ein Modellierungsverfahren, das diese Eigenschaften abbilden kann, ist LARES (LAnguage for REconfigurable dependable Systems). Die Anwendung von LARES zur Bewertung der Zuverlässigkeit eines selbstoptimierenden Systems wird anhand des Feder-Neige-Moduls gezeigt. Es ist eine Baugruppe der Fahrzeuge eines innovativen Bahnsystems, der RailCabs. Das Feder-Neige-Modul dient dazu, unerwünschte Schwingungen des Fahrzeugaufbaus zu minimieren. Mit LARES können die Hardware-Komponenten des Systems, ihre in Abhängigkeit von der aktuellen Situation veränderten Belastungen sowie die nicht-deterministische Verhaltensadaption modelliert werden.


2012

Analysis of different operation modes for inertia motors

M. Hunstig, T. Hemsel, W. Sextro, ACTUATOR 2012 Conference Proceedings (2012), pp. 761-764

Piezoelectric inertia motors, also known as ``stick-slip-drives'', use the inertia of a body to drive it by means of a friction contact in small steps. While these steps normally involve stiction and sliding, the motors can also operate in ``slip-slip'' mode without any phase of static friction. In this contribution, a one degree of freedom model of an inertia motor driven by an ideal actuator is analysed. Start-up and constant velocity operation of the motor are investigated and appropriate quantities to compare ``stick-slip'' and ``slip-slip'' operation are determined. Different aspects such as velocity, uniformity of motion, load capacity, robustness, efficiency, and wear are considered. The analysis allows both modes to be applied advantageously in different applications and can widen the field of application of piezoelectric inertia motors. Motor designers are enabled to choose the appropriate mode of operation and the best drive parameters for their individual applications.


Frequency tuning of piezoelectric energy harvesters by magnetic force

W. Al-Ashtari, M. Hunstig, T. Hemsel, W. Sextro, Smart Materials and Structures (2012), 21(3), pp. 035019

A piezoelectric energy harvester is an electromechanical device that converts ambient mechanical vibration into electric power. Most existing vibration energy harvesting devices operate effectively at a single frequency only, dictated by the design of the device. This frequency must match the frequency of the host structure vibration. However, real world structural vibrations rarely have a specific constant frequency. Therefore, piezoelectric harvesters that generate usable power across a range of exciting frequencies are required to make this technology commercially viable. Currently known harvester tuning techniques have many limitations, in particular they miss the ability to work during harvester operation and most often cannot perform a precise tuning. This paper describes the design and testing of a vibration energy harvester with tunable resonance frequency, wherein the tuning is accomplished by changing the attraction force between two permanent magnets by adjusting the distance between the magnets. This tuning technique allows the natural frequency to be manipulated before and during operation of the harvester. Furthermore the paper presents a physical description of the frequency tuning effect. The experimental results achieved with a piezoelectric bimorph fit the calculated results very well. The calculation and experimental results show that using this tuning technique the natural frequency of the harvester can be varied efficiently within a wide range: in the test setup, the natural frequency of the piezoelectric bimorph could be increased by more than 70\%.


Analytical determination of characteristic frequencies and equivalent circuit parameters of a piezoelectric bimorph

W. Al-Ashtari, M. Hunstig, T. Hemsel, W. Sextro, Journal of Intelligent Material Systems and Structures (2012), 23(1), pp. 15-23

Piezoelectric structures are nowadays used in many different applications. A better understanding of the influence of material properties and geometrical design on the performance of these structures helps to develop piezoelectric structures specifically designed for their application. Different equivalent circuits have been introduced in the literature to investigate the behaviour of piezoelectric transducers. The model parameters are usually determined from measurements covering the characteristic frequencies of the piezoelectric transducer. This article introduces an analytical technique for calculating the mechanical and electrical equivalent system parameters and characteristic frequencies based on material properties and geometry for a cantilever bimorph structure. The model is validated by measurements using a cantilever bimorph and fits the experimental results better than previous models. The model gives a full set of piezoelectric transducer parameters and is therefore well suited for further theoretical investigations of piezoelectric transducers for different applications. The results also show that even small manufacturing tolerances have a considerable effect on the system parameters and characteristic frequencies. This might lead to intolerable deviations, especially in dynamic applications and should be avoided by careful design and production.


Benteler Vehicle Dynamics -- Fahrdynamikentwicklung basierend auf einer neuen Auslegungstheorie

S. Kohl, W. Sextro, A. Zuber, in: 8. Tag des Fahrwerks, Aachen, 2012, 2012, pp. 38-60


Non-perturbing cavitation detection / monitoring in sonochemical reactors

P. Bornmann, T. Hemsel, W. Sextro, T. Maeda, T. Morita, in: Ultrasonics Symposium (IUS), 2012 IEEE International, 2012, pp. 1141-1144

To optimize the ultrasound irradiation for cavitation based ultrasound applications like sonochemistry or ultrasound cleaning, the correlation between cavitation intensity and the resulting effect on the process is of interest. Furthermore, changing conditions like temperature and pressure result in varying acoustic properties of the liquid. That might necessitate an adaption of the ultrasound irradiation. To detect such changes during operation, process monitoring is desired. Labor intensive processes, that might be carried out for several hours, also require process monitoring to increase their reliability by detection of changes or malfunctions during operation. In some applications cavitation detection and monitoring can be achieved by the application of sensors in the sound field. Though the application of sensors is possible, this necessitates modifications on the system and the sensor might disturb the sound field. In other applications harsh, process conditions prohibit the application of sensors in the sound field. Therefore alternative techniques for cavitation detection and monitoring are desired. The applicability of an external microphone and a self-sensing ultrasound transducer for cavitation detection were experimentally investigated. Both methods were found to be suitable and easily applicable.


Anordnung und Verfahren zur mehrdimensionalen Messung von Schwingungen eines Objekts. Patent - EN: Arrangement for multidimensional measurement of oscillations of object, has deflecting units for deflecting beam such that measuring point of object is detectable with beam from spatial directions or one of spatial directions

W. Sextro, M. Hunstig, P. Bornmann, T. Hemsel. Anordnung und Verfahren zur mehrdimensionalen Messung von Schwingungen eines Objekts. Patent - EN: Arrangement for multidimensional measurement of oscillations of object, has deflecting units for deflecting beam such that measuring point of object is detectable with beam from spatial directions or one of spatial directions, Patent DE: 102010033951A1. 2012.

Es wird eine Anordnung zur mehrdimensionalen Messung von Schwingungen eines Objektes vorgeschlagen, umfassend ein Vibrometer und eine erste Ablenkeinheit, mittels welcher der Messstrahl des Vibrometers in wenigstens zwei erste Raumrichtungen ablenkbar ist, sowie wenigstens eine zweite Ablenkeinheit, mittels welcher der aus einer der wenigstens zwei ersten Raumrichtungen auf eine zweite Ablenkeinheit eintreffende Messstrahl derart ablenkbar ist, dass ein Messpunkt des Objekts aus einer ersten Raumrichtung und wenigstens einer zweiten Raumrichtung oder wenigstens zwei zweiten Raumrichtungen damit erfassbar ist. Bei dem zum Betrieb der Anordnung vorgesehenen Verfahren wird der Messstrahl eines Vibrometers in wenigstens zwei erste Raumrichtungen abgelenkt, woraufhin wenigstens ein Messstrahl einer ersten Raumrichtung ein zweites Mal derart abgelenkt wird, dass ein Messpunkt des Objekts aus einer ersten Raumrichtung und wenigstens einer zweiten Raumrichtung oder wenigstens zwei zweiten Raumrichtungen erfasst wird, insbesondere so dass die zu untersuchenden Bewegungskomponenten in den Messsignalen, welche entlang der ersten und zweiten Raumrichtungen gewonnen werden, enthalten sind. The arrangement has a first deflecting unit (3) for deflecting a measuring beam of a vibrometer (2) in spatial directions (4-6, 4-6). Second and third deflecting units (7, 8) deflect the beam arriving from one of the spatial directions such that a measuring point (9) of an object (1) is detectable with the beam from the spatial direction or the spatial directions. The first deflecting unit is designed as a scanning unit, where the measuring point is detected by the scanning unit. A measuring instrument measures focus quality and is connected to actuators for adjustment of the focus quality. An independent claim is also included for a method for multidimensional measurement of oscillations of an object.


Conceptual Design of Advanced Condition Monitoring for a Self-Optimizing System based on its Principle Solution

C. Sondermann-Wölke , T. Meyer, R. Dorociak, J. Gausemeier, W. Sextro, in: Proceedings of the 11th International Probabilistic Safety Assessment and Management Conference (PSAM11) and The Annual European Safety and Reliability Conference (ESREL2012), 2012

The rapid development of communication and information technology opens up fascinating perspectives, which go far beyond the state of the art in mechatronics: mechatronic systems with inherent partial intelligence. These so called self-optimizing systems adapt their objectives and behavior autonomously and flexibly to changing operating conditions. On the one hand, securing the dependability of such systems is challenging due to their complexity and non-deterministic behavior. On the other hand, self-optimization can be used to increase the dependability of the system during its operation. However, it has to be ensured, that the self-optimization works dependable itself. To cope with these challenges, the multi-level dependability concept was developed. It enables predictive condition monitoring, influences the objectives of the system and determines suitable means to improve the system's dependability during its operation. In this contribution we introduce a procedure for the conceptual design of an advanced condition monitoring based on the system's principle solution. The principle solution describes the principal operation mode of the system and its desired behavior. It is modeled using the specification technique for the domain-spanning description of the principle solution of a self-optimizing system and consists of a coherent system of eight partial models (e.g. requirements, active structure, system of objectives, behavior, etc.). The partial models are analyzed separately in order to derive the components of the multi-level dependability concept. In particular, the reliability analysis of the partial model active structure is performed to identify the system elements to be monitored and parameters to be measured. The principle solution is extended accordingly: e.g. with system elements required for the realization of the dependability concept. The advantages of the method are shown on the self-optimizing guidance module of a railroad vehicle.


2011

Dependability Analysis of the Degradation Behavior of Mechatronics Systems with Different Operating Strategies

O. Lurie, I. Kromov, A. Trächtler, C. Sondermann-Wölke, W. Sextro, in: 25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung und Betrieb zuverlässiger Produkte, 2011, pp. 99-110


Zuverlässigkeitsorientierte Mehrzieloptimierung zur Aktorrekonfiguration eines X-by-wire-Fahrzeugs

C. Sondermann-Wölke, W. Sextro, P. Reinold, A. Trächtler, in: 25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung und Betrieb zuverlässiger Produkte, 2011, pp. 291-302

Dieser Beitrag stellt ein Konzept vor, welches die Methode der Mehrzieloptimierung mit einer Online-Bewertung des aktuellen Systemzustands kombiniert. Dieses erlaubt Maßnahmen zur Zuverlässigkeitssteigerung abzuleiten. Das Konzept wird auf ein X-by-wire-Fahrzeug mit Einzelradaktorik angewandt. Dabei steht zunächst die Beeinflussung der Ziele der Mehrzieloptimierung zugunsten der Zuverlässigkeit des Systems im Vordergrund. In Simulationen wird gezeigt, dass über die Wahl und Gewichtung der Zielfunktionen die Quer- und Längskräfte an den Rädern vorteilhaft verteilt werden können. In this contribution a concept is illustrated, which combines the multi-objective optimization technique with an online assessment of the current system state. This allows deriving measures to increase the reliability of the system. The concept is applied to an X-by-wire vehicle with single-wheel actuators. The emphasis is here mostly on the influence of the objectives of the multiobjective optimization for the benefit of the reliability of the system. It is demonstrated in simulations, that the lateral and longitudinal forces at the wheels can be distributed advantageously by the selection of the suitable objective functions and the appropriate weights.


Friction in wheel--rail contact: A model comprising interfacial fluids, surface roughness and temperature

C. Tomberger, P. Dietmaier, W. Sextro, K. Six, Wear (2011), 271, pp. 2 - 12

A profound description of friction in wheel--rail contact plays an essential role for optimization of traction control strategies, as input quantity for railway simulations in general and for the estimation of wear and rolling contact fatigue. A multitude of wheel--rail contact models exists, however, traction--creepage curves obtained from measurements show quantitative and qualitative deviations. There are several phenomena which influence the traction--creepage characteristics: Mechanisms resulting from surface roughness, frictional heating or the presence of interfacial fluids can have a dominating influence on friction. In this paper, a new wheel--rail contact model, accounting for these influential parameters, will be presented. The presented model accounts for the interaction of an interfacial fluid model for combined boundary and mixed lubrication of rough surfaces with a wheel--rail contact model that additionally accounts for frictional heating. A quantitative comparison with measurements found in the literature is not conducted, since the exact conditions of the measurements are mostly unknown and parameters can easily be adjusted to fit the measurements. Emphasis is placed on the qualitative behavior of the model with respect to the measurements and good agreement is found. The dependence of the maximum traction coefficient on rolling velocity, surface roughness and normal load is studied under dry and water lubricated conditions.


2010

Reibungsdämpfung in ausgedehnten, verschraubten Fügestellen

J.S. Hölzl, W. Sextro, PAMM (2010), 10(1), pp. 247-248

Bei der Konstruktion von Maschinen ist es oftmals erforderlich, Schwingungen minimal zu halten. Um z.B. die Lebensdauer zu erhöhen, Material einzusparen oder den Geräuschpegel gering zu halten muss oft ein großer Aufwand zur Dämpfung von auftretenden Schwingungen betrieben werden. In vielen technischen Anwendungen werden Einzelteile miteinander verschraubt. Diese Fügestellen können gezielt und mit wenig Aufwand zur Schwingungsdämpfung herangezogen werden. Die Berechnung des dynamischen Verhaltens verschraubter Strukturen stellt immer noch eine Herausforderung dar. Es wurde eine Methode entwickelt, um den eingeschwungenen Zustand elastischer, miteinander verschraubter Körper mit rauen Fügestellen bei periodischer Anregung zu berechnen. Als Basis dienen Finite Elemente Modelle der einzelnen Teile, deren Freiheitsgrade durch modale Kondensation reduziert werden. Unter Anwendung des Verfahrens von Ritz und Galerkin wird eine Näherungslösung für den eingeschwungenen Zustand des nichtlinearen, gekoppelten Systems ermittelt. Abhängig von den Schraubenvorspannkräften sowie den bestimmenden Parametern der Kontaktflächen, Rautiefe und Reibungskoeffizient, kann die Systemantwort berechnet und optimiert werden. Um die Berechnungsmethode zu verifizieren wurden Experimente durchgeführt. Der Vergleich zwischen Messung und Rechnung zeigt eine gute Übereinstimmung. ({\copyright} 2010 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)


Improving the Performance of Piezoelectric Inertia Motors

M. Hunstig, T. Hemsel, W. Sextro, in: ACTUATOR 2010 Conference Proceedings, 2010, pp. 657-661

A model based design approach for improved piezoelectric inertia motors is presented. Three velocityoptimized movement patterns for the driving body have been derived. The influence of the motor parameters and the process of designing an application specific motor with maximum velocity are shown. A simple dynamic model of the piezoelectric actuator is used to calculate the voltage signal for achieving the desired movement pattern. Observed distortions of the optimum pattern, their influence on the motion of the driven body and different methods to reduce them are discussed.


Max number of publications reached - all publications can be found in our Research Infomation System.

Open list in Research Information System

The University for the Information Society