<jats:p>Abstract. In order to reduce global energy consumption in production and industry along with the associated CO2 emissions, existing resources must be used more efficiently. This includes the energy-efficient and comprehensive recycling of a wide range of metals. Especially for the production of aluminium, there is a large potential for saving energy using efficient recycling processes. With regard to the recycling of aluminium studies have shown that solid-state recycling processes are significantly more efficient considering the used energy and resources compared to the conventional, smelting-metallurgical recycling process. In this paper, the direct and energy-efficient friction-induced recycling process (FIRP) based on the conform process is further described and analysed in terms of the temperature-property relationships. For this purpose, the influence of the processing temperature on the microstructure and properties of the recycled semi-finished products is investigated using the toll system that enables an ECAP forming. Specific sections of the (in theory) infinite, recycled semi-finished product are taken and analysed at different process temperatures of the solid state recycling process. Based on these sections, the properties in terms of mechanical hardness, strength, ductility and grain size are analysed and a degressive relationship between process temperature and mechanical hardness up to a temperature of 270 °C can be shown. Applying the Hall-Petch relationship, it is analysed whether there is a correlation between the strength and the microstructure in the form of the grain size. </jats:p>

<jats:p>Abstract. Requirements of multi-material construction involve adjustments to standard joining techniques. Especially the growing importance of integral cast components poses additional engineering challenges for the industry. One approach to achieve these goals are adaptable joining elements formed by friction spinning. This approach uses friction-induced heat to form customisable joining elements to join sheets for different boundary conditions, even for brittle cast materials. It is possible to react immediately to adapt to the joining process inline and reduce the amount of different joining elements. As the joining partner serve casting plates of the aluminium casting alloy EN AC–AlSi9, which is processed in the sand casting. Joining hypoeutectic AlSi alloys constitutes a challenge because the brittle character of these cause cracks in the joint during conventional mechanical joining. Furthermore, the friction-induced heat of the novel joining process causes a finer microstructure in the hypoeutectic AlSi9 casting alloy. In particular, the eutectic Si is more fine-grained, resulting in higher joint ductility. This study indicates the joining suitability of a hypoeutectic aluminium casting alloy in combination with adaptive manufactured additional joining elements. Here, various mechanical and microstructural investigations validate the influence of the thermomechanical joining technique. In conclusion, the potential of this joining process is presented regarding the joinability of cast aluminium components. </jats:p>