Prof. Dr. Hans-Joachim Schmid

Faculty of Mechanical Engineering
Section Owner - Employee - Studiendekan
Key research area Sustainable Materials, Processes and Products
Head of Institute - Professor - Chairman of the Paderborn Institute for Additive Fabrication (PIAF)
Partikelverfahrenstechnik (PVT)
Section Owner - Professor - Full Professor
Head - Professor - Scientific Director
Paderborn Institute for Additive Fabrication (PIAF)
Professor - Chairman
Institute for Lightweight Design with Hybrid Systems
Member - Professor - Vorstand FK LEM
33098 Paderborn

Miscellaneous |
|
Since 01.06.2008 |
Scientific Director of "Direct Manufacturing Research Center" at University of Paderborn |
Since 01.10.2006 |
Chair of Particle Technology at University of Paderborn |
15.01.2005 - 30.09.2006 |
Permanent scientist at Chair of Solids and Interface Process Engineering at University of Erlangen-Nuremberg |
15.06.1999 - 14.01.2005 |
Scientist at Chair of Solids and Interface Process Engineering (Prof. Wolfgang Peukert) at TU Munich and University of Erlangen-Nuremberg (as of 15.10.2003) |
02.06.1993 - 14.06.1999 |
Scientific Assistant at Institute of Mechanical Process Engineering and Mechanics at University of Karlsruhe (Germany) |
19.12.1998 |
Obtaining doctorate from University of Karlsruhe (Germany) Title of PhD thesis: On Particle Transport in Electrostatic Precipitators (summa cum laude) |
01.10.2018 - 01.06.1993 |
Studying Chemical Engineering at University Fridericiana at Karlsruhe (Germany) graduated with 'Dipl.-Ing.' |
22.01.1967 |
born in Waiblingen (Germany) |
Since 01.06.2008 |
Scientific Director of "Direct Manufacturing Research Center" at University of Paderborn |
Since 01.10.2006 |
Chair of Particle Technology at University of Paderborn |
15.01.2005 - 30.09.2006 |
Permanent scientist at Chair of Solids and Interface Process Engineering at University of Erlangen-Nuremberg |
15.06.1999 - 14.01.2005 |
Scientist at Chair of Solids and Interface Process Engineering (Prof. Wolfgang Peukert) at TU Munich and University of Erlangen-Nuremberg (as of 15.10.2003) |
02.06.1993 - 14.06.1999 |
Scientific Assistant at Institute of Mechanical Process Engineering and Mechanics at University of Karlsruhe (Germany) |
19.12.1998 |
Obtaining doctorate from University of Karlsruhe (Germany) Title of PhD thesis: On Particle Transport in Electrostatic Precipitators (summa cum laude) |
01.10.2018 - 01.06.1993 |
Studying Chemical Engineering at University Fridericiana at Karlsruhe (Germany) graduated with 'Dipl.-Ing.' |
22.01.1967 |
born in Waiblingen (Germany) |
Open list in Research Information System
2023
I. Kletetzka, M. Kosanke, D. Meinderink, V. Neßlinger, G. Grundmeier, H. Schmid, 2023
M. Neukötter, S. Jesinghausen, H. Schmid. Instabilities of Polymer Melt Suspensions under Uniaxial Extension (Poster). In: International Congress on Rheology, Athens, 2023.
S. Josch, S. Jesinghausen, C. Dechert, H. Schmid, Rheologica Acta (2023)
S.H. Klippstein, I. Kletetzka, I. Sural, H. Schmid, The International Journal of Advanced Manufacturing Technology (2023)
T. Rüther, H. Schmid. CDMA: Centrifugal Differential Mobility Analyzer - Ein Messprinzip zur Bestimmung von Multidimensionalen Partikeleigenschaften (Vortrag). In: DECHEMA Jahrestreffen PMT 2023, Paderborn, 2023.
S. Josch, S. Jesinghausen, H. Schmid, Applied Rheology (2023), 33(1)
M.J. Rüther, S.H. Klippstein, S. Ponusamy, T. Rüther, H. Schmid, Powder Technology (2023), 422, 118460
S. Ponusamy, H. Schmid. Dynamisch-mechanische Polymerpartikelverrundung zur Verbesserung der Fließfähigkeit für das selektive Lasersintern. In: Jahrestreffen der Fachgruppen Zerkleinern / Klassieren / Agglomerations- und Schüttguttechnik, Braunschweig, 2023.
M. Neukötter, S. Jesinghausen, H. Schmid. Particles as Seeds for Instabilities in Uniaxially Elongated Polymer Suspension Filaments (Presentation). In: Annual Meeting of the German Rheological Society (DRG) , Berlin, 2023.
2022
M. Neukötter, S. Jesinghausen, H. Schmid, Rheologica Acta (2022)
J. Beimdiek, H. Schmid. A combined flue gas cleaning system with a novel entrained flow SCR using an online synthesized catalyst (Poster). In: 1st International Workshop on Reacting Particle-Gas Systems, Bochum, 2022.
M.J. Rüther, S.H. Klippstein, S. Ponusamy, S. Jesinghausen, H. Schmid, Werkstoffe (2022), 6, pp. 18 - 19
M.J. Rüther, S.H. Klippstein, S. Ponusamy, S. Jesinghausen, H. Schmid, Werkstoffe (2022), 5, pp. 28-29
J. Beimdiek, F. Prill, M. König, M. Müller, I. Hartmann, H. Schmid, in: 13th World Filtration Congress Proceedings, 2022
J. Beimdiek, H. Schmid. A combined flue gas cleaning system with a novel entrained flow SCR using online synthesized catalyst particles (Poster). In: 11th International Aerosol Conference (IAC), Athens, 2022.
J. Beimdiek, H. Schmid. Novel entrained flow SCR using online synthesized catalyst particles (Poster). In: 13th World Filtration Congress, San Diego, 2022.
J. Beimdiek, H. Schmid. Novel entrained flow SCR using online synthesized catalyst particles in flue gas cleaning systems (Presentation). In: 25th ETH-Conference on Combustion Generated Nanoparticles, Zürich, 2022.
M. Neukötter, S. Jesinghausen, H. Schmid. Triggering instabilities of polymer solution suspensions under uniaxial extension (Presentation). In: Joint Online Symposium on Rheology, Digital, 2022.
M. Neukötter, S. Jesinghausen, H. Schmid. Instability analysis of suspensions with a polymer solution matrix (Presentation). In: Annual European Rheology Conference, Sevilla, 2022.
M.J. Rüther, S.H. Klippstein, H. Schmid. Flowability of polymer powders at elevated temperatures for additive manufacturing. In: 9th Congress on Particle Technology, Madrid, 2022.
T. Rüther, S. Jesinghausen, H. Schmid. A novel correction method for the shear rate in a couette rheometer (Vortrag). In: AERC , Sevilla, 2022.
T. Rüther, H. Schmid. Multidimensional particle characterization: Centrifugal Differential Mobility Analyzer (Poster). In: World Congress on Particle Technology 2022, Madrid, 2022.
T. Rüther, S. Jesinghausen, H. Schmid. NEW CORRECTION APPROACHES FOR DETERMINING THE TRUE SHEAR RATE IN A COAXIAL-RHEOMETER (Vortrag). In: Joint Online Symposium on Rheology 2022, 2022.
S.H. Klippstein, F. Heiny, N. Pashikanti,, M. Gessler, H. Schmid, JOM - The Journal of The Minerals, Metals & Materials Society (TMS) (2022), 74, pp. 1149–1157
I. Kletetzka, R. Gawlikowicz, H. Schmid, in: Proceedings of the 33nd Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, 2022
S.H. Klippstein, H. Schmid, in: Proceedings of the 33nd Annual International Solid Freeform Fabrication Symposium, 2022
I. Kletetzka, S.H. Klippstein, H. Schmid, in: Proceedings of the 33nd Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, 2022
S. Schmidt, M. Gräßer, H. Schmid, SIAM Journal on Scientific Computing (2022), 44(4), pp. B1175-B1194
D. Menge, H. Schmid, Macromolecular Symposia (2022), 404(1), 2100397
2021
C. Kummert, H. Schmid, L. Risse, G. Kullmer, Journal of Materials Research (2021)
D. Menge, H. Schmid, 2021
R. Tischendorf, H. Schmid, M. Bieber, M. Reddemann, R. Kneer, F. Fröde, T. Grenga, H. Pitsch. Einfluss der Zerstäubung auf die Partikelsynthese in Sprayflammen. In: Jahrestreffen der ProcessNet-Fachgruppe MPS, Paderborn, 2021.
S. Pawelczyk, S. Jesinghausen, H. Schmid, 2021
M.J. Rüther, D. Schulze, H. Schmid. Flowability Measurements of Different SLS Materials at Elevated Temperatures with a Modified Schulze Ring Shear Tester. In: Solid Freeform Fabrication Symposium, digital, 2021.
S. Schumacher, C. Asbach, H. Schmid, Gefahrstoffe (2021), pp. 16-28
I. Kletetzka, C. Kummert, H. Schmid, in: Proceedings of the 32nd Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, 2021
J. Ludwig, C. Kykal, H. Schmid. Assessing spreading and removal of virus laden aerosols in different settings using an aerosol method (Presentation). In: European Aerosol Conference, 2021.
J. Ludwig, H. Schmid. Synthese und asymmetrische Funktionalisierung von submikronen Janus-Polymer-Partikeln in der Gasphase (Poster). In: Jahrestreffen der ProcessNet-Fachgruppe Aerosoltechnik, 2021.
M. Neukötter, S. Jesinghausen, H. Schmid. Theoretische Beschreibung des Tropfenbildungsprozesses bei der Filament Extension Atomization: Entwicklung eines Vorhersagemodells für die Tropfengröße (Poster). In: Jahrestreffen der ProcessNet-Fachgruppen Computational Fluid Dynamics und Mehrphasenströmungen, Online, 2021.
M. Neukötter, S. Jesinghausen, H. Schmid. Filament Extension Atomization – A novel Process for Powder Production? (Presentation). In: Annual European Rheology Conference, Online, 2021.
2020
D. Menge, S.H. Klippstein, H. Schmid, 2020
D.B. Rasche, L. Tigges, H. Schmid, Review of Scientific Instruments (2020), 91, pp. 055104
C. Kummert, W. Diekmann, K. Tews, H. Schmid, in: 29th Annual International Solid Freeform Fabrication Symposium, 2020, pp. 735-744
R. Tischendorf, H. Schmid, M. Bieber, M. Reddemann , R. Kneer, F. Fröde, T. Grenga, H. Pitsch. Influence of differing nozzle configurations on the final particle characteristics and particle structure evolution in spray flames. In: 4th International Symposium Gas‐Phase Synthesis of Functional Nanomaterials, Duisburg, 2020.
M. Haist, J. Link, D. Nicia, S. Leinitz, C. Baumert, T. von Bronk, D. Cotardo, M. Eslami Pirharati, S. Fataei, H. Garrecht, C. Gehlen, I. Hauschildt, I. Ivanova, S. Jesinghausen, C. Klein, H. Krauss, L. Lohaus, D. Lowke, O. Mazanec, S. Pawelczyk, U. Pott, N.W. Radebe, J.J. Riedmiller, H. Schmid, W. Schmidt, E. Secrieru, D. Stephan, M. Thiedeitz, M. Wilhelm, V. Mechtcherine, Materials and Structures (2020)
S. Pawelczyk, M. Kniepkamp, S. Jesinghausen, H. Schmid, Materials (2020), 467
2019
D. Menge, R. Walter, H. Schmid, U.P. Breuer, 2019
H. Schmid, G. Grundmeier, M. Dörmann, A.G. Orive, T. de los Arcos, B. Torun, in: Particles in Contact, 2019
S.H. Klippstein, H. Schmid, in: Proceedings of the 16th Rapid.Tech Conference, 2019
R. Tischendorf, M. Bieber, R. Kneer, H. Schmid. Representative Sample Extraction from Spray Flames for SMPS and HR-TEM Measurements. In: PARTEC 2019 International Congress on Particle Technology, Nürnberg, 2019.
S.H. Klippstein, A. Duchting, T. Reiher, F. Hengsbach, D. Menge, H. Schmid, in: 30th Annual International Solid Freeform Fabrication Symposium, 2019, pp. 1932-1945
I. Giner, B. Torun, Y. Han, B. Duderija, D. Meinderink, A.G. Orive, M.T. de los Arcos de Pedro, C. Weinberger, M. Tiemann, H. Schmid, G. Grundmeier, Applied Surface Science (2019), pp. 873-879
2018
S. Abishek, A. King, J. Schuler, G. Kasper, H. Schmid, B. Mullins, Separation and Purification Technology (2018), pp. 344-352
D. Menge, P. Delfs, M. Töws, H. Schmid, in: 29th Annual International Solid Freeform Fabrication Symposium, 2018, pp. 687-697
C. Kummert, S. Josupeit, H. Schmid, Journal of Minerals, Metals and Materials Society (2018), 70(3), pp. 425-430
H. Schmid, D. Rasche. Bestimmung von Nanopartikeleigenschaften eines Aerosols, Patent 10 2017 101 766.6. 2018.
2017
J. Lohn, H. Schmid, in: Rapid.Tech – International Trade Show & Conference for Additive Manufacturing, 2017
J. Laube, M. Dörmann, H. Schmid, L. Mädler, L. Colombi Ciacchi, The Journal of Physical Chemistry C (2017), pp. 15294-15303
M. Dörmann, H. Schmid, Powder Technology (2017), pp. 175-183
D. Menge, S. Josupeit, P.. Delfs, H. Schmid, in: Additive Fertigung von Bauteilen und Strukturen, Springer Vieweg, 2017, pp. 105-120
S. Josupeit, H. Schmid, Journal of Applied Polymer Science (2017), 134(42)
2016
S. Josupeit, L. Ordia, H. Schmid, Additive Manufacturing (2016), pp. 189-196
H. Schmid, S. Pieper, Applied Rheology (2016)
W. Kniffka, M. Eichmann, G. Witt, S. Josupeit, P. Delfs, T. Lieneke, G. Adam, H. Schmid. Geometrische Genauigkeit von Lasersinter-Bauteilen: Einflüsse und Maßnahmen / Dimensional accuracy of polymer laser sintered parts: Influences and measures. 2016.
S. Pieper, H. Schmid, Journal of Non-Newtonian Fluid Mechanics (2016), pp. 1-7
J. Gausemeier, M. Schmidt, R. Anderl, H. Schmid, C. Leyens, G. Seliger, M. Karg, M. Kage, acatech - Deutsche Akademie der Technikwissenschaften, 2016
S. Josupeit, P. Delfs, D. Menge, H. Schmid, in: 27th Annual International Solid Freeform Fabrication Symposium , 2016, pp. 2077-2086
P. Delfs, M. Tows, H. Schmid, Additive Manufacturing (2016), 2(12, Part B), pp. 214-320
P. Delfs, H. Schmid, in: Fraunhofer Direct Digital Manufacturing Conference, 2016, pp. 411-414
S. Josupeit, H. Schmid, in: International Congress on Particle Technology (PARTEC) , 2016
S. Josupeit, P. Delfs, T. Lieneke, G. Adam, M. Gessler, H. Pfisterer, H. Schmid, in: Rapid Tech - International Trade Show & Conference for Additive Manufacturing , 2016, pp. 107-120
S. Lammers, G. Adam, H. Schmid, R. Mrozek, R. Oberacker, M. Hoffmann, F. Quattrone, B. Ponick, in: EDPC 2016, 2016
S. Josupeit, P. Delfs, T. Lieneke, H. Schmid, in: 27th Annual International Solid Freeform Fabrication Symposium , 2016
S. Jesinghausen, R. Weiffen, H. Schmid, Experiments in Fluids (2016)
S. Pieper, H. Schmid, Journal of Non-Newtonian Fluid Mechanics (2016), pp. 1-7
2015
S. Schiller, C. Hellmich, H. Schmid, Chemical Engineering & Technology (2015), pp. 491-498
J.V. Erler, S. Machunsky, S. Franke, P. Grimm, H. Schmid, U.A. Peuker, in: Colloid Process Engineering, 2015
L. Tigges, A. Wiedensohler, K. Weinhold, J. Gandhi, H. Schmid, Journal of Aerosol Science (2015), pp. 77-86
L. Tigges, A. Jain, H. Schmid, Journal of Aerosol Science (2015), pp. 119-134
S. Schiller, H. Schmid, Powder Technology (2015), pp. 96-105
M. Dörmann, H. Schmid, Procedia Engineering (2015), pp. 14-23
P. Delfs, Z. Li, H. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 514-526
S. Josupeit, H. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 190-199
S. Josupeit, J. Lohn, E. Hermann, M. Gessler, S. Tenbrink, H. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 540-549
P. Delfs, M. Toews, H. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 1334-1344
S. Josupeit, S. Tutzschky, M. Gessler, H. Schmid, in: Proceedings of the Rapid Tech 2015, Springer Vieweg, 2015, pp. 63-78
I. Koke, K. Dibblee, F. Hankeln, S. Seidel, A. Trächtler, H. Schmid, in: 44. Jahrestagung der Deutschen Gesellschaft für Hochschuldidaktik - Hochschuldidaktik im Dialog, Paderborn, 2015
2014
S. Pieper, N. Kirchhoff, H. Schmid, Rheologica Acta (2014), pp. 69-75
S. Schiller, H. Schmid, Chemical Engineering & Technology (2014), pp. 1009-1020
M. Dörmann, H. Schmid, Langmuir (2014), pp. 1055-1062
P. Delfs, A. Herale, Z. Li, H. Schmid, in: 25th Annual International Solid Freeform Fabrication Symposium, 2014, pp. 1250-1258
S. Josupeit, H. Schmid, in: 25th Annual International Solid Freeform Fabrication Symposium, 2014, pp. 49-58
S. Josupeit, S. Rüsenberg, N. Rupp, M. Gessler, H. Schmid, in: 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2014), 2014, pp. 2383-2385
S. Rüsenberg, S. Josupeit, H. Schmid, Advances in Mechanical Engineering (2014), 6, pp. 1687-8140
S. Josupeit, L. Ordia, H. Schmid, in: International Conference on Additive Technologies, 2014, pp. 222-227
P. Delfs, H. Schmid, in: 25th Annual International Solid Freeform Fabrication Symposium, 2014, pp. 1250-1258
2013
J. Erler, S. Machunsky, P. Grimm, H. Schmid, U.A. Peuker, Powder Technology (2013), 247, pp. 265-269
S. Schiller, H. Schmid, Chemie Ingenieur Technik (2013), pp. 1324-1328
S. Josupeit, S. Rüsenberg, H. Schmid, in: 24th Annual International Solid Freeform Fabrication Symposium , 2013, pp. 44-54
S. Rüsenberg, H. Schmid, in: International Conference of the Polymer-Processing-Society (PPS), 2013
Max number of publications reached - all publications can be found in our Research Infomation System.
Lebenslauf
ab 2006 | Lehrstuhlinhaber LS für Partikelverfahrenstechnik (ehemals Mechanische Verfahrenstechnik und Umweltverfahrenstechnik) der Universität Paderborn |
1999-2006 | Mitarbeiter am LS für Feststoff- und Grenzflächenverfahrenstechnik der TU München bzw. der Universität Erlangen-Nürnberg Arbeitsgebiete: Mehrphasenströmungen, Nanopartikelsynthese, Partikelcharakterisierung und Simulationsmethoden für disperse Systeme |
1998 | Promotion zum Dr.-Ing. am LS für Mechanische Verfahrenstechnik und Mechanik der Universität Karlsruhe zum Thema "Zum Partikeltransport in Elektrischen Abscheidern" |
1993 | Diplom der Fakultät für Chemieingenieurwesen an der Universität Karlsruhe |