Mechanical joining technologies are increasingly used in multi-material lightweight constructions and offer opportunities to create versatile joining processes due to their low heat input, robustness to metallurgical incompatibilities and various process variants. They can be categorised into technologies which require an auxiliary joining element, or do not require an auxiliary joining element. A typical example for a mechanical joining process with auxiliary joining element is self-piercing riveting. A wide range of processes exist which are not requiring an auxiliary joining element. This allows both point-shaped (e.g., by clinching) and line-shaped (e.g., friction stir welding) joints to be produced. In order to achieve versatile processes, challenges exist in particular in the creation of intervention possibilities in the process and the understanding and handling of materials that are difficult to join, such as fiber reinforced plastics (FRP) or high-strength metals. In addition, predictive capability is required, which in particular requires accurate process simulation. Finally, the processes must be measured non-destructively in order to generate control variables in the process or to investigate the cause-effect relationship. This paper covers the state of the art in scientific research concerning mechanical joining and discusses future challenges on the way to versatile mechanical joining processes.

<jats:p>The adaptive joining process employing friction-spun joint connectors (FSJC) is a promising method for the realization of adaptable joints and thus for lightweight construction. In addition to experimental investigations, numerical studies are indispensable tools for its development. Therefore, this paper includes an analysis of boundary conditions for the spatial discretization and mesh modeling techniques, the material modeling, the contact and friction modeling, and the thermal boundary conditions for the finite element (FE) modeling of this joining process. For these investigations, two FE models corresponding to the two process steps were set up and compared with the two related processes of friction stir welding and friction drilling. Regarding the spatial discretization, the Lagrangian approach is not sufficient to represent the deformation that occurs. The Johnson-Cook model is well suited as a material model. The modeling of the contact detection and friction are important research subjects. Coulomb’s law of friction is not adequate to account for the complex friction phenomena of the adaptive joining process. The thermal boundary conditions play a decisive role in heat generation and thus in the material flow of the process. It is advisable to use temperature-dependent parameters and to investigate in detail the influence of radiation in the entire process.</jats:p>

Nowadays, the production of modern lightweight structures, like a body in white structure requires a wide variety of mechanical joining processes. To fulfill the various demands, mechanical joining processes and joining elements (JE) are used. Very often, they are adapted to the application, which leads in turn to a numerous of different variants, high costs, and loss of the process chain versatility. To overcome this drawback, an innovative approach is the usage of individually produced and task-adapted JE, the so-called friction spun joint connectors (FSJC). These connectors can be modified in shape as well as in material properties. This flexibility offers high potential for lightweight design but also increases the necessary analytical effort regarding the forming process as well as the manufactured joint's properties. Therefore, a new analysis strategy based on the Finite-Element-Method (FEM) is proposed, which numerically determines the local load bearing capacity within a given joint in order to identify the critical regions for load transfer. The process of joining element manufacturing and the analysis strategy will be described in detail and optimization results of the joints are shown. Numerical results are discussed and possible recommendations for joint manufacturing are derived.