Brüggemann, J.-P.; Reschetnik, W.; Kullmer, G.; Richard, H.A.;  Aydinöz, M.E.; Hoyer, K.-P.; Schaper, M.:Optimierung der Werkstoffeigenschaften von selektiv lasergeschmolzenem Aluminium 7075.49. Tagung des DVM-Arbeitskreises Bruchmechanik und Bauteilsicherheit. 14.-15.02.2017, Mittweida

Grydin, O.; Andreiev, A.; Briukhanov, A.; Briukhanova, Z.; Schaper, M.: Evolution of microstructure and properties of a two-phase low-carbon steel at cold asymmetric rolling. Steel Research International. 2017 (87)

Grydin, O.; Oginskyi, I.K.; Bondarenko, S.V.; Schaper, M.: Device for twin-roll casting of profiled strips. Patent UA113368, publ. on 10.01.2017, filed on 04.01.2016, appl. No. a201600100. (in Ukrainian)

Grydin, O.; Nürnberger, F.; Schaper, M.: Influence of sticking on the roll topography at twin-roll casting of aluminum alloys. Light Metals 2017. Springer, TMS, 2017. – P. 827-831.

Stolbchenko, M.; Grydin, O.; Schaper, M.: Twin-roll casting of aluminum-steel clad strips: static and dynamic mechanical properties of the composite. Light Metals 2017. Springer, TMS, 2017. – P. 843-851.

Andreiev, A.; Grydin, O.; Schaper, M.: Influence of a rapid heating on the microstructure and properties of press-hardening steel sheets. Proc. of the 3rd Pan American Materials Congress, 26th February-2nd March, San Diego, Springer, TMS, 2017. – P. 723-736.

Cieslar, M.; Bajer, J.; Zimina, M.; Slapakova, M.; Grydin, O.: Properties and microstructure of twin-roll cast Al-Mg alloy containing Sc and Zr. IOP Conf. Series: Materials Science and Engineering. 2017 (179). DOI: 10.1088/1757-899X/179/1/012012

Kustra, P.; Milenin, A.; Byrska-Wójcik, D.; Grydin, O.; Schaper, M.: The process of ultra-fine wire drawing for magnesium alloy with the guaranteed restoration of ductility between passes. Journal of Materials Processing Technology. 2017 (247). - P. 234-242. DOI: 10.1016/j.jmatprotec.2017.04.022

M. Wiesener, K. Peters, A. Taube, A. Keller, K.-P. Hoyer, T. Niendorf, G. Grundmeier: Corrosion properties of bioresorbable FeMn-Ag alloys prepared by selective laser melting. Materials and Corrosion. DOI: 10.1002/maco.201709478

Taube, A.; Reschetnik, W.; Pauli, L.; Hoyer, K.-P.; Kullmer, G.; Schaper, M.: Numerische und mechanische Untersuchung additiv gefertigter TiAl6V4 Gitterstruk-turen. Additive Fertigung von Bauteilen und Strukturen, Herausgeber Richard, H.A.; Schramm, B.; Zipsner, T., Springer Verlag.  

Bondarenko, S.; Grydin, O.; Schaper, M: Investigation of dependence of temperature and strain on thin elements of profiled strips at twin-roll casting with an additional thermal resistance. Materials Working by Pressure. 2017 (44), Vol. 1, P. 89-95. (in Russian)

Frolov, Ya.; Stolbchenko, M.; Andreiev, A.; Golovko, O.; Grydin, O.; Schaper, M.; Samsonenko, A.: FEM analysis of multilayer pipes designed for subsea umbilicals. Plastic Deformation of Metals, Ed. by Ya. Frolov. Dnipro, Accent PP, 2017. - P. 159-171.

Grydin, O.; Oginskyi, I.K.; Schaper, M.: Technological casting-rolling line for experimental investigation of the twin-roll casting process at the Paderborn University. Plastic Deformation of Metals, Ed. by Ya. Frolov. Dnipro, Accent PP, 2017. - P. 210-220. (in Russian)

Tillmann, W.; Schaak, C.; Nellesen, J.; Schaper, M.; Aydinöz, M.E.; Hoyer, K.-P.: Hot Isostatic Pressing of IN718 Components Manufactured by Selective Laser Melting. Journal of Additive Manufacturing. Journal of Additive Manufacturing 13, S. 93-102, 2017. http://dx.doi.org/10.1016/j.addma.2016.11.006

Engelkemeier, K.; Grydin, O.; Schaper, M.: Structured zinc oxide powder materials: Synthesis and further investigations of their thermal morphological stability, Powder Technology, 2017, DOI: 10.1016/j.powtec.2017.06.031

Hengsbach, F.; Koppa, P.; Duschik, K.; Holzweissig, M.J.; Burns, M.; Nellesen, J.; Tillmann, W.; Tröster, T.; Hoyer, K.-P.; Schaper, M., Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties, Materials & Design 133, 2017, 136-142, doi.org/10.1016/j.matdes.2017.07.046

Grydin, O.; Stolbchenko, M.; Schaper, M.: Deformation zone length and plastic strain in twin-roll casting of strips of Al-Mg-Si alloy JOM 2017, Vol. 69 (12), P. 2648-2652. DOI: 10.1007/s11837-017-2593-2

Křivská, B.; Šlapáková, M.; Grydin, O.; Cieslar, M.: The microstructure evolution of Al-Mg-Sc-Zr alloy after deformation by equal channel angular pressing Manufacturing Technology 2017, Vol. 17 (5), S. 738-741.

Schmidt, H.C.; Grydin, O.; Stolbchenko, M.; Homberg, W.; Schaper, M.: Manufacturing of thin-walled clad tubes by pressure weldings of roll bonded sheets AIP Conference Proceedings 2017, Vol. 1896, 110003 DOI: 10.1063/1.5008130

Homberg, W.; Rostek, T.; Schaper, M.; Grydin, O.; Andreiev, A.; Brosius, A.; Tulke, M.: Development of hybrid directionally reinforced structural parts for lightweight applications AIP Conference Proceedings 2017, Vol. 1896, 050010 DOI: 10.1063/1.5008055

Grydin, O.; Stolbchenko, M.; Schaper, M.: Impact of steel substrate preheating on microstructure and properties of twin-roll cast aluminium-steel clad strips Procedia Engineering 2017, Vol. 207, P. 1695-1700. DOI: 10.1016/j.proeng.2017.10.924

Lossen, B.; Andreiev, A.; Homberg, W.; Schaper, M.: Friction-spinning-possibility of grain structure adjustment Procedia Engineering 2017, Vol. 207, P. 1749-1754. DOI: 10.1016/j.proeng.2017.10.933

Pai, A.; Niendorf, T.; Krooss, P.; Koke, I.; Traechtler, A.; Schaper, M.: Modelling the constitutive behaviour of martensite and austenite in shape memory alloys using closed-form analytical continuous equations In Smart Structures and Materials 2017, P. 41-66. DOI: 10.1007/978-3-319-44507-6_3

Křivská, B.; Šlapáková, M.; Bajer, J.; Grydin, O.; Cieslar, M. Rolled Al-Mg-Sc alloy studied by transmission electron microscopy Proc. of conf. Metal 2017 Brno 25th-26th May 2017. – P. 2-7.

Šlapáková, M.; Křivská, B.; Bajer, J.; Grydin, O.; Cieslar, M. Al-Mg-Sc Alloys processed by Equal-Channel Angular Pressing Proc. of conf. Metal 2017 Brno 25th-26th May 2017. – P. 8-13.