Veröffentlichungen
Steinmeier, P.; Hoyer, K.-P.; Lopes Dias, N.F.; Zielke, R.; Tillmann, W.; Schaper, M.: In Situ Alloying of Ti-6Al-7Nb with Copper Using Laser Powder Bed Fusion. Crystals 2025, 15, 1053. https://doi.org/10.3390/cryst15121053
Neuser, M.; Cichon, G.; Hoyer, K.-P.; Schaper, M.: Bildauswertendes Verfahren zur Evaluierung der Mikrostruktur von AlSi-Systemen. In: Werkstoffprüfung - 43. Vortrags- und Diskussionstagung Werkstoffprüfung, Vol 43. Deutsche Gesellschaft für Materialkunde (DGM); 2025, ISBN 978-3-88355-454-9
Ghosh, K.; Milaege, D.; Steinmeier, P.; Schaper, M.; Hoyer, K.-P.; Pramanik, S.: Effect of Strain Rate on the Deformation Behavior and Energy Absorption Characteristics of LPBF-Processed Ti2448 Microarchitectured Lattice Structures; Journal of Materials Engineering and Performance, 2025, https://doi.org/10.1007/s11665-025-11669-6
Kuşoğlu, I. M.; Garg, S.; Barcikowski, S.; et. al: “Large-Scale Interlaboratory Study Along the Entire Process Chain of Laser Powder Bed Fusion: Bridging Variability, Standards, and Optimization across Metals and Polymers”, Adv. Eng. Mater. 2025, 2402930, https://doi.org/10.1002/adem.202402930
Pramanik, S.; Milaege, D.; Andreiev, A.; Hoyer, K.-P.; Schaper, M.; Effect of Compression Rate and Pore Size Distribution on the Compression Behavior of Additively Manufactured Bio-inspired Fe3Si Microporous Material, Journal of Materials Engineering and Performance (2025), https://doi.org/10.1007/s11665-024-10618-z
Stratmann, I.; Hoyer, K.-P.; Schindler, C.; Developing a simplified linear-elastic material model for carbon paper applied in the rough rail-wheel contact, Journal of Tribology, ASME, Vol. 147 (2025), https://doi.org/10.1115/1.4067696
Braun, MPK.; Grydin, O.; Hoyer, K.-P.; Schaper, M.; Precipitation Hardening in the Magnesium–Zinc–Calcium Alloy System, TMS 2025. The Minerals, Metals & Materials (2025), https://doi.org/10.1007/978-3-031-81061-9_12
Neuser, M.; Holtkamp, P.; Hoyer, K.-P.; Kappe, F.; Yildiz, S.; Bobbert, M.; Meschut, G.; Schaper, M.; Mechanical properties and joinability of the near-eutectic aluminium casting alloy AlSi12, Proceedings of the Institution of Mechanical Engineers, Part L, Vol. 239 (2025), http://doi.org/10.1177/14644207251319922
Neuser, M.; Hoyer, K.-P.; Schaper, M.; Processing of the hypoeutectic AlSi9 alloy with twin-roll casting, Sheet Metal 2025,Materials Research Proceedings, Vol. 52 (2025), http://doi.org/10.1177/14644207251319922
Lauth, M.; Hoyer, K.-P.; Schaper, M.; Gräfen, W.; Cost-effective repair solution for twin-roll-caster rollers, Sheet Metal 2025,Materials Research Proceedings, Vol. 52 (2025), https://doi.org/10.21741/9781644903551-5
Neuser, M.; Schlichter, M. C.; Hoyer, K.-P.; Bobbert, M.; Meschut, G.; Schaper, M.; Mechanical joinability of microstructurally graded structural components manufactured from hypoeutectic aluminium casting alloys, IDDRG 2025, Matec Web of Science, Vol. 408 (2025), https://doi.org/10.1051/matecconf/202540801081
Milaege, D.; Eschemann, N.; Hoyer, K.-P.; Schaper, M.; Anisotropic Mechanical and Microstructural Properties of a Ti-6Al-7Nb Alloy for Biomedical Applications Manufactured via Laser Powder Bed Fusion, Crystals 14 (2024), https://doi.org/10.3390/cryst14020117
Tiefnig, R.; Haas, F.; Braun, M.; Taschauer, M.; Steinacker, S.: Process Development and Risk Assessment for Processing Magnesium Alloys using LPBF Technology, Metal Additive Manufacturing Conference, MAMC 2024, September 17-9, 2024, Aachen
Mallow, S., Broer, J., Milkereit, B., Grydin, O., Hoyer, K.-P., Garthe, K.-U., Milaege, D., Boyko, V., Schaper, M., Kessler, O.: Process chain of a twin‑roll cast aluminium‑copper‑lithium alloy, Prod. Eng. Res. Devel. (2024). https://doi.org/10.1007/s11740-024-01322-x
Borgert, T.; Neuser, M.; Wiens, E.; Grydin, O., Homberg, W.; Schaper, M.: Influence of thermo-mechanical joining process on the microstructure; SheMet 2023 Materials Research Proceedings
Pramanik, S.; Andreiev, A.; Hoyer, K.-P.; Krüger, J.T.; Hengsbach, F.; Kircheis, A.; Zhao, W.; Fischer-Bühner, J.; Schaper, M.; Powder Production via Atomisation and Subsequent Laser Powder Bed Fusion Pro-cessing of Fe+316L Steel Hybrid Alloy; Powders, MDPI Powders, 2023, 2, 59–75; https://doi.org/10.3390/powders2010005
Grydin, O.; Garthe, K.-U.; Yuan, X.; Broer, J.; Keßler, O.; Králík, R.; Cieslar, M.; Schaper, M.: Numerical and experimental investigation of twin-roll casting of aluminum-lithium strips. Light Metals 2023. TMS Series, Springer, 2023, P. 1031-1037. 10.1007/978-3-031-22532-1_137
Pramanik, S.; Hoyer, K.-P.; Schaper, M.: Experimental and finite element method investigation on the compression behaviour of FCCZ and BCC lattice structures of additively; Rapid Prototyping Journal: https://doi.org/10.1108/RPJ-06-2022-0190
Andreiev, A.; Hoyer, K.-P.; Hengsbach, F.; Haase, M.; Schaper, M.: Powder Bed Fusion of Soft-Magnetic Iron-Silicon-Based Alloys: Advantages and Challenges; Available at SSRN; http://dx.doi.org/10.2139/ssrn.4369485
Voswinkel, D.; Grydin, O.; Schaper, M.: Application of a new strategy for time-efficient laser treatment of galvanized steel substrates to improve the adhesion properties. Journal of Manufacturing Processes,2023, 94, P.10-19. 10.1016/j.jmapro.2023.03.056
Šlapáková, M.; Kihoulou, B.; Vesely, J.; Minarík, P.; Fekete, K.; Knapek, M.; Králík, R.; Grydin, O.; Stolbchenko, M.; Schaper, M.: 3D-structure of intermetallic interface layer in Al-steel clad material. Vacuum, 2023, Vol. 212, 112043. 2023, Vol. 212, 112043. 10.1016/j.vacuum.2023.112043
Haase, M.; Bieber, M.; Tasche, F.T.; Schaper, M.; Hoyer, K.-P.; Ponick, B.; Magyar, B.: Umsetzung einer optimierten Oberflächenschlitzung zur Wirbelstromverlustreduktion auf der Oberfläche eines additiv gefertigten Permanentmagnet-Rotors; Proceedings_of_the_19th_Rapid_Tech_3D_Conference Hanser Verlag ISBN: 978-446-47941-8
Neuser, M.; Schaper, M; Grydin, O.; Mechanical and microstructure characterisation of the hypoeutectic cast aluminium alloy AlSi10Mg manufactured by the twin-roll casting process; Manufacturing and Materials Processing; JMMP, 2023, Vol. 7, issue 4; 10.3390/jmmp7040132
Menge, D.; Milaege, D.; Hoyer, K.-P.; Schmid, H.-J.; Schaper, M.: Case Study IV: Individualized Medical Technology using Additive Manufacturing; Climate Protection, Resource Efficiency, and Sustainable Engineering, lona Horwath / Swetlana Schweizer (eds.) 17. August 2023, 250 Seiten, Transcript Science Studies, ISBN: 978-3-8376-6377-8; DOI: 10.14361/9783839463772-007
Grydin, O.; Neuser, M.; Schaper, M.: Influence of Shell Material on the Microstructure and Mechanical Properties of Twin-Roll Cast Al-Si-Mg Alloy; Conference: ICTP 2023: Proceedings of the 14th International Conference on the Technology of Plasticity; 10.1007/978-3-031-41341-4_61
Borgert, T.; Neuser, M.; Hoyer, K.-P.;Homberg, W.; Schaper, M.:Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates; Manufacturing and Materials Processing; JMMP, 2023, Vol. 7, issue 5; 10.3390/jmmp7050169
Pramanik, S.; Krüger, J.T.; Schaper, M.; Hoyer, K.-P.: Quasi-In Situ Localized Corrosion of an Additively Manufactured FeCo Alloy in 5 Wt Pct NaCl Solution; Metall Mater Trans A ; https://doi.org/10.1007/s11661-023-07186-7
Pramanik, S.; Milaege, D.; Hein, M.; Hoyer, K.-P.; Schaper, M.: Additive Manufacturing and Mechanical Properties of Auxetic and Non-Auxetic Ti24Nb4Zr8Sn Biomedical Stents- A Combined; Crystals, MDPI 13 (11), 1592; https://doi.org/10.3390/cryst13111592
Pramanik, S.; Milaege, D.; Hein, M.; Hoyer, K.-P.; Schaper, M.: Additive Manufacturing and Mechanical Properties of Auxetic and Non-Auxetic Ti24Nb4Zr8Sn Biomedical Stents- A Combined Experimental and Computational Modelling Approach; Advanced Engineering Materials Volume 25, issue 14; https://doi.org/10.1002/adem.202201850
Andreiev, A.; Hoyer, K.-P.; Hengsbach, F.; Haase, M.; Tasche, L.; Duschik, K.; Schaper, M.: Powder bed fusion of soft-magnetic iron-based alloys with high silicon content; Journal of Materials Processing Technology Volume 317; https://doi.org/10.1016/j.jmatprotec.2023.117991
Hein, M.; Kokalj, D.; Lopes Dias, N. F.; Stangier, D.; Oltmanns, H.; Pramanik, S.; Kietzmann, M.; Hoyer, K.-P.; Meißner, J.; Tillmann, W.; Schaper, M.: Low Cycle Fatigue Performance of Additively Processed and Heat-Treated Ti-6Al-7Nb Alloy for Biomedical Applications Metals, MDPI Metals 2022, 12(1), 122 https://doi.org/10.3390/met12010122
Westermann, H.; Reitz, A.; Mahnken, R.; Schaper, M.; Grydin, O.: Microstructure transformations in a press hardening steel during tailored thermo-mechanical processing.Steel Research International, 2022. Vol. 93 (1), 2100346 DOI: 10.1002/srin.202100346
Neuser, M.; Grydin, O.; Frolov, Y.; Schaper, M.: Influence of solidification rates and heat treatment on the mechanical performance and joinability of the cast aluminium alloy AlSi10Mg. Production Engineering, 2022 DOI: 0.1007/s11740-022-01106-1
Reitz, A., Grydin, O.; Schaper, M.: Influence of thermo-mechanical processing on the microstructural and mechanical properties of steel 22MnB5. Materials Science and Engineering A, 2022, 142780 DOI: 10.1016/j.msea.2022.142780
Neuser, M.; Böhnke, M.; Grydin, O.; Bobbert, M.; Schaper, M.; Meschut, G.: Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2022 DOI: 0.1177/14644207221075838
Grydin, O.; Mortensen, D.; Neuser, M.; Lindholm, D.; Fjær, H.G.; Schaper, M.: Numerical and experimental investigation of heat transfer in the solidification-deformation zone during twin-roll casting of aluminum strips. Light Metals 2022, TMS Series, Springer, 2022, P. 728-734. DOI: 10.1007/978-3-030-92529-1_96
Huang, J.; Orive, A. G.; Krüger, J. T.; Hoyer, K.-P.; Keller, A.; Grundmeier, G.: Influence of proteins on the corrosion of a conventional and selective laser beam melted FeMn alloy in physiological electrolytes, Corrosion Science Volume 200, 15 May 2022, 110186 doi.org/10.1016/j.corsci.2022.110186
Pramanik, S.; Tasche, F.; Hoyer, K.-P.; Schaper, M.: Orientation-Dependent Indentation Behaviour of Additively Manufactured FeCo Sample: A Quasi In-Situ Study Magnetism, MDPI Magnetism 2022, 2, 88–104 https://doi.org/10.3390/magnetism2020007
Tillmann, W.; Lopes Dias, N. F.; Kokalj, D.; Stangier, D.; Hein, M.; Hoyer, K.-P.; Schaper, M.; Gödecke, D.; Oltmanns, H.; Meißner, J.: Tribo-functional PVD thin films deposited onto additively manufactured Ti6Al7Nb for biomedical applications, Materials Letters 132384, https://doi.org/10.1016/j.matlet.2022.132384
Teng, Z.; Wu, H.; Pramanik, S.; Hoyer, K.-P.; Schaper, M.; Zhang, H.; Boller, C.; Starke, P.: Characterization and Analysis of Plastic Instability in an Ultrafine-Grained Medium Mn TRIP Steel, Advanced Engineering Materials Adv. Eng. Mater. 2022, 2200022 https://doi.org/10.1002/adem.202200022
Kupfer, R.; Köhler, D.; Röhmisch, D.; Wituschek, S.; Ewenz, L.; Kalich, J.; Weiß, D.; Sadeghian, B; Busch, M.; Krüger, J.; Neuser, M.; Grydin, O.; Böhnke, M.; Bielak, C.-R.; Troschitz, J.: Clinching of aluminum materials – methods for the continuous characterization of process, microstructure and properties. Journal of Advanced Joining Processes,2022, 100108. DOI: 10.1016/j.jajp.2022.100108
Šlapáková, M.; Křivská, B.; Fekete, K.; Králík, R.; Grydin, O.; Stolbchenko, M.; Schaper, M.: The influence of surface on direction of diffusion in Al-Fe clad material. Materials Characterization, 2022, 112005. DOI: 10.1016/j.matchar.2022.112005
Abdelaal, O.; Hengsbach, F.; Schaper, M.; Hoyer, K.-P.: LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio, Materials, MDPI 2022, 15, 4072, https://doi.org/10.3390/ma15124072
Reitz, A., Grydin, O.; Schaper, M.: Optical detection of phase transformations in steels: an innovative method for time-efficient material characterization during tailored thermo-mechanical processing of a press hardening steel. Metallurgical and Materials Transactions A, 2022, DOI: 10.1007/s11661-022-06732-z
Krüger, J.T.; Hoyer, K.-P.; Hengsbach, F.; Schaper, M.: Formation of insoluble silver-phases in an iron-manganese matrix for bioresorbable implants using varying laser beam melting strategies. Journal of Materials Research and Technology 2022. 19, 2369-2387 https://doi.org/10.1016/j.jmrt.2022.06.006
Neuser, M.; Kappe, F.; Ostermeier, J.; Krüger, J. K.; Bobbert, M.; Meschut, G.; Schaper, M.: Mechanical properties and joinability of AlSi9 alloy manufactured by twin-roll casting. Advanced Engineering Materials, 2022. https://doi.org/10.1002/adem.202200874
Pramanik, S.; Milaege, D.; Hoyer, K.-P.; Schaper, M.: Additively manufactured novel Ti6Al7Nb circular honeycomb cellular solid for energy absorbing applications Materials Science and Engineering: A Volume 854, 27 September 2022, 143887 https://doi.org/10.1016/j.msea.2022.143887
Hein, M.; Lopes Dias, N. F.; Kokalj, D.; Stangier, D.; Hoyer, K.-P.; Tillmann, W.; Schaper, M.: On the influence of physical vapor deposited thin coatings on the low-cycle fatigue behavior of additively processed Ti-6Al-7Nb alloy, International Journal of Fatigue 166 (2023) 107235, https://doi.org/10.1016/j.ijfatigue.2022.107235
Neuser, M.; Kappe, F.; Ostermeier, J.; Krüger, J. K.;Mechanical properties and joinability of AlSi9 alloy.
manufactured by twin-roll casting, Advanced Engineering: 2022, 2200874. DOI: 10.1002/adem.202200874
Krüger, J. T.; Hoyer, K.-P.; Schaper, M.: Bioresorbable AgCe and AgCeLa alloys for adapted Fe-based implants, Materials Letters, 2022, Volume 306, 130890, https://doi.org/10.1016/j.matlet.2021.130890
A.A.Camberg, A.Andreiev, S.Pramanik, K.-P.Hoyer, T.Tröster, M.Schaper: Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks, Materials Science and Engineering A,2022, Volume 831, 142312. https://doi.org/10.1016/j.msea.2021.142312
Garthe, K.-U.; Hoyer, K.-P.; Hagen, L.; Tillmann, W.; Schaper, M.: Correlation between pre- and post-treatments of additively manufactured 316L parts and the resulting low cycle fatigue behavior, Rapid Prototyping Journal, 2022, Vol. 28(5), P. 833-840. https://doi.org/10.1108/RPJ-01-2021-0017
Krüger, J.T.: Adjustment of AgCaLa Phases in a FeMn Matrix via LBM for Implants with Adapted Degradation, Crystals 2022, Volume 12, 1146, https://doi.org/10.3390/cryst12081146
Krüger, J.T.; Hoyer, K.-P.; Andreiev, A; Schaper, M.; Zinn, C.: Modification of iron with degradable silver phases processed via LBM for implants with adapted degradation rate, Advanced Engineering Materials 2022, 2201008, https://doi.org/10.1002/adem.202201008
M. Schneider, D. Bettge, M. Binder, K. Dollmeier, M. Dreyer, K. Hilgenberg, B. Klöden, T. Schlingmann, J. Schmidt: Reproducibility and Scattering in Additive Manufacturing: Results from a Round Robin on PBF-LB/M AlSi10Mg Alloy; Practical Metallography 59, 10; https://doi.org/10.1515/pm-2022-1018
Krüger, J.T.; Hoyer, K.-P.; Huang, J.; Filor, V.; Mateus-Vargas, R.H.; Oltmanns, H.; Meißner, J.; Grundmeier, G.; Schaper, M.: FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability; Journal of Functional Biomaterials 2022, 13(4), 185 https://doi.org/10.1002/adem.202201008
Kessler, O.;Zhuravlev, E.; Wenner, S.; Heiland , S.; Schaper, M.: Correlation between Differential Fast Scanning Calorimetry and Additive Manufacturing Results of Aluminium Alloys; Materials, MDPI 2022, 15, 7195; doi.org/10.3390/ ma15207195
Kusoglu, I.M.; Vieth, P.; Heiland, S.; Huber, S.; Lüddecke, A.; Zierfuss, A.R.; Kwade, A.; Schmidt, M.; Schaper, M.; Barcikowski, S.; Grundmeier, G.: Microstructure and corrosion properties of PBF-LB produced carbide nanoparticles additivated AlSi10Mg parts; Procedia CIRP Volume 111, 2022, Pages 10-13; https://doi.org/10.1016/j.procir.2022.08.046
Voswinkel, D.; Striewe, J.; Grydin, O.; Meinderink, D.; Grundmeier, G.; Schaper, M.; Tröster, T.: Co-bonding of carbon fibre-reinforced epoxy and galvanised steel with laser structured interface for automotive applications. Advanced Composite Materials, DOI: 0.1080/09243046.2022.2143746
Cieslar, M.; Krivská, B.; Králík, R.; Bajtošová, L.; Grydin, O.; Stolbchenko, M.; Schaper, M.: Homogenization of twin-roll cast Al-Li-based alloy studied by in-situ electron microscopy. Proc. of conf. Metal 2022, Brno, 18th-19th May 2022, P. 593-598. DOI: 10.37904/metal.2022.4438
Bajtošová, L.; Grydin, O.; Stolbchenko, M.; Schaper, M.; Krivská, B.; Králík, R.; Šlapáková, M.; Cieslar, M.: Phase identification in twin-roll cast Al-Li alloys. Proc. of conf. Metal 2022, Brno, 18th-19th May 2022, P. 587-592. DOI: 10.37904/metal.2022.4437
Pramanik, S.; Milaege, D.; Hoyer, K.-P.; Schaper, M.: Additively Manufactured Nested and Non-Nested Cellular Solids for Effective Stress Distribution and Thermal Insulation Applications: An Experimental and Finite Element Analysis Study; crystals Crystals 2022, 12, 1217; https://doi.org/10.3390/cryst12091217
Voswinkel, D.; Kloidt, D.; Grydin, O.; Schaper, M.: Time efficient laser modification of steel surface for advanced bonding in hybrid materials. Production Engineering, 2021, Vol. 15(2), P. 263-270. DOI: 10.1007/s11740-020-01006-2
Krüger, J. T.; Hoyer, K.-P.; Filor, V.; Pramanik, S.; Kietzmann, M.; Meißner, J.; Schaper, M.: Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation. Journal of Alloys and Compounds Available online 19 March 2021, 159544 https://doi.org/10.1016/j.jallcom.2021.159544
Andreiev, A.; Hoyer, K.-P.; Dula, D.; Hengsbach, F.; Haase, M.; Gierse, J.; Zimmer, D.; Tröster, T.; Schaper, M.: Soft-magnetic behavior of laser beam melted FeSi3 alloy with graded cross-section. Journal of Materials Processing Technology v 296, October 2021, 117183, Available online 24 April 2021, doi.org/10.1016/j.jmatprotec.2021.117183
Engelkemeier, K.; Sun, A.; Voswinkel, D.; Grydin, O.; Schaper, M.; Bremser, W.: Zinc anodizing: structural diversity of anodic oxide layers controlled by the type of electrolyte. ChemElectroChem, 2021, Vol. 8. P. 1-15. DOI: 10.1002/celc.202100216.
Pramanik, S.; Tasche, L.; Hoyer, K.-P.; Schaper, M. Investigating the microstructure of an additively manufactured FeCo alloy: an elec-tron microscopy study. Additive Manufacturing, Available online 5 June 2021, 102087 https://doi.org/10.1016/j.addma.2021.102087
Tillmann, W.; Lopes Dias, N. F.; Franke, C.; Kokalj, D.; Stangier, D.; Filor, V.; Mateus-Vargas, R. H.; Oltmanns, H.; Kietzmann, M.; Meißner, J.; Hein, M.; Pramanik, S.; Hoyer, K.-P.; Schaper, M.; Nienhaus, A.; Thomann, C. A.; Debus, J.: Tribo-mechanical properties and biocompatibility of Ag-containing amorphous car-bon films deposited onto Ti6Al4V Surface and Coatings Technology, Available online 6 June 2021, 127384 https://doi.org/10.1016/j.surfcoat.2021.127384
Neuser, M.; Kappe, F.; Busch, M.; Grydin, O.; Bobbert, M.; Schaper, M.; Meschut, G.; Hausotte, T.: Joining suitability of cast aluminium for self-piercing riveting. IOP Conference Series: Materials Science and Engineering, 2021, Vol. 1157, 012005. DOI: 10.1088/1757-899X/1157/1/012005
Andreiev, A.; Hoyer, K.-P.; Dula, D.; Hengsbach, F.; Grydin, O.; Frolov, Y.; Schaper, M.: Laser beam melting of functionally graded materials with application-adapted tailoring of magnetic and mechanical performance, Volume 822, 3 August 2021, 141662 https://doi.org/10.1016/j.msea.2021.141662
Hein, M.; Hoyer, K.-P.; Schaper, M.: Additively Processed TiAl6Nb7 Alloy for Biomedical Applications, Materialwissenschaft und Werkstofftechnik, 52, 703–716, 2021, https://doi.org/10.1002/mawe.202000288
Neuser, M.; Grydin, O.; Andreiev, A.; Schaper, M.: Effect of solidification rates at sand casting on the mechanical joinability of a cast aluminium alloy. Metals, 2021, Vol. 11, 1304. https://doi.org/10.3390/ met11081304
Pramanik, S.; Andreiev, A..; Hoyer, K.-P.; Schaper, M. Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy, International Journal of Fatigue, Volume 153, December 2021, 106498, https://doi.org/10.1016/j.ijfatigue.2021.106498
Westermann, H.; Reitz, A.; Mahnken, R.; Schaper, M.; Grydin, O.: Microstructure transformations in a press hardening steel during tailored thermo-mechanical processing. Steel Research International, 2021. DOI: 10.1002/srin.202100346
Pramanik, S.; Tasche, L.; Hoyer, K.-P.; Schaper, M.: Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy Journal of Materials Engineering and Performance 2021 https://doi.org/10.1007/s11665-021-06065-9
Krüger, J. T.; Hoyer, K.-P.; Schaper, M.: Bioresorbable AgCe and AgCeLa alloys for adapted Fe-based implants, Materials Letters, Volume 306, 1 January 2022, 130890 https://doi.org/10.1016/j.matlet.2021.130890
Krivská, B.; Šlapáková, M.; Králík, R.; Bajtošová, L.; Cieslar, M.; Stolbchenko, M.; Grydin, O.; Schaper, M.: Resistivity and formation of intermetallic layer in aluminum-steel clad strip. IOP Conference Series: Materials Science and Engineering, 2021, Vol. 1178, 012035. DOI: 10.1088/1757-899X/1178/1/012035
Voswinkel, D.; Sapli, H.; Kloidt, D.; Heggemann, T.; Homberg, W.; Grydin, O.; Schaper, M.: Improving the accuracy of deep drawn fiber-metal laminate parts by preliminary surface treatment. IOP Conference Series: Materials Science and Engineering, 2021, Vol. 1190, 012028. DOI: 10.1088/1757-899X/1190/1/012028
Křivská, B.; Šlapáková, M.; Minárik, P.; Fekete, K.; Králík, R.; Stolbchenko, M.; Schaper, M.; Grydin, O.: In-situ TEM observation of intermetallic phase growth in Al-steel clad sheet. AIP Conference Proceedings, 2021, Vol. 2411, 030005. DOI: 10.1063/5.0067491
A.A.Camberg, A.Andreiev, S.Pramanik, K.-P.Hoyer, T.Tröster, M.Schaper: Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks, Materials Science and Engineering: A,142312 https://doi.org/10.1016/j.msea.2021.142312
Garthe, K.-U.; Hoyer, K.-P.; Hagen, L.; Tillmann, W.; Schaper, M.: Correlation between pre- and post-treatments of additively manufactured 316L parts and the resulting low cycle fatigue behavior, Rapid Prototyping Journal, ISSN: 1355-2546; Article publication date: 16 November 2021 https://doi.org/10.1108/RPJ-01-2021-0017
Heiland, S.; Milkereit, B.; Hoyer, K.-P.; Zhuravlev, E.; Keßler, O.; Schaper. M.: Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts, Metals, Materials 2021, 14, 7190. https://doi.org/10.3390/ma14237190
Triebus, M.; Reitz, A.; Grydin, O.; Grenz, J.; Schneidt, A, Erhardt, R.; Tröster, T.; Schaper, M.: Forming simulation of tailored press hardened parts. Proc. 13th European LS-Dyna Conference, 2021, P. 1-10.
Cieslar, M.; Králík, R.; Bajtošová, L.; Křivská, B.; Hájek, M.; Belejová, S.; Grydin, O.; Stolbchenko, M.; Schaper, M.: High temperature annealing of twin-roll cast Al-Li-based alloy studied by in-situ SEM and STEM. Microscopy and Microanalysis, 2021, Vol. 27 (S2), P. 79-80. 10.1017/S1431927621013398
Křivská, B.; Šlapáková, M.; Minárik, P.; Fekete, K.; Králík, R.; Stolbchenko, M.; Schaper, M.; Grydin, O.: Intermetallic phase growth in Al-steel clad strip during in-situ heating in TEM. Microscopy and Microanalysis, 2021, Vol. 27 (S2), P. 91-92. 10.1017/S1431927621013453
Westermann H., Reitz A., Mahnken R., Grydin O., Schaper M.: Constitutive modeling of viscoplasticity including phase transformations for graded thermo-mechanical processing. Proceedings in Applied Mathematics and Mechanics, 2021, Vol. 21 (1), e202100041. 10.1002/pamm.202100041
Křivská, B.; Šlapáková, M.; Veselý, J.; Kihoulou, M.; Fekete, K.; Minárik, P.; Králík, R.; Grydin, O.; Stolbchenko, M.; Schaper, M.: Intermetallic phases identification and diffusion simulation in twin-roll cast Al-Fe clad sheet. Materials, 2021, Vol. 14, 7771. 10.3390/ma14247771
Reitz, A.; Grydin, O.; Schaper, M.: Phase transformation characterization by means of high temperature digital image correlation for graded thermo-mechanical processing of steel sheet parts. Characterization of Minerals, Metals, and Materials 2020. TMS Series, Springer, Cham, 2020. – P. 69-79. DOI: 10.1007/978-3-030-36628-5_7
Grydin, O.; Stolbchenko, M.; Schaper, M.: Influence of nozzle shape on near-surface segregation formation during twin-roll casting of aluminum strips. Light Metals 2020. TMS Series, Springer, 2020. – P. 1039-1044. DOI: 10.1007/978-3-030-36408-3_141
Bondarenko, S.; Grydin, O.; Frolov, Y.; Kuzmina, O.; Bobukh, O.: Cold rolling of pre-profiled strips from aluminum alloy EN AW-1050. Modern Problems of Metallurgy – Scientific Bulletin, 2020, Vol. 23, P. 91-101.
Grydin, O.; Matzelt, M.; Andreiev, A.; Frolov, Y.; Schaper, M.: Influence of microstructure in near-surface areas of feedstocks on the bond strength of roll bonded aluminum clads. Advanced Engineering Materials, 2020. DOI: 10.1002/adem.202000130
A. Andreiev, K.-P. Hoyer, O. Grydin, Y. Frolov, M. Schaper Degradable silver-based alloys Materialwissenschaft & Werkstofftechnik 2020, 51, 517–530 DOI 10.1002/mawe.201900191
W. Tillmann, N. F. Lopes Dias, D. Stangier, L. Hagen, M. Schaper, F. Hengsbach, K.-P. Hoyer Tribo-Mechanical Properties and Adhesion Behavior of DLC Coatings Sputtered onto 36NiCrMo16 Produced by Selective Laser Melting Surface & Coatings Technology Volume 394, 25 July 2020, 125748 https://doi.org/10.1016/j.surfcoat.2020.125748
Stolbchenko, M.; Frolov, Ya.; Makeieva, H.; Grydin, O.; Tershakovec, M.; Schaper, M.: The mechanical properties of rolled wire-reinforced aluminum composites at different strain values. Mechanics of Advanced Materials and Structures, 2020, Vol. 27 (18), P. 1599-1608. DOI: 10.1080/15376494.2018.1520941
Reitz, A.; Grydin, O.; Schaper, M.: Characterization of phase transformations during graded thermo-mechanical treatment of steel 22MnB5 by means of optical methods Proc. MEFORM 2020 "Materials Data for Smart Forming Technologies", ACATRAIN e.V., Freiberg, 2020, P. 17-19.
Grydin, O.; Stolbchenko, M.; Schaper, M.; Belejová, S.; Králík, R.; Bajtošová, L.; Křivská, B.; Hájek, M.; Cieslar, M.: New twin-roll cast Al-Li based alloys for high-strength applications. Metals, 2020, Vol. 10(8), 943. DOI: 10.3390/met10080987
Wu, H.; Bill, T.; Teng, Z.J.; Pramanik, S.; Hoyer, K.-P.; Schaper, M.; Starke, P Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations Materials Science and Engineering: A Volume 794, 2020 DOI: 10.1016/j.msea.2020.139597
Stolbchenko, M.; Makeieva, H.; Grydin, O.; Frolov, Ya.; Schaper, M.: Strain parameters at hot rolling of aluminum strips reinforced with steel netting. Journal of Sandwich Structures and Materials, 2020, Vol. 22 (6), P. 1999-2029. DOI: 10.1177/1099636218792539
Tillmann, W.; Hagen, L.; Schaak, C.; Liß, J.; Schaper, M.; Hoyer, K.-P.; Aydinöz, M. E.; Garthe, K.-U. Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM Journal of Thermal Spray Technology 2020 https://doi.org/10.1007/s11666-020-01081-y
Frolov, Y.; Haranich, Y.; Bobukh, O.; Remez, O.; Voswinkel, D.; Grydin, O.: Deformation of expanded steel mesh inlay inside aluminum matrix during the roll bonding. Journal of Manufacturing Processes, 2020, Vol. 58, P. 857-867. DOI: 10.1016/j.jmapro.2020.08.049
Reitz, A.; Grydin, O.; Schaper, M.: Characterization of phase transformations during graded thermo-mechanical processing of press-hardening sheet steel 22MnB5. Metallurgical and Materials Transactions A, 2020. DOI: 10.1007/s11661-020-05976-x
Tillmann, W.; Hagen, L.; Garthe, K.U.; Hoyer, K.-P.; Schaper, M. "Effect of substrate pre-treatment on the low cycle fatigue performance of tungsten carbide-cobalt coated additive manufactured 316 L substrates" Materialwiss. Werkstofftech 2020, 51, 1-14 DOI 10.1002/mawe.202000109
Křivská, B.; Šlapáková, M.; Grydin, O.; Cieslar, M.: Aluminum-steel clad material prepared by twin-roll casting. Proc. of conf. Metal 2020, Brno, 20th-22nd May 2020. - P. 989-993. DOI: 10.37904/metal.2020.3595
Bondarenko, S.; Grydin, O.; Oginskiy, Yo.; Kuzmina, O.; Frolov, Ya.: Device for twin-roll casting of strips with profiled cross-section. Theoriya i praktyka metallurgii, 2020, Vol. 1, P. 44-50. DOI: 10.34185/tpm.1.2020.06
Krivská, B.; Šlapáková, M.; Kihoulou, M.; Králík, R.; Bajtošová, L.; Cieslar, M.; Grydin, O.; Stolbchenko, M.; Schaper, M.: Interdiffusion in aluminum-steel clad strip. Proc. 20th Conference of Czech and Slovak Physicists, 2020, P. 153-154.
Grydin, O.; Andreiev, A.; Sotirov, N.; Stolbchenko, M.; Behr, T.M.; Ashkelianets, A.; Frolov, Ia.; Schaper, M.: Water quenching of hot-rolled aluminum strips: Process integrated heat treatment of the alloy EN AW-6082. JOM, 2019, Vol. 71 (1). - P. 407-418. 2019 DOI: 10.1007/s11837-018-3144-1
Grydin, O.; Andreiev, A.; Holzweißig, M.-J.; Rüsing, C.; Duschik, K.; Frolov, Ya.; Schaper, M.: Short austenitization treatment with subsequent press hardening: correlation between process parameters, microstructure and mechanical properties. Materials Science and Engineering A, 2019, Vol. 749, P. 176-195. DOI: 10.1016/j.msea.2019.02.025
Cieslar, M.; Křivskǎ, B.; Šlapǎkovǎ, M.; Bajer, J.; Grydin, O.; Stolbchenko, M.: The influence of foils thickness on recrystallized structure observed during in-situ heating of AlMgScZr alloy. Microscopy and Microanalysis, 2019, Vol. 25(S1), P. 65-66. DOI: 10.1017/S1431927618016057
Stolbchenko, M.; Frolov, Ya.; Makeieva, H.; Grydin, O.; Tershakovec, M.; Schaper, M.: The mechanical properties of rolled wire-reinforced aluminum composites at different strain values. Mechanics of Advanced Materials and Structures, 2019 DOI: 10.1080/15376494.2018.1520941
Grydin, O.; Sotirov, N.; Samsonenko, A.; Biba, N.; Andreiev, A., Stolbchenko, M.; Behr, T.-M.; Frolov, Ya.; Schaper, M.: Flexible hot rolling of extruded shapes of aluminum alloy EN AW-6082. Materials Science Forum, 2019, Vol. 949, P. 85-92. DOI: 10.4028/www.scientific.net/MSF.949.85
Hoyer, K.-P.; Schaper, M. Alloy Design for Biomedical Applications in Additive Manufacturing TMS2019 TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings, 475-484 DOI 978-3-030-05861-6_44
Tasche, L.; Hoyer, K.-P.; Zhuravlev, E.; Grundmeier, G.; Schaper, M.; Keßler, O. Surface Inoculation of Aluminium Powders for Additive Manufacturing Guided by Differential Fast Scanning Calorimetry TMS2019 TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings, 485-493
Stolbchenko, M.; Grydin, O.; Schaper, M.: Manufacturing and characterization of twin-roll cast aluminum-steel clad strips. Advanced Engineering Materials, 2019, Vol. 21(4), P. 1-10. DOI: 10.1002/adem.201800454
Serna, J.; Zinn, C.; Scharf, I.; Dittes, A.; Schwoebel, S.-D.; Schmidt, C.; Meiners, D.; Schaper, M.; Lampke, T.: Concepts for interface engineering and characterization in composite hybrid structures. IOP Conference Series: Materials Science and Engineering, 2019, Vol. 480, 012014. DOI: 10.1088/1757-899X/480/1/012014
Grydin, O.; Andreiev, A.; Zogaj, M.; Frolov, Ya.; Schaper, M.: Relationships between microstructural and mechanical performance on example of an air-hardening steel. Advanced Engineering Materials, 2019 DOI: 10.1002/adem.201900134
Frolov, Ya.; Stolbchenko, M.; Grydin, O.; Makeieva, H.; Tershakovec, M.A.; Schaper, M.: Influence of strain parameters at rolling on the properties of wire-reinforced aluminium composites. International Journal of Material Forming, 2019, Vol. 12 (4), P. 505-518 DOI: 10.1007/s12289-018-1431-6
Christoph Lohr *, Markus Muth, Ralf Dreher, Carolin Zinn, Peter Elsner, Kay André Weidenmann Polymer-Steel-Sandwich-Structures: Influence of Process Parameters on the Composite Strength Key Engineering Materials Vol. 809, pp. 266-273 doi.org/10.4028/www.scientific.net/KEM.809.266
Engelkemeier, K.; Lindner, J. K. N.; Bürger, J.; Vaupel, K.; Hartmann, M.; Tiemann, M.; Hoyer, K.-P.; Schaper, M. Nano-architectural complexity of zinc oxide nanowall hollow microspheres and their structural properties nanotechnology online 8.11.2019
Haranich, Y. Frolov, Y., Grydin O., Voswinkel, D., Andreiev, A., Remez, O.: Failure mode of reinforcing steel mesh in aluminum roll bonded composite material. Theory and Praxis of Metallurgy, 2019, Vol. 1, P. 29-34. DOI: 10.34185/tpm.1.2019.03
Fabian Bader, Florian Hengsbach, Kay-Peter Hoyer, Werner Homberg, Mirko Schaper IntrinsicallyLubricated Tool Insertsfor Deep Drawing Applications Generated by Selective Laser Melting AIP Conference Proceedings https://doi.org/10.1063/1.511272
Garthe, K.-U.; Hoyer, K.-P.; Hagen, L.; Tillmann, W.; Schaper, M. Einfluss von Eigenspannungen und Oberflächenrauheit additiv gefertigter Komponenten aus 316L auf die Beschichtbarkeit und Ermüdungsfestigkeit 4. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen, Berlin, 2019
Demler, E.; Rodman, D.; Rodman, M.; Gerstein, G.; Grydin, O.; Briukhanov, A.A.; Klose, C.; Nürnberger, F.; Maier, H.J.: The influence of alternating low-cycle bending loads on sheet properties having an hcp crystal lattice. Journal of Materials Engineering and Performance, 2018 (27), Vol. 2. - P. 541-549. DOI: 10.1007/s11665-018-3123-2
Stolbchenko, M.; Grydin, O.; Schaper, M. Influence of the surface roughness on the bonding quality in twin-roll cast clad strip Materials and Manufacturing Processes 2018 (33), Vol. 7. - P. 727-734. DOI: 10.1080/10426914.2017.1317788
Stolbchenko, M.; Makeieva, H.; Grydin, O.; Frolov, Ya.V.; Schaper, M.: Roll bonding of steel net-reinforced aluminium strips. Materials Research, 2018 (21), Vol.2. DOI: 10.1590/1980-5373-MR-2017-0941
Andreiev, A.; Schaper, M.; Grydin, O.; Holzweißig, M.; Rüsing, C.: Umweltfreundlicher Leichtbau mit Stahl: Eine innovative und energieeffiziente Verarbeitungsmethode für sicherheitsrelevante Bauteile im Auto. In Wissenschaft im Angesicht „Großer Gesellschaftlicher Herausforderungen“. Das Beispiel der Forschung an hybriden Leichtbaumaterialien. Ed. by B. Riegraf, A.-L. Berscheid. [transcript] ScienceStudies, Bielefeld, 2018, S. 179-196. ISBN 978-3-8376-4099-1.
Gülseren, B.; Bychkov, O.; Frolov, Ia.; Schaper, M.; Grydin, O.: Sinking of ultra-thick-walled double-layered aluminium tubes. Archives of Metallurgy and Materials, 2018 (63), Vol. 1. - P. 365-370. 10.24425/118949
Šlapáková, M.; Křivská, B.; Grydin, O.; Cieslar, M. The influence of casting methods on microstructure of Al-Mg-Sc-Zr alloy. Manufacturing Technology, 2018 (18), Vol. 1. - P. 130-134.
Grydin, O.; Stolbchenko, M.; Bauer, M.; Schaper, M.: Asymmetric twin-roll casting of an Al-Mg-Si alloy. Materials Science Forum, 2018, Vol. 918. – P. 48-53. 10.4028/www.scientific.net/MSF.918.48
Bondarenko, S.; Stolbchenko, M.; Schaper, M.; Grydin, O.: Numerical analysis of twin-roll casting of strips with profiled cross-section. Materials Research, 2018 (21), Vol. 4. DOI: 10.1590/1980-5373-MR-2017-1098
Camberg, A.A.; Engelkemeier, K.; Dietrich, J.; Heggemann, T.: Top-down design of tailored fiber-metal laminates. Lightweight.Design, 2018. - Vol. 2. - P. 24-28.
Hengsbach, F.; Koppa, P.; Hoyer, K.-P.; Aydinöz, M.E.; Taube, A.; Tröster, T.; Schaper, M. Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers. Progress in Additive Manufacturing, online 10.05.2018 DOI: 10.1007/s40964-018-0044-4
Andreiev, A.; Schaper, M.; Grydin, O.: Implementierung einer Kurzzeitaustenitisierung in Presshärteprozesse. ILH Insight, Ausgabe 2016-2017. - P. 24-27.
Homberg, W.; Rostek, T.; Schaper, M.; Grydin, O.; Andreiev, A.; Brosius, A.; Tulke, M.: Hybride Verbundstrukturen aus Aluminium und Titan für Leichtbauanwendungen. ILH Insight, Ausgabe 2016-2017. - P. 28-33.
Bondarenko, S.; Grydin, O.; Schaper, M.: Influence of cold rolling in flat rolls on the mechanical properties of pre-profiled strips of an EN AW-6082 aluminum alloy. Materials working by pressure, 2018 (46), Vol. 1. - P. 143-148. (in Russian)
Zinn, C.; Bobbert, M.; Dammann, C.; Wang, Z.; Tröster, T.; Mahnken, R.; Meschut, G.; Schaper, M.: Shear strength and failure behaviour of laser nano-structured and conventionally pre-treated interfaces in intrinsically manufactured CFRP-steel hybrids. Composites Part B: Engineering, 2018, Vol. 151.- P. 173-185. DOI: 10.1016/j.compositesb.2018.05.030
Togobytska, D.N.; Schaper, M.; Grydin, O.; Levin, B.A.; Snigura, I.R.: Computer modelling of liquidus and solidus temperatures of steels and alloys for special applications. Stahl, 2018, Vol. 6. - P. 11-15. (in Russian)
Lossen, B.; Andreiev, A.; Stolbchenko, M.; Homberg, W.; Schaper, M.: Friction-spinning - Grain structure modification and the impact on stress/strain behaviour. Journal of Materials Processing Technology, 2018, Vol 261. - P. 242-250. DOI: 10.1016/j.jmatprotec.2018.06.015
Stolbchenko, M.; Grydin, O.; Schaper, M.: Manufacturing and characterization of twin-roll cast aluminum-steel clad strips. Advanced Engineering Materials, 2018 DOI: 10.1002/adem.201800454
Urbanek, S.; Ponick, B.; Taube, A.; Hoyer, K.-P.; Schaper, M.; Lammers, S.; Lieneke, T.; Zimmer, D. Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine Conference paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC) 2018 DOI: 10.1109/ITEC.2018.8450250
Cieslar, M.; Bajer, J.; Slapakova, M.; Krivska, B.; Zimina, M.; Stolbchenko, M.; Grydin, O.: The influence of annealing on microstructure and microhardness of twin-roll cast Al-Mg-Sc-Zr alloy. Acta Physica Polonica A, 2018, Vol. 134. - P. 145-149. DOI: 10.12693/APhysPolA.134.145
Bajtošovǎ, L.; Šlapǎkovǎ, M.; Bajer, J.; Křivskǎ, B.; Grydin, O.; Stolbchenko, M.; Zaunschirm, S.; Kastner, J.; Cieslar, M.: Impurities segregation in twin-roll cast Al-Mg-Sc-Zr material. Proc. of conf. Metal 2018, Brno, 23rd-25th May 2018. - P. 1455-1459.
Křivskǎ, B.; Šlapǎkovǎ, M.; Bajer, J.; Grydin, O.; Stolbchenko, M.; Cieslar, M.: The influence of Al-Mg-Sc-Zr strips preparation on microhardness during annealing at elevated temperatures. Proc. of conf. Metal 2018, Brno, 23rd-25th May 2018. - P. 1593-1598.
Engelkemeier, K.; Hoyer, K.-P.; Schaper, M. Influence of sp3/sp2-carbon ratio of vertically standing carbon nanostructures pro-duced by pulsed laser-treatment on PAN-based carbon fibers Material Letters Material Letters, v236, 752-756, 2018
Engelkemeier, K.; Mücke, C. Hoyer, K.-P.; Schaper, M. Anodizing of electrolytically galvanized steel surfaces for improved interface properties in fiber-metal-laminates Advanced Composites and Hybrid Materials doi.org/10.1007/s42114-018-0071-0
Šlapǎkovǎ, Křivskǎ, B.; M.; Bajer, J.; Grydin, O.; Stolbchenko, M.; Cieslar, M.: Transmission electron microscopy study of microstructure evolution of Al-Mg-Sc alloy after annealing at 120°C. Acta Physica Polonica A, 2018, Vol. 134 (3). - P. 871-875. DOI: 10.12693/APhysPolA.134.871
Křivskǎ, B.; Šlapǎkovǎ, M.; Bajer, J.; Grydin, O.; Stolbchenko, M.; Cieslar, M.: The evolution of microstructure during annealing of Al-Mg-Sc-Zr alloy deformed by equal channel angular pressing. Acta Physica Polonica A, 2018, Vol. 134 (3). - P. 895-899. DOI: 10.12693/APhysPolA.134.895
Brüggemann, J.-P.; Reschetnik, W.; Kullmer, G.; Richard, H.A.; Aydinöz, M.E.; Hoyer, K.-P.; Schaper, M.:Optimierung der Werkstoffeigenschaften von selektiv lasergeschmolzenem Aluminium 7075.49. Tagung des DVM-Arbeitskreises Bruchmechanik und Bauteilsicherheit. 14.-15.02.2017, Mittweida
Grydin, O.; Andreiev, A.; Briukhanov, A.; Briukhanova, Z.; Schaper, M.: Evolution of microstructure and properties of a two-phase low-carbon steel at cold asymmetric rolling. Steel Research International. 2017 (87)
Grydin, O.; Oginskyi, I.K.; Bondarenko, S.V.; Schaper, M.: Device for twin-roll casting of profiled strips. Patent UA113368, publ. on 10.01.2017, filed on 04.01.2016, appl. No. a201600100. (in Ukrainian)
Grydin, O.; Nürnberger, F.; Schaper, M.: Influence of sticking on the roll topography at twin-roll casting of aluminum alloys. Light Metals 2017. Springer, TMS, 2017. – P. 827-831.
Stolbchenko, M.; Grydin, O.; Schaper, M.: Twin-roll casting of aluminum-steel clad strips: static and dynamic mechanical properties of the composite. Light Metals 2017. Springer, TMS, 2017. – P. 843-851.
Andreiev, A.; Grydin, O.; Schaper, M.: Influence of a rapid heating on the microstructure and properties of press-hardening steel sheets. Proc. of the 3rd Pan American Materials Congress, 26th February-2nd March, San Diego, Springer, TMS, 2017. – P. 723-736.
Cieslar, M.; Bajer, J.; Zimina, M.; Slapakova, M.; Grydin, O.: Properties and microstructure of twin-roll cast Al-Mg alloy containing Sc and Zr. IOP Conf. Series: Materials Science and Engineering. 2017 (179). DOI: 10.1088/1757-899X/179/1/012012
Kustra, P.; Milenin, A.; Byrska-Wójcik, D.; Grydin, O.; Schaper, M.: The process of ultra-fine wire drawing for magnesium alloy with the guaranteed restoration of ductility between passes. Journal of Materials Processing Technology. 2017 (247). - P. 234-242. DOI: 10.1016/j.jmatprotec.2017.04.022
M. Wiesener, K. Peters, A. Taube, A. Keller, K.-P. Hoyer, T. Niendorf, G. Grundmeier: Corrosion properties of bioresorbable FeMn-Ag alloys prepared by selective laser melting. Materials and Corrosion. DOI: 10.1002/maco.201709478
Taube, A.; Reschetnik, W.; Pauli, L.; Hoyer, K.-P.; Kullmer, G.; Schaper, M.: Numerische und mechanische Untersuchung additiv gefertigter TiAl6V4 Gitterstruk-turen. Additive Fertigung von Bauteilen und Strukturen, Herausgeber Richard, H.A.; Schramm, B.; Zipsner, T., Springer Verlag.
Bondarenko, S.; Grydin, O.; Schaper, M: Investigation of dependence of temperature and strain on thin elements of profiled strips at twin-roll casting with an additional thermal resistance. Materials Working by Pressure. 2017 (44), Vol. 1, P. 89-95. (in Russian)
Frolov, Ya.; Stolbchenko, M.; Andreiev, A.; Golovko, O.; Grydin, O.; Schaper, M.; Samsonenko, A.: FEM analysis of multilayer pipes designed for subsea umbilicals. Plastic Deformation of Metals, Ed. by Ya. Frolov. Dnipro, Accent PP, 2017. - P. 159-171.
Grydin, O.; Oginskyi, I.K.; Schaper, M.: Technological casting-rolling line for experimental investigation of the twin-roll casting process at the Paderborn University. Plastic Deformation of Metals, Ed. by Ya. Frolov. Dnipro, Accent PP, 2017. - P. 210-220. (in Russian)
Tillmann, W.; Schaak, C.; Nellesen, J.; Schaper, M.; Aydinöz, M.E.; Hoyer, K.-P.: Hot Isostatic Pressing of IN718 Components Manufactured by Selective Laser Melting. Journal of Additive Manufacturing. Journal of Additive Manufacturing 13, S. 93-102, 2017. http://dx.doi.org/10.1016/j.addma.2016.11.006
Engelkemeier, K.; Grydin, O.; Schaper, M.: Structured zinc oxide powder materials: Synthesis and further investigations of their thermal morphological stability, Powder Technology, 2017, DOI: 10.1016/j.powtec.2017.06.031
Hengsbach, F.; Koppa, P.; Duschik, K.; Holzweissig, M.J.; Burns, M.; Nellesen, J.; Tillmann, W.; Tröster, T.; Hoyer, K.-P.; Schaper, M., Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties, Materials & Design 133, 2017, 136-142, doi.org/10.1016/j.matdes.2017.07.046
Grydin, O.; Stolbchenko, M.; Schaper, M.: Deformation zone length and plastic strain in twin-roll casting of strips of Al-Mg-Si alloy JOM 2017, Vol. 69 (12), P. 2648-2652. DOI: 10.1007/s11837-017-2593-2
Křivská, B.; Šlapáková, M.; Grydin, O.; Cieslar, M.: The microstructure evolution of Al-Mg-Sc-Zr alloy after deformation by equal channel angular pressing Manufacturing Technology 2017, Vol. 17 (5), S. 738-741.
Schmidt, H.C.; Grydin, O.; Stolbchenko, M.; Homberg, W.; Schaper, M.: Manufacturing of thin-walled clad tubes by pressure weldings of roll bonded sheets AIP Conference Proceedings 2017, Vol. 1896, 110003 DOI: 10.1063/1.5008130
Homberg, W.; Rostek, T.; Schaper, M.; Grydin, O.; Andreiev, A.; Brosius, A.; Tulke, M.: Development of hybrid directionally reinforced structural parts for lightweight applications AIP Conference Proceedings 2017, Vol. 1896, 050010 DOI: 10.1063/1.5008055
Grydin, O.; Stolbchenko, M.; Schaper, M.: Impact of steel substrate preheating on microstructure and properties of twin-roll cast aluminium-steel clad strips Procedia Engineering 2017, Vol. 207, P. 1695-1700. DOI: 10.1016/j.proeng.2017.10.924
Lossen, B.; Andreiev, A.; Homberg, W.; Schaper, M.: Friction-spinning-possibility of grain structure adjustment Procedia Engineering 2017, Vol. 207, P. 1749-1754. DOI: 10.1016/j.proeng.2017.10.933
Pai, A.; Niendorf, T.; Krooss, P.; Koke, I.; Traechtler, A.; Schaper, M.: Modelling the constitutive behaviour of martensite and austenite in shape memory alloys using closed-form analytical continuous equations In Smart Structures and Materials 2017, P. 41-66. DOI: 10.1007/978-3-319-44507-6_3
Křivská, B.; Šlapáková, M.; Bajer, J.; Grydin, O.; Cieslar, M. Rolled Al-Mg-Sc alloy studied by transmission electron microscopy Proc. of conf. Metal 2017 Brno 25th-26th May 2017. – P. 2-7.
Šlapáková, M.; Křivská, B.; Bajer, J.; Grydin, O.; Cieslar, M. Al-Mg-Sc Alloys processed by Equal-Channel Angular Pressing Proc. of conf. Metal 2017 Brno 25th-26th May 2017. – P. 8-13.
Schaper, M.; Grydin, O.: Air-hardening steels. In “Fast algorithms for material specific process chain design and analysis in metal forming”, Ed. by R. Kawalla. Freiberg: TU Bergakademie Freiberg, 2016, P. 73-78. ISBN 978-3-86012-535-9
Brosius, A.; Schaper, M.; Svendsen, B.; Tekkaya, A.E.; Barthel, C.; Cwiekala, T.; Grydin, O.: Efficient modeling and simulation of process chains in sheet metal forming and processing. In “Fast algorithms for material specific process chain design and analysis in metal forming”, Ed. by R. Kawalla. Freiberg: TU Bergakademie Freiberg, 2016, P. 321-333. ISBN 978-3-86012-535-9
Herbst, S.; Besserer, H.-B.; Grydin, O.; Milenin, A.; Maier, H.J.; Nürnberger, F.: Holistic Consideration of Grain Growth Behavior of Tempering Steel 34CrNiMo6 during Heating Processes. Journal of Materials Processing Technology. – 2016. – Vol. 229. – P. 61-71. doi:10.1016/j.jmatprotec.2015.09.015
Reschetnik; W.; Brüggemann, J.-P.; Aydinöz, M.E.; Grydin, O.; Hoyer, K.-P.; Kullmer, G.; Richard H.A. Fatigue crack growth behaviour and mechanical properties of additively processed EN AW 7075 aluminium alloy Elsevier/ Journal of Structural Integrity Procedia Volume 2, 2016, Pages 3040–3048 10.1016/j.prostr.2016.06.380
Tillmann, W.; Schaak, C.; Nellesen, J.; Schaper, M.; Aydinöz, M.E.; Hoyer, K.-P. Hot Isostatic Pressing of IN718 Components Manufactured by Selective Laser Melting Journal of Additive Manufacturing - http://dx.doi.org/10.1016/j.addma.2016.11.006
Grydin, O.; Stolbchenko, M.; Schaper, M. Twin-roll casting of carbon fiber-reinforced and glas fiber-reinforced aluminum strips Light Metals 2016 Wiley, TMS, 2016. - P. 1007-1012
Schaak, C.; Tillmann, W.; Schaper, M.; Aydinöz, M.E. Process Gas Infiltration in Inconel 718 Samples during SLM Processing RTeJournal- Forum für Rapid Technologie - https://www.rtejournal.de/ausgabe-13-2016/4403/
Grydin, O.; Bondarenko, S.; Stolbchenko, M.; Schaper, M. Rolling of flat aluminum strips with tailored mechanical properties Materials Science Forum 2016. - Vol. 854. - P. 87-92 - 10.4028/www.scientific.net/MSF.854.87
Stolbchenko, M.; Grydin, O.; Schaper, M. Zwei-Rollen-Verbundbandgießen ILH Insight Ausgabe 2014-2015
Aydinöz, M.E.; Brenne, F.; Schaper, M.; Schaak, C.; Tillmann, W.; Nellesen, J.; Niendorf, T. On the microstructural and mechanical properties of post-treated additively manufactured Inconel 718 superalloy under quasi-static and cyclic loading Materials Science and Engineering A Vol. 669 (2016) 246-258 10.1016/j.msea.2016.05.089
Aydinöz, M.E.; Schaak, C.; Hengsbach, F.; Hoyer, K.-P.; Niendorf, T.; Tillmann, W.; Schaper, M. IN 718 processed by selective laser melting: Effect of precipitation hardening and hot isostatic pressing on the low cycle fatigue behavior at 650 °C DVM Tagung Additiv gefertigte Bauteile und Strukturen 2016 DVM-Bericht 401, Berlin, 2016, pp 141-150 ISSN 2509-8772
Bondarenko, S.; Grydin, O.; Schaper, M. Investigation of defect formation during flat rolling of the pre-profiled strips Materials working by pressure 2016. - Nr. 1 (42). - P. 169-174
Andreiev, A.; Grydin, O.; Schaper, M. Evolution of microstructure and properties of steel 22MnB5 due to short austenitization with subsequent quenching Steel Research International 2016. - Nr. 12 (87). P. 1733-1741 10.1002/srin.201600086
Reschetnik, W.; Brüggemann, J.-P.; Aydinöz, M.E.; Kullmer, G.; Richard, H.A.; Schaper, M. Lebensdauerbeeinflussung durch additive Fertigung DVM Tagung Additiv gefertigte Bauteile und Strukturen 2016 DVM-Bericht 401, Berlin, 2016, pp 131-140 ISSN 2509-8772
Brüggemann, J.-P.; Riemer, A.; Reschetnik, W.; Aydinöz, M.E.; Kullmer, G.; Richard, H.A.; Schaper, M. Optimierung von Fahrradtretkurbeln mittels additiver Fertigung DVM Tagung Additiv gefertigte Bauteile und Strukturen 2016 DVM-Bericht 401, Berlin, 2016, pp 101-112 ISSN 2509-8772
Eacock, F.; Unger, A.; Eichwald, P.; Grydin, O.; Hengsbach, F.; Althoff, S.; Schaper, M.; Guth, K. Effect of different oxide layers on the ultrasonic copper wire bond process IEEE/ Electronic Components and Technology Conference
Althoff, S.; Meyer, T.; Unger, A.; Sextro, W.; Eacock, F. Shape-Dependent Transmittable Tangential Force of Wire Bond Tools IEEE/ Electronic Components and Technology Conference
F. Brenne, A. Taube, M. Pröbstle, S. Neumeier, D. Schwarze, M. Schaper, T. Niendorf Microstructural design of Ni-base alloys for high temperature applications - Impact of heat treatment on microstructure and mechanical properties after Selective Laser Melting Progress in Additive Manufacturing
Niendorf, T.; Brenne, F.; Schaper, M.; Riemer, A.; Leuders, S.; Reimche, W.; Schwarze, D.; Maier, H.J. Labelling additively manufactured parts by microstructural gradation - advanced copy-proof design Rapid Prototyping Journal
Grydin, O.; Andreiev, A.; Schaper, M. Influence of cold asymmetric rolling on the microstructure and propertoes of press-hardening steel 22MnB5 PRICM9, The 9th Pacific Rim International Conference on Advanced Materials and Processing 1.08-05.08.2016, Kyoto, Japan. - P. 470-475.
Frolov, Ia.V.; Makeeva, A.S.; Kovalenko, V.D.; Grydin, O.; Schaper, M.; Stolbchenko, M.; Andreiev, A. Strain parameters at rolling of aluminum strips reinforced with a steel net Metallurgical and Mining Industry 2016. - Vol. 3. - P. 57-65.
Frolov, Ia.; Schaper, M.; Grydin, O.; Andreiev, V.; Tereschenko, A. Propagation of surface defects at cold pilger rolling of tubes and pipes Metallurgical and Mining Industry 2016. - Vol. 9. - P. 72-79.
Milenin, A.; Kustra, P.; Byrska-Wójcik, D.; Grydin, O.; Schaper, M.; Mentlein, T.; Gerstein, G.; Nürnberger, F. Analysis of microstructure and damage evolution in ultra-thin wires of the magnesium alloy MgCa0.8 at multipass drawing JOM 2016. - Vol. 68 (12). - P. 3063-3069. 10.1007/s11837-016-2127-3
Cieslar, M.; Bajer, J.; Zimina, M.; Grydin, O.: Microstructure of twin-roll cast Al-Mg-Sc-Zr alloy, Manufacturing Technology, 2016, Vol. 16 (6), P. 1255-1259.
Zinn, C.; Schaper, M.; Serna Gonzalez, J.; Meiners, D.; Wang, Z.; Tröster, T.: Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids, International Journal of Automotive Composites, 2016, Vol. 3/4(2), P. 244-271.
Gregory Gerstein, Benjamin Klusemann, Swantje Bargmann, Mirko Schaper: Characterization of the Microstructure Evolution in IF-Steel and AA6016 during Plane-Strain Tension and Simple Shear. Materials 2015, 8, pp.285-301; DOI: 10.3390/ma8010285
Grydin, O.; Schaper, M.; Stolbchenko, M.: Comparison of twin-roll casting and high-temperature roll bonding for a steel-clad aluminum strip production. Light Metals 2015, Wiley, TMS, 2015. – P. 1225-1230.
Stolbchenko, M.; Grydin, O.; Schaper, M.: Twin-roll casting and finishing treatment of thin strips of the hardening aluminum alloy EN AW-6082. Materials Today: Proceedings. – 2015. – Vol. 2. – S. 32-38. DOI: 10.1016/j.matpr.2015.05.014
Holzweissig, M.J.; Lackmann, J.; Konrad, S.; Schaper, M.; Niendorf, T.: Influence of Short Austenitization Treatments on the Mechanical Properties of Low-Alloy Steels for Hot Forming Applications. Metallurgical and Materials Transactions A. – 2015. - Vol. 46 (7). - S. 3199-3207. DOI: 10.1007/s11661-015-2907-3.
Pokova, M.; Zimina, M.; Cieslar, M.; Grydin, O.: Investigation of asymmetric rolling applied to twin-roll cast Al-Mn alloy. Proc. of conf. Metal 2015. – Brno 3rd-5th June 2015. – 6 p.
Holzweissig, M.J.; Andreiev, A.; Schaper, M.; Lackmann, J.; Konrad, S.; Rüsing, C. J.; Niendorf, T.: Influence of Short Austenitization Treatments on the Mechanical Properties of Low-Alloy Boron Steels. Proc. of conf. Hot Sheet Metal Forming of High Performance Steel. – Toronto May 31st until June 3rd, pp. 481-488.
Niendorf, T.; Brenne, F.; Hoyer, P.; Schwarze, D.; Schaper, M.; Grothe, R.; Wiesener, M.; Grundmeier, G.; Maier, H.J.: Processing of New Materials by Additive Manufacturing: Iron-Based Alloys Containing Silver for Biomedical Applications. Metallurgical and Materials Transactions A, 2015, 46, pp. 2829-2833. DOI: 10.1007/s11661-015-2932-2.
Andreiev, A.; Golovko, O.; Frolov, I.; Nürnberger, F.; Wolf, L.; Schaper, M.; Grydin, O.: Testing of pipe sections. Materials Testing. – 2015 (57). – Vol. 7-8. – P. 643-648.
Особенности текстурообразования полос высокопрочного алюминиевого сплава AW-6082 при бесслитковой и классической прокатке / А.А. Брюханов, А. Гридин, К. Хюбш, З.А. Брюханова // Деформация иразрушение материалов. – 2015. – №3. – С. 36-41.
Briukhanov, A.A.; Grydin, O.; Hübsch, Ch.; Briukhanova, Z.A.: Features of texture formation in strips of the high-strength aluminum alloy AW-6082 at twin-roll casting and at conventional rolling // Deformation and fracture of materials. – 2015. – Nr.3. – P. 36-41.
Leuders, S.; Vollmer M.; Brenne F.; Tröster T.; Niendorf T.: Fatigue strength prediction for titanium alloy TiAl6V4 manufactured by selective laser melting. Metallurgical and Materials Transactions A. 2015; 46/9, pp. 3816-3832. DOI: 10.1007/s11661-015-2864-x
Vollmer, M.; Krooß, P.; Segel, C.; Weidner, A.; Paulsen, A.; Frenzel, J.; Schaper, M.; Eggeler, G.; Maier, H.J.; Niendorf, T.: Damage evolution in pseodoelastic polycrystalline Co-Ni-Ga high-temperature shape memory alloys. Journal of Alloys and Compounds, 2015, 633, P. 288-295.
Tillmann, W.; Schaak, C.; Nellesen, J.; Schaper, M.; Aydinöz, M.E.; Niendorf, T.: Functional encapsulation of laser melted Inconel 718 by hot isostatic pressing. Powder Metallurgy 2015; 58(4), 259-264.
Rüsing, C.J.; Lambers, H.-G.; Lackmann, J.; Frehn, A.; Nagel, M.; Schaper, M.; Maier, H.J.; Niendorf, T.: Property optimization for TWIP steels – effect of pre-deformation temperature on fatigue properties. Materials Today: Proceedings, 2015. Nr. 2S, P. 259-264.
Pai, A.; Trächtler, A.; Schaper, M.: Real-time compatible phenomenological modelling of the austenitic phase in shape memory alloys as an example for modelling of materials with repeatable non-linear characteristics, Proc. of IFAC, 2015, Nr. 11(48), P. 1043-1048.
Pai, A.; Niendorf, T.; Kroos, P.; Koke, I.; Trächtler, A.; Schaper, M.: Modelling the constitutive behaviour of martensite and austenite in shape memory alloys using closed-form analytical continuous equations, Proc. of 7th ECCOMAS Thematic Conference on Smart Structures and Materials SMART 2015, 2015, 1 p.
Grydin, O.; Stolbchenko, M.; Nürnberger, F.; Schaper, M.: Influence of hot deformation on the mechanical properties and microstructure of a twin-roll cast aluminium alloy EN AW-6082. Journal of Materials Engineering and Performance, 2014 (23), Nr.3, pp. 937-943.
DOI: 10.1007/s11665-013-0816-4
Grydin, O.; Stolbchenko, M.; Nürnberger, F.; Schaper, M.: Influence of the twin-roll casting parameters on the microsegregation in thin strips of the aluminium alloy EN AW-6082. Light Metals 2014, Wiley, TMS, 2014, pp. 411-414.
Grydin, O.; Nürnberger, F.; Zou, Y.; Schaper, M.; Brosius, A.: Formation and properties of mixed ferritic-martensitic microstructures in the air-hardening steel LH800. Steel research international, 2014 (85), Nr.9, pp. 1340-1347.
DOI: 10.1002/srin.201300420
Schmidt, H.Ch.; Rodman, D.; Grydin, O.; Ebbert, Ch.; Homberg, W.; Maier, H.J.; Grundmeier, G.: Joining with electrochemical support: cold pressure welding of copper – weld formation and characterization. Advanced Materials Research, 2014, Vols. 966-967, pp. 453-460.
DOI: 10.4028/www.scientific.net/AMR.966-967.453.
Развитие экспериментальных методов исследования валковой разливки-прокатки // А.Ю. Гридин, В.Н. Данченко, А.Н. Головко, М. Шапер. В колл. моногр. Пластическая деформация металлов. – Днепропетровск: Акцент ПП, 2014. – С. 6-23.
Grydin, O.; Danchenko, V.M.; Golovko, O.M.; Schaper, M.: Development of experimental investigation methods for twin-roll casting. In Plastic deformation of metals, Edited by O.M. Golovko: Akcent PP, 2014, pp. 6-23. (in Russian)
Rodman, M.; Briukhanov, A.A.; Bach, Fr.-W.; Grydin, O.; Klose, C.; Gerstein, G.: Complex investigations of the influence of low cycle sign-variable bending on the mechanical properties of magnesium alloy AZ31 sheet. Conf. proc. “Plastic deformation of metals 2014”, Vol. 1, Dnipropetrovsk, 19th-23th May 2014, pp. 23-27.
Niendorf, T.; Leuders, S.; Riemer, A.; Brenne, F.; Tröster, T.; Richard, H.A.; Schwarze, D.: Functionally Graded Alloys Obtained by Additive Manufacturing. Advanced Engineering Materials, 2014, 16 (7), pp. 857-861.
DOI: 10.1002/adem.201300579
Niendorf, T.; Brenne, F.; Schaper, M.: Lattice structures manufactured by SLM – On the effect of geometrical dimensions on microstructure evolution during processing. Metallurgical and Materials Transactions B, 2014, 45B, pp. 1181-1185.
DOI: 10.1007/s11663-014-0086-z
Niendorf, T.; Krooß, P.; Batyrsina, E.; Paulsen, A.; Frenzel, J.; Eggeler, G.; Maier, H.J.; On the functional degradation of binary titanium-tantalum high-temperature shape memory alloys - A new concept for fatigue life extension; functional materials letters, 2014; DOI: 10.1142/S1793604714500428
Krooß, P.; Holzweißig, M.J.; Niendorf, T.; Somsen, C.; Schaper, M.; Chumlyakov, Y.; Maier, H.J.; Thermal cycling behavior of an aged FeNiCoAlTa single-crystal shape memory alloy, Volume 81, 15 June 2014, Pages 28-31; DOI: 10.1016/j.scriptamat.2014.02.020
Krooß, P.; Somsen, C.; Niendorf, T.; Schaper, M.; Karaman, I.; Chumlyakov, Y.; Eggeler, G.; Maier, H.J.; Cyclic degradation mechanisms in aged FeNiCoAlTa shape memory single crystals; Acta Materialia; ACCEPTED
Rüsing, C.J; Niendorf, T.; Frehn, A.; Maier, H.J.: Low-cycle fatigue behavior of TWIP steel – Effect of grain size, Advanced Material Research Vols. 891-892 (2014) pp 1603-1608
Holzweissig, M.J.; Kanagarajah, P.; Maier, H.J.: Digital image correlation at high temperatures for fatigue and phase transformation studies, Journal of Strain Analysis for Engineering Design, 2014, 49, 204-211
Stolbchenko, M.; Grydin, O.; Samsonenko, A.; Khvist, V.; Schaper, M.: Numerical analysis of the twin-roll casting of thin aluminium-steel clad strips. Forschung im Ingenierwesen. – 2014, 3-4 (78). – P. 121-130. DOI 10.1007/s10010-014-0182-x.
Golovko, O.; Frolov, I.; Rodman, D.; Nürnberger, F.; Grydin, O.; Schaper, M.: Spray cooling of extruded AN AW-6082 aluminium alloy sheets: spatial heat transfer coefficients. Forschung im Ingenierwesen. – 2014. DOI 10.1007/s10010-014-0181-y.
Stolbchenko, M.; Grydin, O.; Schaper, M.; Nürnberger, F.; Samsonenko A. Sandwich rolling of twin-roll cast aluminium-steel clad strips. Procedia Engineering. – 2014 (81). – P. 1541-1546. DOI: 10.1016/j.proeng.2014.10.187
Eacock, F.; Schaper, M.; Althoff, S.; Unger, A.; Eichwald, P.; Hengsbach, F.; Zinn, C.; Holzweissig, M.; Guth, K.: Microstructural investigations of aluminum and copper wire bonds, Proceedings of the 47th International Symposium on Microelectronics, 2014.
Holzweissig, M.J.; Taube, A.; Brenne, F.; Schaper, M.; Niendorf, T.: Microstructural Characterization and Mechanical Performance of Hot Work Tool Steel Processed by Selective Laser Melting. Metallurgical and Materials Transactions B, accepted.
T. Hassel, M. Bauer, P. Hoyer, A. Patil, E. Beniash, F.-W. Bach, H. J. Maier:
Study of magnesium fluoride and self-assembled organosilane coatings of AZ31 and MgCa0.8 alloys, European Cells and Materials, ISSN 1473-2262, Tagungsband 6th Biometals Symposium on Biodegradable Metals for Biomedical Applications, Maratea, Italien, August 24th-29th, 2014
S.M. Toker, D. Canadinc, A. Taube, G. Gerstein, H.J. Maier: On the role of slip–twin interactions on the impact behavior of high-manganese austenitic steels. Journal of Materials Science and Engineering: A, 2014, Vol. 593, pp. 120-126.
W. Tillmann, C. Schaak, J. Nellesen, M. Schaper, M. E. Aydinöz, T. Niendorf: Functional Encapsulation of Laser Melted Inconel 718 by Arc-PVD and HVOF for Post Compacting by Hot Isostatic Pressing, Euro PM2014 – AM: Characterisation and Post Treatment
K.-P. Hoyer: Korrosionsuntersuchungen an experimentellen und technisch relevanten Magnesiumlegierungen, Berichte aus dem IW, Dissertation, Band IW 07/2014, ISBN 978-3-944586-93-9, PZH-Verlag, 15.12.2014
S. Leuders, M. Thöne, A. Riemer, T. Niendorf, T. Tröster, H.A. Richard, H.J. Maier
"On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance"
Int. J. Fatigue 48, 2013, 300-307.
T. Niendorf, J.Dadda, J. Lackmann, J.A. Monroe, I. Karaman, E. Panchenko, H. E. Karaca, H.J. Maier
"Tension - Compression Asymmetry in Co49Ni21Ga30 High-Temperature Shape Memory Alloy Single Crystals"
Mater. Sci. For. 738-739, 2013, 82-86.
T. Niendorf, A. Böhner, H.W. Höppel, M. Göken, R.Z. Valiev, H.J. Maier
"Comparison of the monotonic and cyclic mechanical properties of ultrafine-grained low carbon steels processed by ECAP-Conform and conventional equal channel angular pressing"
Mater. Design 47, 2013, 138-142.
R.M. Kemper, L. Hiller, T. Stauden, J. Pezoldt, K. Duschik, T. Niendorf, H.J. Maier, D. Meertens, K. Tillmann, D.J. As, J.K.N. Lindner
"Growth of cubic GaN on 3C-SiC/Si (001) nanostructures"
J. Crystal. Growth in press, 2013.
F. Brenne, T. Niendorf, H.J. Maier
"Additively manufactured cellular structures: Impact of microstructure and local strains on the monotonic and cyclic behavior under uniaxial and bending load"
J. Mater. Proc. Tech., in press, 2013.
T. Niendorf, F. Brenne, C.-N. Liu, O. Ozcan
"In-situ characterization of the damage evolution in thin polyelectrolyte films on TWIP steel substrates"
Mater. Sci. Eng. A 566, 2013, 82-89.
F. Rubitschek, T. Niendorf, I. Karaman, H.J. Maier
"Surface Hardening of Biocompatible Ultrafine-Grained Niobium Zirconium Alloy by Two-stage Oxidation Treatment"
J. Mater. Sci., in press, 2013.
A. Kurtovic, T. Niendorf, T. Hausöl, H.W. Höppel, M. Göken, H. J. Maier
"Surface strain evolution of UFG aluminum alloy laminates under tension – the role of the PLC effect"
Scripta Mater. 68, 2013, 809-812.
T. Niendorf, C.J. Rüsing, A. Frehn, H.J. Maier
"On the deformation behavior of functionally graded TWIP steel under monotonic loading at ambient temperature"
Materials Research Letters, 1:2, 96-101, DOI: 10.1080/21663831.2013.782075, 2013.
T. Niendorf, F. Brenne:
Steel showing twinning-induced plasticity processed by selective laser melting - An additively manufactured high performance material, Materials Characterization 85, 2013, 57-63.
T. Niendorf, S. Leuders, A. Riemer, H.A. Richard, T. Tröster, D. Schwarze:
Highly anisotropic steel processed by selective laser melting, Metall. Mater. Trans. B 44, 2013, 794-796.
J. Käsewieter, S. Kajari-Schröder, T. Niendorf, R. Brendel:
Failure stress of epitaxial silicon thin films, Energy Procedia 38, 2013, 926-932.
A.Riemer, S. Leuders, M. Thöne, H.A. Richard, T. Troester, T. Niendorf:
On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting, Eng. Fract. Mech., 2013, submitted.
P. Kanagarajah, F. Brenne, T. Niendorf, H.J. Maier:
Inconel 939 processed by Selective Laser Melting: Effect of microstructure and temperature on the mechanical properties under static and cyclic loading, Mater. Sci. Eng. A 588, 2013, 188-195.
C.J. Rüsing, T. Niendorf, A. Frehn, H.J. Maier:
Low-cycle fatigue behavior of TWIP steel – Effect of grain size, Adv. Mater. Res., submitted, 2013.