Vorträge und Poster
SFS-gestützte Synthese von Katalysatorpartikeln zur selektiven katalytischen Reduktion von NOx
J. Beimdiek, H.-J. Schmid, in: 2025.
Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering
I. Kletetzka, F. Neitzel, H.-J. Schmid, in: J. Beaman (Ed.), Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.
Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering
I. Kletetzka, F. Neitzel, H.-J. Schmid, in: J. Beaman (Ed.), Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.
Entrained flow SCR using an in-situ synthesis of catalyst particles for a combined flue gas cleaning system
J. Beimdiek, H.-J. Schmid, in: VDI Verlag, Düsseldorf, 2023.
Halogen-Free Flame Retardant Powder Materials for Laser Sintering: Evaluation and Process Stability Analysis
F. Neitzel, I. Kletetzka, H.-J. Schmid, in: J. Beaman (Ed.), Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.
Combined filtration process for biomass combustion plants to comply with legal requirements (oral presentation)
J. Beimdiek, F. Prill, M. König, M. Müller, I. Hartmann, H.-J. Schmid, in: 13th World Filtration Congress Proceedings, 2022.
Effects of spherical fillers on the processability and mechanical properties of PA613 and PP-based LS dry blends
I. Kletetzka, R. Gawlikowicz, H.-J. Schmid, in: Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2022.
Powder Spread Flaws in Polymer Laser Sintering and its Influences on Mechanical Performance
S.H. Klippstein, H.-J. Schmid, in: Proceedings of the 33nd Annual International Solid Freeform Fabrication Symposium, Austin, TX, USA, 2022.
Shelf Life of Polyamide 12 (PA2200) Laser Sintering Powder
I. Kletetzka, S.H. Klippstein, H.-J. Schmid, in: Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2022.
Charakterisierung des Fließverhaltens von Frischbeton – Entwicklung eines adaptiven Rheometers (ACCR) und Einfluss von Maßnahmen zur Sedimentationsprävention
S. Pawelczyk, S. Jesinghausen, H.-J. Schmid, Charakterisierung des Fließverhaltens von Frischbeton – Entwicklung eines adaptiven Rheometers (ACCR) und Einfluss von Maßnahmen zur Sedimentationsprävention, Digitales Jahrestreffen der ProcessNet Fachgruppen MPH und CFD, 2021.
Laser Sintering Design Guidelines for media transmitting Components
I. Kletetzka, C. Kummert, H.-J. Schmid, in: Proceedings of the 32nd Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2021.
Low Temperature Laser Sintering on a Standard System: First Attempts and Results with PA12
D. Menge, H.-J. Schmid, in: 2021.
Pulverherstellung und Verrundung neuer Polymermaterialien für das selektive Lasersintern (SLS) - Poster
S. Ponusamy, Pulverherstellung und Verrundung neuer Polymermaterialien für das selektive Lasersintern (SLS) - Poster, 2021.
Influence of Part Microstructure on Mechanicl Properties of PA6X Laser Sintered Specimens
C. Kummert, W. Diekmann, K. Tews, H.-J. Schmid, in: 29th Annual International Solid Freeform Fabrication Symposium, 2020, pp. 735–744.
Devolopment, Production and post-processing of a topology optimized aircraft bracket
S.H. Klippstein, A. Duchting, T. Reiher, F. Hengsbach, D. Menge, H.-J. Schmid, in: 30th Annual International Solid Freeform Fabrication Symposium, 2019, pp. 1932–1945.
Methodik zur Qualifizierung des Lasersinter Prozesses für die Serienfertigung
S.H. Klippstein, H.-J. Schmid, in: Proceedings of the 16th Rapid.Tech Conference, 2019.
Topology Optimized Heat Transfer Using the Example of an Electronic Housing
D. Menge, P. Delfs, M. Töws, H.-J. Schmid, in: 29th Annual International Solid Freeform Fabrication Symposium, 2018, pp. 687–697.
Maßtoleranzen für die additive Fertigung: Experimentelle Untersuchungen für das Lasersintern
T. Lieneke, G. Adam, S. Josupeit, P. Delfs, D. Zimmer, in: Proceedings of the 14th Rapid.Tech Conference, Hanser Verlag, 2017, pp. 327–344.
Dimensional accuracy of polymer laser sintered parts: Influences and measures
S. Josupeit, P. Delfs, T. Lieneke, G. Adam, M. Gessler, H. Pfisterer, H.-J. Schmid, in: Rapid Tech - International Trade Show & Conference for Additive Manufacturing , 2016, pp. 107–120.
Extended Analysis of the Surface Topography of Laser Sintered Polymer Parts
P. Delfs, H.-J. Schmid, in: Fraunhofer Direct Digital Manufacturing Conference, 2016, pp. 411–414.
Influences on the dimensional Accuracy of Laser Sintered Parts along the Process Chain
S. Josupeit, P. Delfs, T. Lieneke, H.-J. Schmid, in: 27th Annual International Solid Freeform Fabrication Symposium , 2016.
Manufacturability and Mechanical Characterization of Laser Sintered Lattice Structures
S. Josupeit, P. Delfs, D. Menge, H.-J. Schmid, in: 27th Annual International Solid Freeform Fabrication Symposium , 2016, pp. 2077–2086.
Thermal properties of polyamide 12 powder for application in laser sintering
S. Josupeit, H.-J. Schmid, in: International Congress on Particle Technology (PARTEC) , 2016.
Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen für additive Fertigungsverfahren
T. Lieneke, G. Adam, S. Leuders, F. Knoop, S. Josupeit, P. Delfs, N. Funke, D. Zimmer, in: Proceedings of the Rapid Tech 2015, 2015.
Mass finishing of laser sintered parts
P. Delfs, Z. Li, H.-J. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 514–526.
Material Properties of Laser Sintered Polyamide 12 as Function of Build Cycles Using Low Refresh Rates
S. Josupeit, J. Lohn, E. Hermann, M. Gessler, S. Tenbrink, H.-J. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 540–549.
Powder ageing and material properties of laser sintered polyamide 12 using low refresh rates
S. Josupeit, S. Tutzschky, M. Gessler, H.-J. Schmid, in: Proceedings of the Rapid Tech 2015, Springer Vieweg, 2015, pp. 63–78.
Surface roughness optimized alignment of parts for additive manufacturing processes
P. Delfs, M. Toews, H.-J. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 1334–1344.
Systematical determination of tolerances for additive manufacturing by measuring linear dimensions
T. Lieneke, G. Adam, S. Leuders, F. Knoop, S. Josupeit, P. Delfs, N. Funke, D. Zimmer, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 371–384.
Temperature History within Laser Sintered Part Cakes and its Influence on Process Quality
S. Josupeit, H.-J. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 190–199.
Development of a Basic Model to Simulate the Laser Sintering Cooling Process
S. Josupeit, L. Ordia, H.-J. Schmid, in: International Conference on Additive Technologies, 2014, pp. 222–227.
Simulation of the Surface Topography on Laser Sintered Polymer Parts
P. Delfs, A.A. Herale, Z. Li, H.-J. Schmid, in: 25th Annual International Solid Freeform Fabrication Symposium, 2014, pp. 1250–1258.
Simulation of the Surface Topography on Laser Sintered Polymer Parts
P. Delfs, H.-J. Schmid, in: 25th Annual International Solid Freeform Fabrication Symposium, 2014, pp. 1250–1258.
Thermal ageing of polyamide 12 used for polymer laser sintering - influence on part quality characteristics
S. Josupeit, S. Rüsenberg, N. Rupp, M. Gessler, H.-J. Schmid, in: 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2014), 2014, pp. 2383–2385.
Three-dimensional in-process temperature measurement of laser sintered part cakes
S. Josupeit, H.-J. Schmid, in: 25th Annual International Solid Freeform Fabrication Symposium, 2014, pp. 49–58.
A material-based quality concept for polymer laser sintering
S. Josupeit, S. Rüsenberg, H.-J. Schmid, in: 24th Annual International Solid Freeform Fabrication Symposium , 2013, pp. 44–54.
Additiv versus Konventionell: Benchmarking am Beispiel eines Designs aus der Luftfahrtindustrie
S. Rüsenberg, A. Bagsik, J. Büsching, H.-J. Schmid, in: RapidTech, 2013.
Advanced characterization method of Nylon 12 materials for application in laser sinter processing
S. Rüsenberg, H.-J. Schmid, in: International Conference of the Polymer-Processing-Society (PPS), 2013.
Mechanische und rheologische Untersuchungen neuer Laser Sinter Materialien
S. Josupeit, S. Rüsenberg, H.-J. Schmid, in: Merseburger Rapid Prototyping Forum, 2013.
Controlling the Quality of Laser Sintered Parts Along the Process Chain
S. Rüsenberg, R. Weiffen, F. Knoop, H.-J. Schmid, in: 23rd Annual International Solid Freeform Fabrication Symposium, 2012, pp. 1024–1044.
Mechanical Properties as a Result of multitude of Parameters
S. Rüsenberg, H.-J. Schmid, in: The European Forum on Additive Manufacturing, 2012.
Mechanical and Physical Properties - A Way to asses quality of Laser Sintered Parts
S. Rüsenberg, L. Schmidt, H.-J. Schmid, in: 22th Annual International Solid Freeform Fabrication Symposium, 2011, pp. 239–251.
Show all publications