RIS Pub­lika­tion­en

Evaluation of Surrogate Aerosol Experiments to Predict Spreading and Removal of Virus-Laden Aerosols

J. Beimdiek, H.-J. Schmid, Atmosphere 15 (2024).

DOI

Zur Abscheidung von Tröpfchen-Aerosolen in filternden Abscheidern

R. Hassel, Zur Abscheidung von Tröpfchen-Aerosolen in filternden Abscheidern, Paderborn, 2024.

DOI

Rheologische Charakterisierung von Frischbeton : Entwicklung eines adaptiven Rheometers und Untersuchung wandgleitunterdrückender Messgeometrien

S. Josch, Rheologische Charakterisierung von Frischbeton : Entwicklung eines adaptiven Rheometers und Untersuchung wandgleitunterdrückender Messgeometrien, Paderborn, 2023.

DOI

Numerical Computation of Capillary Bridges between Directly Resolved Rough Interfaces

M. Gräßer, Numerical Computation of Capillary Bridges between Directly Resolved Rough Interfaces, 2023.

DOI

Experimental and simulative determination and correction of the effective gap extension in structured coaxial measuring systems

S. Josch, S. Jesinghausen, C. Dechert, H.-J. Schmid, Rheologica Acta (2023).

DOI

Development of an adaptive coaxial concrete rheometer and rheological characterisation of fresh concrete

S. Josch, S. Jesinghausen, H.-J. Schmid, Applied Rheology 33 (2023).

DOI

Flowability of polymer powders at elevated temperatures for additive manufacturing

M.J. Rüther, S.H. Klippstein, S. Ponusamy, T. Rüther, H.-J. Schmid, Powder Technology 422 (2023).

DOI

Influence of the filler–matrix adhesion and the effects of conditioning on tensile properties of laser-sintered parts built with polyamide–glass bead dry blends

I. Kletetzka, M. Kosanke, D. Meinderink, V. Neßlinger, G. Grundmeier, H.-J. Schmid, Progress in Additive Manufacturing (2023).

DOI

Influence of the filler matrix adhesion and the effects of conditioning on tensile properties of laser sintered parts built with polyamide glass bead dry blends

I. Kletetzka, M. Kosanke, D. Meinderink, V. Neßlinger, G. Grundmeier, H.-J. Schmid, (2023).


Influence of a prolonged shelf time on PA12 laser sintering powder and resulting part properties

S.H. Klippstein, I. Kletetzka, I. Sural, H.-J. Schmid, The International Journal of Advanced Manufacturing Technology (2023).

DOI

Case Study IV: Individualized Medical Technology using Additive Manufacturing

D. Menge, D. Milaege, K.-P. Hoyer, H.-J. Schmid, M. Schaper, in: I. Horwath, S. Schweizer (Eds.), Climate Protection, Resource Efficiency, and Sustainable Engineering, transcript Verlag, Bielefeld, Germany, 2023.

DOI

Model droplet formation in extensional filament stretching within a Filament Extension Atomizer

M. Neukötter, S. Jesinghausen, H.-J. Schmid, Rheologica Acta (2022).

DOI

Über die thermischen und thermisch-oxidativen Einflüsse auf Lasersinter-Werkstoffe

C. Kummert, Über die thermischen und thermisch-oxidativen Einflüsse auf Lasersinter-Werkstoffe, Shaker Verlag, Düren, 2022.


Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 2

M.J. Rüther, S.H. Klippstein, S. Ponusamy, S. Jesinghausen, H.-J. Schmid, Werkstoffe 6 (2022) 18–19.


Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 1

M.J. Rüther, S.H. Klippstein, S. Ponusamy, S. Jesinghausen, H.-J. Schmid, Werkstoffe 5 (2022) 28–29.


Powder Spread Process Monitoring in Polymer Laser Sintering and its Influences on Part Properties

S.H. Klippstein, F. Heiny, N. Pashikanti, M. Gessler, H.-J. Schmid, JOM - The Journal of The Minerals, Metals & Materials Society (TMS) 74 (2022) 1149–1157.

DOI

A Shape Newton Scheme for Deforming Shells with Application to Capillary Bridges

S. Schmidt, M. Gräßer, H.-J. Schmid, SIAM Journal on Scientific Computing 44 (2022) B1175–B1194.

DOI

Low Temperature Laser Sintering with PA12 and PA6 on a Standard System

D. Menge, H.-J. Schmid, Macromolecular Symposia 404 (2022).

DOI

Dreidimensionale Oberflächenanalyse und Topografie-Simulation additiv hergestellter Laser-Sinter Bauteile

P. Delfs, Dreidimensionale Oberflächenanalyse und Topografie-Simulation additiv hergestellter Laser-Sinter Bauteile, Shaker Verlag GmbH, Düren, 2021.


Mechanical characterization and numerical modeling of laser-sintered TPE lattice structures

C. Kummert, H.-J. Schmid, L. Risse, G. Kullmer, Journal of Materials Research (2021).

DOI

Effektivität von Luftreinigern zur Reduzierung des COVID-19-Infektionsrisikos/ Efficacy of air purifiers in reducing the risk of COVID-19 infections

S. Schumacher, C. Asbach, H.-J. Schmid, Gefahrstoffe (2021) 16–28.

DOI

Interlaboratory study on rheological properties of cement pastes and reference substances: comparability of measurements performed with different rheometers and measurement geometries

M. Haist, J. Link, D. Nicia, S. Leinitz, C. Baumert, T. von Bronk, D. Cotardo, M. Eslami Pirharati, S. Fataei, H. Garrecht, C. Gehlen, I. Hauschildt, I. Ivanova, S. Jesinghausen, C. Klein, H.-W. Krauss, L. Lohaus, D. Lowke, O. Mazanec, S. Pawelczyk, U. Pott, N.W. Radebe, J.J. Riedmiller, H.-J. Schmid, W. Schmidt, E. Secrieru, D. Stephan, M. Thiedeitz, M. Wilhelm, V. Mechtcherine, Materials and Structures (2020).

DOI

An Apparatus to Synthesize Ceramic Nanoparticles with a Precisely Adjusted Temperature History and a Significant Mass Output

D.B. Rasche, L. Tigges, H.-J. Schmid, Review of Scientific Instruments 91 (2020) 055104.

DOI

Interlaboratory study on rheological properties of cement pastes and reference substances: comparability of measurements performed with different rheometers and measurement geometries

M. Haist, J. Link, D. Nicia, S. Leinitz, C. Baumert, T. von Bronk, D. Cotardo, M. Eslami Pirharati, S. Fataei, H. Garrecht, C. Gehlen, I. Hauschildt, I. Ivanova, S. Jesinghausen, C. Klein, H.-W. Krauss, L. Lohaus, D. Lowke, O. Mazanec, S. Pawelczyk, U. Pott, N.W. Radebe, J.J. Riedmiller, H.-J. Schmid, W. Schmidt, E. Secrieru, D. Stephan, M. Thiedeitz, M. Wilhelm, V. Mechtcherine, Materials and Structures (2020).

DOI

Absolute Rheological Measurements of Model Suspensions: Influence and Correction of Wall Slip Prevention Measures

S. Pawelczyk, M. Kniepkamp, S. Jesinghausen, H.-J. Schmid, Materials (2020).

DOI

Improving the performance of household refrigerating appliances through the integration of phase change materials in the context of the new global refrigerator standard IEC 62552:2015

G. Sonnenrein, E. Baumhögger, A. Elsner, A. Morbach, M. Neukötter, A. Paul, J. Vrabec, International Journal of Refrigeration 119 (2020) 448–456.

DOI

On the Influence of Thermal Histories within Part Cakes on the Polymer Laser Sintering Process

S. Josupeit, On the Influence of Thermal Histories within Part Cakes on the Polymer Laser Sintering Process, Shaker Verlag GmbH, Düren, 2019.


Zum Laserstrahlschmelzen neuer Kunststoffmaterialien

J. Lohn, Zum Laserstrahlschmelzen neuer Kunststoffmaterialien, Shaker Verlag GmbH, Düren, 2019.


Understanding and Manipulation of Nanoparticle Contact Forces by Capillary Bridges

H.-J. Schmid, G. Grundmeier, M. Dörmann, A.G. Orive, T. de los Arcos, B. Torun, in: Particles in Contact, Cham, 2019.

DOI

Numerische und experimentelle Untersuchungen zur Aerosolbildung aus binären Dampfgemischen von Wasser und Glycerin

X. Zhen, Numerische Und Experimentelle Untersuchungen Zur Aerosolbildung Aus Binären Dampfgemischen von Wasser Und Glycerin, 2019.


Water adsorption and capillary bridge formation on silica micro-particle layers modified with perfluorinated organosilane monolayers

I. Giner, B. Torun, Y. Han, B. Duderija, D. Meinderink, A.G. Orive, M.T. de los Arcos de Pedro, C. Weinberger, M. Tiemann, H.-J. Schmid, G. Grundmeier, Applied Surface Science (2019) 873–879.

DOI

Representative domain size for the simulation of coalescence filtration in nonwoven and foam media

S. Abishek, A.J.C. King, J. Schuler, G. Kasper, H.-J. Schmid, B.J. Mullins, Separation and Purification Technology (2018) 344–352.

DOI

Thermoplastic Elastomer Part Color as Function of Temperature Histories and Oxygen Atmosphere During Selective Laser Sinterung

C. Kummert, S. Josupeit, H.-J. Schmid, Journal of Minerals, Metals and Materials Society 70 (2018) 425–430.

DOI

Confinement Induced Segregation Effects in Suspension Rheology

S. Pieper, Confinement Induced Segregation Effects in Suspension Rheology, Shaker Verlag, Aachen, 2018.


Entwicklung einer Prozesskette zum flüssig-flüssig Phasentransfer nanoskaliger Partikeln

P. Grimm, Entwicklung einer Prozesskette zum flüssig-flüssig Phasentransfer nanoskaliger Partikeln, 2018.


Zur Modellierung von Kapillarbrücken zwischen nanoskaligen Partikeln

M. Dörmann, Zur Modellierung von Kapillarbrücken zwischen nanoskaligen Partikeln, 2018.


Aufbau einer Lasersinter-Versuchsanlage und Verarbeitung neuer Materialien am Beispiel von Polyamid 6 und Polyamid 613

J. Lohn, H.-J. Schmid, in: Rapid.Tech – International Trade Show & Conference for Additive Manufacturing, München, 2017.

DOI

Dependencies of the Adhesion Forces between TiO2 Nanoparticles on Size and Ambient Humidity

J. Laube, M. Dörmann, H.-J. Schmid, L. Mädler, L. Colombi Ciacchi, The Journal of Physical Chemistry C (2017) 15294–15303.

DOI

Distance-dependency of capillary bridges in thermodynamic equilibrium

M. Dörmann, H.-J. Schmid, Powder Technology (2017) 175–183.

DOI

Herstellbarkeit und mechanische Charakterisierung von lasergesinterten Gitterstrukturen

D. Menge, S. Josupeit, P. Delfs, H.-J. Schmid, in: H.A. Richard, B. Schramm, T. Zipsner (Eds.), Additive Fertigung von Bauteilen und Strukturen, Springer Vieweg, Wiesbaden, 2017, pp. 105–120.

DOI

Experimental analysis and modeling of local ageing effects during laser sintering of polyamide 12 in regard to individual thermal histories

S. Josupeit, H.-J. Schmid, Journal of Applied Polymer Science 134 (2017).

DOI

Rheo-PIV nichtkolloidaler Suspensionen: Strukturelle Untersuchungen der Strömungsentwicklung in Schlitzdüsen mit Fokus auf Wandgleiten

S. Jesinghausen, Rheo-PIV nichtkolloidaler Suspensionen: Strukturelle Untersuchungen der Strömungsentwicklung in Schlitzdüsen mit Fokus auf Wandgleiten, Shaker, Aachen, 2017.


Modelling of temperatures and heat flow within laser sintered part cakes

S. Josupeit, L. Ordia, H.-J. Schmid, Additive Manufacturing (2016) 189–196.

DOI

Guard ring induced distortion of the steady velocity profile in a parallel plate rheometer

H.-J. Schmid, S. Pieper, Applied Rheology (2016).

DOI

Layer-formation of non-colloidal suspensions in a parallel plate rheometer under steady shear

S. Pieper, H.-J. Schmid, Journal of Non-Newtonian Fluid Mechanics (2016) 1–7.

DOI

Additive Fertigung

J. Gausemeier, M. Schmidt, R. Anderl, H.-J. Schmid, C. Leyens, G. Seliger, M. Karg, M. Kage, Additive Fertigung, acatech - Deutsche Akademie der Technikwissenschaften, München, 2016.


Optimized build orientation of additive manufactured parts for improved surface quality and build time

P. Delfs, M. Tows, H.-J. Schmid, Additive Manufacturing 2 (2016) 214–320.

DOI

Geometrische Genauigkeit von Lasersinter-Bauteilen: Einflüsse und Maßnahmen / Dimensional accuracy of polymer laser sintered parts: Influences and measures

W. Kniffka, M. Eichmann, G. Witt, S. Josupeit, P. Delfs, T. Lieneke, G. Adam, H.-J. Schmid, eds., Geometrische Genauigkeit von Lasersinter-Bauteilen: Einflüsse Und Maßnahmen / Dimensional Accuracy of Polymer Laser Sintered Parts: Influences and Measures, München, 2016.

DOI

Direct measurement of wall slip and slip layer thickness of non-Brownian hard-sphere suspensions in rectangular channel flows

S. Jesinghausen, R. Weiffen, H.-J. Schmid, Experiments in Fluids (2016).

DOI

Zur Feinstaubabscheidung aus Holzfeuerungsanlagen mit precoatierten Oberflächenfiltern

S. Schiller, Zur Feinstaubabscheidung aus Holzfeuerungsanlagen mit precoatierten Oberflächenfiltern, Shaker Verlag, 2016.


Layer-formation of non-colloidal suspensions in a parallel plate rheometer under steady shear

S. Pieper, H.-J. Schmid, Journal of Non-Newtonian Fluid Mechanics (2016) 1–7.

DOI

Prozessqualifizierung zur verlässlichen Herstellung von Produkten im Polymer Lasersinterverfahren

S. Rüsenberg, Prozessqualifizierung zur verlässlichen Herstellung von Produkten im Polymer Lasersinterverfahren, Shaker Verlag GmbH, Düren, 2015.


Evaluation of the Efficiency of Filtration Processes Using Precoat Materials

S. Schiller, C. Hellmich, H.-J. Schmid, Chemical Engineering & Technology (2015) 491–498.

DOI

Process Development of a Liquid-Liquid Phase Transfer of Colloidal Particles for Production of High-Quality Organosols

J.V. Erler, S. Machunsky, S. Franke, P. Grimm, H.-J. Schmid, U.A. Peuker, in: Colloid Process Engineering, Cham, 2015.

DOI

Bipolar charge distribution of a soft X-ray diffusion charger

L. Tigges, A. Wiedensohler, K. Weinhold, J. Gandhi, H.-J. Schmid, Journal of Aerosol Science (2015) 77–86.

DOI

On the bipolar charge distribution used for mobility particle sizing: Theoretical considerations

L. Tigges, A. Jain, H.-J. Schmid, Journal of Aerosol Science (2015) 119–134.

DOI

Highly efficient filtration of ultrafine dust in baghouse filters using precoat materials

S. Schiller, H.-J. Schmid, Powder Technology (2015) 96–105.

DOI

Simulation of Capillary Bridges between Particles

M. Dörmann, H.-J. Schmid, Procedia Engineering (2015) 14–23.

DOI

Absence of pressure sensitivity of apparent wall slip in pressure-driven flow of non-colloidal suspensions

S. Pieper, N. Kirchhoff, H.-J. Schmid, Rheologica Acta (2014) 69–75.

DOI

Ultrafine Dust Filtration Using Precoat Materials Considering the Influence of Filter Media

S. Schiller, H.-J. Schmid, Chemical Engineering & Technology (2014) 1009–1020.

DOI

Simulation of Capillary Bridges between Nanoscale Particles

M. Dörmann, H.-J. Schmid, Langmuir (2014) 1055–1062.

DOI

A method to characterize the quality of a polymer laser sintering process

S. Rüsenberg, S. Josupeit, H.-J. Schmid, Advances in Mechanical Engineering 6 (2014) 1687–8140.

DOI

Liquid–liquid phase transfer of magnetite nanoparticles — Evaluation of surfactants

J. Erler, S. Machunsky, P. Grimm, H.-J. Schmid, U.A. Peuker, Powder Technology 247 (2013) 265–269.

DOI

Hocheffiziente Feinstaubabscheidung aus Kleinfeuerungsanlagen mit einem Schlauchfilter

S. Schiller, H.-J. Schmid, Chemie Ingenieur Technik (2013) 1324–1328.

DOI

In-situ Strukturcharakterisierung von CNT in polymerbasierten Nanokompositen Methodenentwicklung und Anwendung

S. Gerkens, In-situ Strukturcharakterisierung von CNT in polymerbasierten Nanokompositen Methodenentwicklung und Anwendung, Aachen, 2013.


Wood-Plastic-Composites: Rheologische Charakterisierung und Füllverhalten im Spritzgießprozess

N. Kirchhoff, C. Schröder, D. Stute, E. Moritzer, H.-J. Schmid, Chemie Ingenieur Technik (2012) 1584–1589.

DOI

Sintering kinetics and mechanism of vitreous nanoparticles

M.J. Kirchhof, H. Förster, H.-J. Schmid, W. Peukert, Journal of Aerosol Science 45 (2012) 26–39.

DOI

Porosity as a key to increase material properties of laser sintered parts

S. Rüsenberg, L. Schmidt, H. Hosse, H.-J. Schmid, Porosity as a Key to Increase Material Properties of Laser Sintered Parts, 2011.

DOI

Aerosol synthesis of silicon nanoparticles with narrow size distribution—Part 2: Theoretical analysis of the formation mechanism

R. Körmer, H.-J. Schmid, W. Peukert, Journal of Aerosol Science 41 (2010) 1008–1019.

DOI

Aerosol synthesis of silicon nanoparticles with narrow size distribution—Part 1: Experimental investigations

R. Körmer, M.P.M. Jank, H. Ryssel, H.-J. Schmid, W. Peukert, Journal of Aerosol Science 41 (2010) 998–1007.

DOI

Interparticle forces in silica nanoparticle agglomerates

M. Seipenbusch, S. Rothenbacher, M. Kirchhoff, H.-J. Schmid, G. Kasper, A.P. Weber, Journal of Nanoparticle Research 12 (2010) 2037–2044.

DOI

Interfacial energy estimation in a precipitation reaction using the flatness based control of the moment trajectories

V. Vassilev, M. Gröschel, H.-J. Schmid, W. Peukert, G. Leugering, Chemical Engineering Science 65 (2009) 2183–2189.

DOI

Simulation of structure and mobility of aggregates formed by simultaneous coagulation, sintering and surface growth

B. Al Zaitone, H.-J. Schmid, W. Peukert, Journal of Aerosol Science 40 (2009) 950–964.

DOI

Liquid–liquid phase transfer of magnetite nanoparticles

S. Machunsky, P. Grimm, H.-J. Schmid, U.A. Peuker, Colloids and Surfaces A: Physicochemical and Engineering Aspects 348 (2009) 186–190.

DOI

Three-dimensional simulation of viscous-flow agglomerate sintering

M.J. Kirchhof, H.-J. Schmid, W. Peukert, Physical Review E 80 (2009) 026319.

DOI

A comprehensive approach in modeling Lagrangian particle deposition in turbulent boundary layers

M. Horn, H.-J. Schmid, Powder Technology 186 (2008) 189–198.

DOI

Influence of particle size and concentration on the second-harmonic signal generated at colloidal surfaces

L. Schneider, H.-J. Schmid, W. Peukert, Applied Physics B 87 (2007) 333–339.

DOI

Neuer Ansatz zur Modellierung der Abscheidung in einem modifizierten Rohrelektrofilter

H.-J. Schmid, Gefahrstoffe, Reinhaltung der Luft. Air Quality Control 67 (2007).


Simulation of the hydrodynamic drag of aggregated particles

C. Binder, C. Feichtinger, H.-J. Schmid, N. Thürey, W. Peukert, U. Rüde, Journal of Colloid and Interface Science 301 (2006) 155–167.

DOI

Modellierung der wandnahen Bereiche in turbulenten Zweiphasenströmungen

M. Horn, H.-J. Schmid, Chemie Ingenieur Technik 78 (2006) 694–699.

DOI

Modelling titania formation at typical industrial process conditions: effect of surface shielding and surface energy on relevant growth mechanisms

C. Artelt, H.-J. Schmid, W. Peukert, Chemical Engineering Science 61 (2006) 18–32.

DOI

Predictive simulation of nanoparticle precipitation based on the population balance equation

H.-C. Schwarzer, F. Schwertfirm, M. Manhart, H.-J. Schmid, W. Peukert, Chemical Engineering Science 61 (2005) 167–181.

DOI

Evolution of the fractal dimension for simultaneous coagulation and sintering

H.-J. Schmid, B. Al-Zaitone, C. Artelt, W. Peukert, Chemical Engineering Science 61 (2005) 293–305.

DOI

On the impact of accessible surface and surface energy on particle formation and growth from the vapour phase

C. Artelt, H.-J. Schmid, W. Peukert, Journal of Aerosol Science 36 (2005) 147–172.

DOI

Monte Carlo simulation of aggregate morphology for simultaneous coagulation and sintering

H.-J. Schmid, S. Tejwani, C. Artelt, W. Peukert, Journal of Nanoparticle Research 6 (2004) 613–626.

DOI

Reactor system for the study of high-temperature short-time sintering of nanoparticles

M.J. Kirchhof, H.-J. Schmid, W. Peukert, Review of Scientific Instruments 75 (2004) 4833–4840.

DOI

Erhöhung der Abscheidung ultrafeiner Dieselrußpartikeln durch Mikrokugelbeschichtung auf metallträgerbasierten Katalysatorstrukturen

A. Messerer, H.-J. Schmid, C. Knab, U. Pöschl, R. Nießner, Chemie Ingenieur Technik 76 (2004) 1092–1096.

DOI

On the modelling of the particle dynamics in electro-hydrodynamic flow-fields: I. Comparison of Eulerian and Lagrangian modelling approach

H.-J. Schmid, L. Vogel, Powder Technology 135/136 (2003) 118–135.

DOI

On the modelling of the particle dynamics in electro-hydrodynamic flow fields: II. Influences of inhomogeneities on electrostatic precipitation

H.-J. Schmid, Powder Technology 135/136 (2003) 136–149.

DOI

Herausforderungen für die Lehre am Beispiel der mechanischen Verfahrenstechnik

W. Peukert, H.-J. Schmid, Chemie Ingenieur Technik 75 (2003) 177–183.

DOI

On the relevance of accounting for the evolution of the fractal dimension in aerosol process simulations

C. Artelt, H.-J. Schmid, W. Peukert, Journal of Aerosol Science 34 (2003) 511–534.

DOI

In-Situ Determination of the Charging of Nanometer and Submicron Particles at High Temperatures

A. Schiel, A.P. Weber, G. Kasper, H.-J. Schmid, Particle & Particle Systems Characterization 19 (2002) 410–418.

DOI

In-Situ Measurement of Local Particle Flux Densities in a Complex Two-Phase Flow

H.-J. Schmid, S. Veith, H. Umhauer, Particle & Particle Systems Characterization 19 (2002).

DOI

Trennprozesse: Abschnitt 7.5.3

H.-J. Schmid, in: Handbuch Der Mechanischen Verfahrenstechnik, 2002.

DOI

Novel Concepts for Teaching Particle Technology

H.-J. Schmid, W. Peukert, Chemical Engineering Education 36 (2002).


On the Modelling of the Electro-Hydrodynamic Flow Field in Electrostatic Precipitators

H.-J. Schmid, Flow, Turbulence and Combustion 68 (2002) 63–89.

DOI

Zum Partikeltransport in Elektrischen Abscheidern

H.-J. Schmid, Zum Partikeltransport in Elektrischen Abscheidern, Shaker Verlag, 1998.


Show all publications

Pub­lic­a­tions and con­fer­ence pro­ceed­ings

  • Christina Kummert, Stefan Josupeit, Hans-Joachim Schmid
    Thermoplastic Elastomer Part Color as Function of Tmeperature Histories and Oxygen Atmosphere During Selectice Laser Sintering
    JOM (The Journal of The Minerals, Metals  Material Society (TMS)) (2017)
     
  • Jens Laube, Michael Dörmann, Hans-Joachim Schmid, Lutz Mädler, Lucio Colombi Ciacchi
    Dependencies of the Adhesion Forces between TiO2 Nanoparticles on Size and Ambient Humidity
    J. Phys. Chem. C (2017), 121 (28), pp 15294–15303
     
  • Patrick Delfs, Hans-Joachim Schmid
    Areal Surface Characterization of Laser Sintered Parts for various Process Parameters
    Solid Freeform Fabrication Symposium (SFF), Austin, USA (2017)
     
  • Stefan Josupeit, Hans-Joachim Schmid
    Experimental analysis and modeling of local ageing effects during laser sintering of polyamide 12 in regard to individual thermal histories
    Journal of Applied Polymer Science (2017)
     
  • Tobias Lieneke, Guido Adam, Stefan Josupeit, Patrick Delfs, Detmar Zimmer
    Maßtoleranzen für die additive Fertigung: Experimentelle Untersuchung für das Lasersintern
    Rapid.Tech, Erfurt (2017)
     
  • Dennis Menge, Stefan Josupeit, Patrick Delfs, Hans-Joachim Schmid
    Herstellbarkeit und mechanische Charakterisierung von lasergesinterten Gitterstrukturen
    Springer Vieweg Fachbuch: Additive Fertigung von Bauteilen und Strukturen (2017), pp. 105-120
     
  • Michael Dörmann, Hans-Joachim Schmid
    Distance-dependency of capillary bridges in thermodynamic equilibrium
    Powder Technology 312 (2017), pp. 175-183
     
  • Steffen Jesinghausen, Hans-Joachim Schmid
    Direct measurement of wall slip and slip layer thickness of non-Brownian hard-sphere suspensions in rectangular channel flows
    Experiments in Fluids 57 (2016), Issue 9, 1-15
     
  • Sven Pieper, Hans-Joachim Schmid
    Guard ring induced distortion of the steady velocity profile in a parallel plate rheometer
    Applied Rheology 26 (2016), Issue 6, p. 64533
     
  • Stefan Josupeit, Patrick Delfs, Dennis Menge, Hans-Joachim Schmid
    Herstellbarkeit und mechanische Charakterisierung von lasergesinterten Gitterstrukturen
    DVM-Tagung "Additiv gefertigte Bauteile und Strukturen", Berlin, Deutschland, pp. 51-61 (2016)
     
  • Friedrich Prill, Sascha Schiller, Hans-Joachim Schmid
    Development of a Filtration System for the Combined Separation of Ultrafine Dust Particles and Gaseous Pollutants from Biomass Combustion Processes
    FILTECH (2016)
     
  • Stefan Josupeit, Hans-Joachim Schmid
    Temperature history within laser sintered part cakes and its influence on process quality
    Rapid Prototyping Journal 22 (2016) 5, pp. 788-793
     
  • Stefan Josupeit, Patrick Delfs, Dennis Menge, Hans-Joachim Schmid
    Manufacturability and Mechanical Characterization of Laser Sintered lattice Structures
    Solid Freeform Fabrication Symposium (SFF), Austin, USA (2016)
     
  • Stefan Josupeit, Lavish Ordia, Hans-Joachim Schmid
    Modelling of temperatures and heat flow within laser sintered part cakes
    Additive Manufacturing (2016)
     
  • Patrick Delfs, Marcel Töws, Hans-Joachim Schmid
    Optimized build orientation of additive manufactured parts for improved surface quality and build time
    Additive Manufacturing (2016)
     
  • Sven Pieper, Hans-Joachim Schmid
    Layer-formation of non-colloidal suspensions in a parallel plate rheometer under steady shear
    Journal of Non-Newtonian Fluid Mechanics 234 (2016), pp 1-7 
     
  • Stefan Josupeit, Patrick Delfs, Tobias Lieneke, Guido Adam, Hans-Joachim Schmid
    Dimensional accuracy of polymer laser sintered parts: Influences and measures
    Rapid.Tech, Erfurt, Deutschland (2016), pp. 107-120
     
  • Stefan Josupeit, Hans-Joachim Schmid
    Thermal properties of polyamide 12 powder for application in laser sintering
    International Congress on Particle Technology (PARTEC), Nürnberg, Deutschland (2016)
     
  • Michael Dörmann, Hans-Joachim Schmid
    Continuum-mechanical simulation of capillary bridges between nanoscale particles
    International Congress on Particle Technology (PARTEC), Nürnberg, Deutschland (2016)
     
  • Sascha Schiller, Hans-Joachim Schmid
    Modelling and Simulation of pressure drop at non-homogeneous filtration conditions
    World Filtration Congress, Taipeh, Taiwan (2016)
     
  • Patrick Delfs, Hans-Joachim Schmid
    Extended Analysis of the Surface Topography of Laser Sintered Polymer Parts
    Fraunhofer Direct Digital Manufacturing Conference, Berlin, Deutschland (2016)
     
  • Sascha Schiller, Hans-Joachim Schmid
    Evaluation of the efficiency of filtration processes using precoat materials
    Chemical Engineering & Technology 39 (2016) 3, pp 491–498
     
  • Sascha Schiller, Hans-Joachim Schmid
    Evaluation of the Efficiency of Filtration Processes Using Precoat Materials
    FILTECH (2015)
     
  • Lena Tigges, Alfred Wiedensohler, Kay Weinhold, Jay Gandhi, Hans-Joachim Schmid
    Bipolar charge distribution of a soft X-ray diffusion charger
    Journal of Aerosol Science, 90 (2015), pp 77-86
     
  • Stefan Josupeit, Sabine Tutzschky, Monika Gessler, Hans-Joachim Schmid
    Powder ageing and material properties of laser sintered polyamide 12 using low refresh rates
    Neue Entwicklungen in der Additiven Fertigung: Beiträge aus der wissenschaftlichen Tagung der Rapid.Tech 2015, (2015), pp 63-78
     
  • Lena Tigges, Ankit Jain, Hans-Joachim Schmid
    On the bipolar charge distribution used for mobility particle sizing: Theoretical considerations
    Journal of Aerosol Science, 88 (2015), pp 119-134
     
  • Tobias Lieneke, Guido Adam, Stefan Leuders, Frederick Knoop, Stefan Josupeit, Patrick Delfs, Nils Funke, Detmar Zimmer
    Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen für additive Fertigungsverfahren
    Rapid.Tech, Erfurt, Deutschland (2015)
     
  • Stefan Josupeit, Johannes Lohn, Eduard Hermann, Monika Gessler, Stephan Tenbrink, Hans-Joachim Schmid
    Material properties of laser sintered polyamide 12 as function of build cycles using low refresh rates
    Solid Freeform Fabrication Symposium (SFF), Austin, USA (2015)
     
  • Stefan Josupeit, Hans-Joachim Schmid
    Temperature history within laser sintered part cakes and its unfluence on process quality
    Solid Freeform Fabrication Symposium (SFF), Austin, USA (2015)
     
  • Tobias Lieneke, Guido Adam, Stefan Leuders, Frederick Knoop, Stefan Josupeit, Patrick Delfs, Nils Funke, Detmar Zimmer
    Systematical determination of tolerances for additive manufacturing by measuring linear dimensions
    Solid Freeform Fabrication Symposium (SFF), Austin, USA (2015)
     
  • Patrick Delfs, Zhiyuan Li, Hans-Joachim Schmid
    Mass Finishing of Laser Sintered Parts
    Solid Freeform Fabrication Symposium (SFF), Austin, USA (2015)
     
  • Patrick Delfs, Marcel Töws, Hans-Joachim Schmid
    Surface Roughness optimized Alignment of Parts for Additive Manufacturing Processes
    Solid Freeform Fabrication Symposium (SFF), Austin, USA (2015)
     
  • Sascha Schiller, Hans-Joachim Schmid
    Highly efficient filtration of ultrafine dust in baghouse filters using precoat materials
    Powder Technology 279 (2015), pp 96-105
     
  • Michael Dörmann, Hans-Joachim Schmid
    Simulation of Capillary Bridges between Particles
    Procedia Engineering 102 (2015), pp 14-23
     
  • Sven Pieper, Nadine Kirchhoff, Hans-Joachim Schmid
    Absence of pressure sensitivity of apparent wall slip in pressure-driven flow of non-colloidal suspensions
    Rheologica Acta 54 (1) (2015), pp 69-75
     
  • Michael Dörmann, Hans-Joachim Schmid
    Simulation of Capillary Bridges between Nanoscale Particles
    Langmuir, 30 (2014) 4, pp 1055–1062
     
  • Stefan Josupeit, Stefan Rüsenberg, Nicola Rupp, Monika Gessler, Hans-Joachim Schmid
    Thermal Ageing of Polyamide 12 used for Polymer Laser Sintering - Influence on Part Quality Characteristics
    Annual Technical Conference of the American Spciety of Plastics Engineers (ANTEC) (2014), pp 2383-2388
     
  • Sascha Schiller, Hans-Joachim Schmid
    Ultrafine Dust Filtration Using Precoat Materials Considering the Influence of Filter Media
    Chemical Engineering & Technology, 37 (2014) 6, pp 1009-1020
     
  • Stefan Rüsenberg, Stefan Josupeit, Hans-Joachim Schmid
    A Method to Characterize the Quality of a Polymer Laser Sintering Process
    Advances in Mechanical Engineering, Volume 2014, Article ID 185374
     
  • Stefan Josupeit, Hans-Joachim Schmid
    Three-Dimensional In-Process Temperature measurement of Laser Sintered Part Cakes
    Solid Freeform Fabrication Symposium (SFF) (2014)
     
  • Stefan Josupeit, Lavish Ordia, Hans-Joachim Schmid
    Development of a Basic Model to Simulate the Laser Sintering Cooling Process
    International Conference on Additive Technologies (ICAT) (2014)
     
  • Patrick Delfs, Ashrith Ananthraj Herale, Zhiyuan Li, Hans-Joachim Schmid
    Simulation of the Surface Topography on Laser Sintered Polymer Parts
    Solid Freeform Fabrication Symposium (SFF) (2014)
     
  • Sascha Schiller, Hans-Joachim Schmid
    Hocheffiziente Feinstaubabscheidung aus Kleinfeuerungsanlagen mit einem Schlauchfilter
    Chemie Ingenieur Technik (CIT), 85 (2013) 8, pp 1324-1328 
     
  • Sascha Schiller, Hans-Joachim Schmid
    Multiple-Use of Precoat Materials for the Fine Dust Filtration of a Baghouse Filter for Wood-Fired Heaters
    Filtech (2013)
     
  • Stefan Josupeit, Stefan Rüsenberg, Hans-Joachim Schmid
    A Material Based Quality Concept for Polymer Laser Sintering
    Solid Freeform Fabrication Symposium (SFF) (2013), pp 44-54
     
  • Stefan Rüsenberg, Agnes Bagsik, Johannes Büsching, Hans-Joachim Schmid
    Additiv versus Konventionell: Benchmarking am Beispiel eines Designs aus der Luftfahrtindustrie
    Rapid.Tech (2013)
     
  • Stefan Rüsenberg, Hans-Joachim Schmid
    Advanced Characterization Method of nylon 12 Materials for Application in Laser Sinter Processing
    International Conference of the Polymer Processing Society (PPS), 1593, 713 (2014)
     
  • Sven Pieper, Hans-Joachim Schmid
    Apparent Wall Slip and Particle Migration in Laminar Flow of Suspensions through a Slit Die
    International Congress on Particle Technology (PARTEC) (2013)
     
  • Jacqueline Erler, Stefanie Machunsky, Philipp Grimm, Hans-Joachim Schmid, Urs Peuker
    Liquid-Liquid Phase Transfer of Magnetite Nanoparticles - Evaluation of Surfactants
    Powder Technology, 247 (2013), pp 265-269
     
  • Philipp Grimm, Hans-Joachim Schmid
    An efficient process for producing high-quality organosols
    International Congress on Particle Technology (PARTEC) (2013)
     
  • Agnes Bagsik, Stefan Josupeit, Volker Schöppner, Eric Klemp
    Mechanical analysis of lightweight constructions manufactured with fused deposition modeling
    International Conference of the Polymer Processing Society (PPS), 1593, 696 (2014)
     
  • Sascha Schiller, Hans-Joachim Schmid
    Development of a baghouse filter for domestic wood-fired heaters
    World Filtration Congress (2012)
     
  • Sascha Schiller, Hans-Joachim Schmid
    Höchst effiziente Feinstaubabscheidung aus Kleinfeuerungsanlagen und dauerhafte Einhaltung von extrem niedrigen Emissionswerten mit einem Schlauchfilter
    VDI-Berichte 2165: "Emissionsminderung 2012" (2012)
     
  • Stefan Rüsenberg, Rene Weiffen, Frederick Knoop, Hans-Joachim Schmid
    Controlling the Quality of Laser Sintered Parts along the Process Chain
    Solid Freeform Fabrication Symposium (SFF) (2012)
     
  • Stefan Rüsenberg, Lukas Schmidt, Hendrik Hosse, Hans-Joachim Schmid
    Mechanical Properties as a result of multitude of parameters
    European Forum on Rapid Prototyping (2012)
     
  • Nadine Kirchhoff, Cathrin Schröder, Daniel Stute, Elmar Moritzer, Hans-Joachim Schmid
    Wood-Plastic-Composites: Rheologische Charakterisierung und Füllverhalten im Spritzgießprozess
    Chemie Ingenieur Technik (CIT), 84 (2012) 9, pp 1584-1589
     
  • Martin J. Kirchhof, Henning Förster, Hans-Joachim Schmid, Wolfgang Peukert
    Sintering Kinetics and Mechanisms of Vitreous Nanoparticles
    Journal of Aerosol Science, 45 (2012), pp 26-39
     
  • Hans-Joachim Schmid, Stefan Rüsenberg, Zhenpeng Sun
    Powder Aging upon Laser Sintering – Characterization and Consequences
    Solid Freeform Fabrication Symposium (SFF) (2011)
     
  • Jianquan Bo, Josef Noeke
    Sprachliche Vorbereitung von chinesischen Studierenden auf ein Maschinenbaustudium und auf ein Fachpraktikum in Deutschland
    CDAH-Tagung (Chinesisch-Deutsches Forum für Anwendungsorientierte Hochschulausbildung) (2011)
     
  • Josef Noeke
    Aufbau und Betrieb der Chinesisch-Deutschen Technischen Fakultät Qingdao
    Tagungsband des zweiten Chinesisch-Deutschen Forums in Hannover (2011)
     
  • Martin J. Kirchhof, Henning Förster, Hans-Joachim Schmid, Wolfgang Peukert
    Sintering Kinetics and Mechanisms of Vitreous Nanoparticles
    Journal of Aerosol Science, 45 (2012), pp 26-39
     
  • Stefan Rüsenberg, Lukas Schmidt, Hendrik Hosse, Hans-Joachim Schmid
    Porosity as a Key to Increase Material Properties of Laser Sintered Parts
    Innovative Developments in Virtual and Physical Prototyping (VRAP), Bartolo et al. (Hrsg.), CRC Press, (2011) 81
     
  • Stefan Rüsenberg, Lukas Schmidt, Hans-Joachim Schmid
    Mechanical and Physical Properties – A Way to assess quality of Laser Sintered Parts
    Solid Freeform Fabrication Symposium (SFF) (2011)
     
  • Lena Knobel, Hans-Joachim Schmid
    Bipolar Stationary Charge Distribution - A Closer Look to Relevant und Irrelevant Influences
    European Aerosol Conference (EAC) (2011)
     
  • Hans-Joachim Schmid, Martin J. Kirchhof
    Sintering of Silica Nanoparticles
    International Aerosol Conference (IAC) (2010)
     
  • Stefan Gerkens, Frank Bayer, Klaus Huber, Hans-Joachim Schmid
    Structure Analysis of Nanocomposites using QELS
    World Congress on Particle Technology (WCPT) (2010)
     
  • M. Seipenbusch, S. Rothenbacher, Martin J. Kirchhof, Hans-Joachim Schmid, A. P. Weber
    Interparticle forces in silica nanoparticle agglomerates
    Journal of Nanoparticle Research, 12 (2010) 6, pp 2037-2044
     
  • Richard Körmer, M.P.M. Jank, H. Ryssel, Hans-Joachim Schmid, Wolfgang Peukert
    Aerosol synthesis of silicon nanoparticles with narrow size distribution-Part 1: Experimental investigations
    Journal of Aerosol Science, 41 (2010) 11, pp 998-1007
     
  • Richard Körmer, Hans-Joachim Schmid, Wolfgang Peukert
    Aerosol synthesis of silicon nanoparticles with narrow size distribution-Part 2: Theoretical analysis of the formation mechanism
    Journal of Aerosol Science, 41 (2010) 11, pp 1008-1019
     
  • Martin J. Kirchhof, Hans-Joachim Schmid, Wolfgang Peukert
    Three-dimensional simulation of viscous flow agglomerate sintering
    Physical Review E, 80 (2009) 2, 026319
     
  • Stefanie Machunsky, Philipp Grimm, Hans-Joachim Schmid, Urs Peuker
    Liquid-liquid phase transfer of magnetite nanoparticles
    Colloids and Surfaces A, 348 (2009) 1-3, pp 186-190
     
  • Belal Al-Zaitone, Hans-Joachim Schmid, Wolfgang Peukert
    Simulation of structure and mobility of aggregates formed by simultaneous coagulation, sintering and surface growth
    Journal of Aerosol Science, 40 (2009) 11, pp 950-964
     
  • Vassil Vassilev, Michael Gröschel, Hans-Joachim Schmid, Wolfgang Peukert, G. Leugering
    Interfacial energy estimation in a precipitation reaction using the flatness based control of the moment trajectories
    Chemical Engineering Science, 65 (2009) 6, pp  2183-2189
     
  • Stefanie Machunsky, Philipp Grimm, Hans-Joachim Schmid, Urs Peuker
    Liquid-liquid phase transfer of magnetite nanoparticles
    World Congress on Chemical Engineering (2009)
     
  • Henning Förster, D. Kilian, Hans-Joachim Schmid, Wolfgang Peukert
    Novel Arc Plasma System for the Aerosol Synthesis of Metal Nanoparticles
    European Aerosol Conference (EAC) (2009)
     
  • Jacqueline Erler, Stefanie Machunsky, Philipp Grimm, Hans-Joachim Schmid, Urs Peuker
    Flüssig/Flüssig-Phasentransfer von Nanopartikeln
    Chemie Ingenieur Technik (CIT), 80 (2008) 9, pp 1424-1425
     
  • Michael Horn, Hans-Joachim Schmid
    A comprehensive approach in modeling Lagrangian particle deposition in turbulent boundary layers
    Powder Technology, 169 (2008), pp 189-198
     
  • Richard Körmer, Hans-Joachim Schmid, Michael P.M. Jank, H. Ryssel, Wolfgang Peukert
    Aerosol synthesis of monodisperse, high-purity silicon nanoparticles
    European Aerosol Conference (EAC) (2008)
     
  • Stefanie Machunsky, Philipp Grimm, Hans-Joachim Schmid, Urs Peuker
    Flüssig-flüssig-Phasentransfer von Magnetit Nanopartikeln
    Processnet Jahrestagung / Chemie Ingenieur Technik, 80 (2008), pp 1424-1425
     
  • L. Schneider, Hans-Joachim Schmid, Wolfgang Peukert
    Influence of particle size and concentration on the second harmonic signal generated at colloidal surfaces
    Applied Physics B, 87 (2007) 2, pp 333-339
     
  • Michael Horn, Hans-Joachim Schmid
    Neuer Ansatz zur Modellierung der Abscheidung in einem modifizierten Rohrelektrofilter
    Gefahrstoffe - Reinhaltung Luft, 67 (2007) 4, pp 147-151
     
  • Michael Horn, Hans-Joachim Schmid
    Soot separation in a modified pipe electrostatic precipitator
    Filtech (2007)
     
  • Hans-Joachim Schmid
    Modelling of Structure-Property Relationships of Nanoscaled Powders
    International Congress on Particle Technology (PARTEC) (2007)
     
  • Michael Horn, Hans-Joachim Schmid
    Influence of Convergence Control on Lagrangian Predictions of Particulate Two-Phase Flow
    International Congress on Particle Technology (PARTEC) (2007)
     
  • Michael Horn, Hans-Joachim Schmid
    Soot Separation in a Modified Pipe Electrostatic Precipitator
    International Congress on Particle Technology (PARTEC) (2007)
     
  • Martin J. Kirchhof, Henning Förster, Hans-Joachim Schmid, Wolfgang Peukert
    Investigation o f the Sintering Kinetics of Airborne Nanoparticles in a High-Temperature Reactor System
    International Congress on Particle Technology (PARTEC) (2007)
     
  • Richard Körmer, Hans-Joachim Schmid, Michael P.M. Jank, T. Erlbacher, H. Ryssel, Wolfgang Peukert
    Synthesis of Functional Nanoparticles
    International Congress on Particle Technology (PARTEC) (2007)
     
  • Vassil Vassilev, M. Gröschel, Wolfgang Peukert, G. Leugering, Hans-Joachim Schmid
    Interfacial energy estimation in a precipitation reaction using the flatness based control of the moment trajectories
    International Conference on Population Balance Modelling (2007)
     
  • Christian Artelt, Hans-Joachim Schmid, Wolfgang Peukert
    Modelling titania formation at typical industrial process conditions: effect of structure and material properties on relevant growth mechanisms
    Chemical Engineering Science, 61 (2006) 1, pp 18-32
     
  • Hans-Joachim Schmid, Belal Al-Zaitone, Christian Artelt, Wolfgang Peukert
    Evolution of the Fractal Dimension for Simultaneous Coagulation and Sintering
    Chemical Engineering Science, 61 (2006) 1, pp 293-305
     
  • H.-C. Schwarzer, F. Schwertfirm, M. Manhart, Hans-Joachim Schmid, Wolfgang Peukert
    Predictive simulation of nanoparticle precipitation based on the population balance equation
    Chemical Engineering Science, 61 (2006) 1, pp 167-181
     
  • Michael Horn, Hans-Joachim Schmid
    Modellierung der wandnahen Bereiche in turbulenten Zweiphasenströmungen
    Chemie Ingenieur Technik (CIT), 78 (2006) 6, pp 694-699
     
  • C. Binder, C. Feichtinger, Hans-Joachim Schmid, N. Thürey, Wolfgang Peukert, U. Rüde
    Simulation of the Hydrodynamic Drag on Aggregated Particles
    Journal of Colloid and Interface Science, 301 (2006) 1, pp 155-167
     
  • Hans-Joachim Schmid
    Simulation of Aerosol Synthesis by Simultaneous Coagulation, Sintering and Growth: Structure and Product Property Formation
    World Congress on Particle Technology (WCPT) (2006)
     
  • Hans-Joachim Schmid, Martin J. Kirchhof, Henning Förster, Wolfgang Peukert
    Theoretical and Experimental Investigations on Sintering Kinetics of Silica Nanoparticles
    World Congress on Particle Technology (WCPT) (2006)
     
  • Hans-Joachim Schmid, Christian Binder, Nils Thürey, Wolfgang Peukert
    Simulation of the Hydrodynamic Behaviour of Aggregated Particles
    World Congress on Particle Technology (WCPT) (2006)
     
  • Michael Horn, Hans-Joachim Schmid
    Convergence Control and Convergence Improvement in Lagrangian Predictions of Particulate Two-Phase Flows
    World Congress on Particle Technology (WCPT) (2006)
     
  • Michael Horn, Hans-Joachim Schmid
    Modelling of the Boundary Layer in Turbulent Two-Phase-Flows
    World Congress on Particle Technology (WCPT) (2006)
     
  • J. Gradl, F. Schwertfirm, H.-C. Schwarzer, Hans-Joachim Schmid, M. Manhart, Wolfgang Peukert
    Nanoparticle Precipitation in a T-Mixer: Coupling Experimental and Numerical Investigations of the Fluid Dynamics with the Solid Formation Processes
    ASME Fluids Engineering Summer Meeting (2006)
     
  • Martin J. Kirchhof, Hans-Joachim Schmid, Henning Förster, Wolfgang Peukert
    Sintering Kinetics of Silica Nanoparticles: Comparison of Theory and Experiment
    International Aerosol Conference (IAC) (2006)
     
  • Hans-Joachim Schmid
    Aerosol Synthesis by Simultaneous Nucleation, Coagulation, Sintering and Growth: Simulation of Structure and Product Property Formation
    International Aerosol Conference (IAC) (2006)
     
  • Hans-Joachim Schmid
    Struktur-Eigenschafts-Beziehungen nanoskaliger Pulver
    GVC-Jahrestagung (2006)
     
  • Christian Artelt, Hans-Joachim Schmid, Wolfgang Peukert
    On the impact of accessible surface and surface energy on particle formation and growth from the vapour phase
    Journal of Aerosol Science, 36 (2005) 2, pp 147-172
     
  • Hans-Joachim Schmid, Belal Al-Zaitone, Wolfgang Peukert
    Strukturbildung bei der Aerosolsynthese unter Berücksichtigung von simultaner Agglomeration, Sinterung und Oberflächenwachstum
    NanoMat Szene (2005)
     
  • Martin J. Kirchhof, Henning Förster, Hans-Joachim Schmid, Wolfgang Peukert
    Sintering Kinetics of Silica Nanoparticles: Theory and Experiment
    European Aerosol Conference (EAC) (2005)
     
  • Hans-Joachim Schmid, Belal Al-Zaitone, Wolfgang Peukert
    Simulation of Structure Formation in Aerosol Synthesis by Simultaneous Coagulation, Sintering and Growth
    European Aerosol Conference (EAC) (2005)
     
  • Martin J. Kirchhof, S. Froeschke, Hans-Joachim Schmid, A. P. Weber
    Characterization of First-Stage Sintering Kinetics
    European Aerosol Conference (EAC) (2005)
     
  • Martin J. Kirchhof, R. Diaz, Henning Förster, Hans-Joachim Schmid, Wolfgang Peukert
    Sintering Kinetics of Silica Nanoparticles: Theory and Experiment
    International Conference on Sintering (2005)
     
  • Messerer, Hans-Joachim Schmid, C. Knab, U. Pöschl, R. Nießner
    Erhöhung der Abscheidung ultrafeiner Dieselrußpartikeln durch Mikrokugelbeschichtung auf metallträgerbasierten Katalysatorstrukturen
    Chemie Ingenieur Technik (CIT), 76 (2004) 8, pp 1092-1096
     
  • Martin J. Kirchhof, Hans-Joachim Schmid, Wolfgang Peukert
    A New Reactor System for the Study of High Temperature Short-Time Sintering Kinetics of Nanoparticles
    Review of Scientific Instruments, 75 (2004) 11, pp 4833-4840
     
  • Hans-Joachim Schmid, Saurabh Tejwani, Christian Artelt, Wolfgang Peukert
    Monte Carlo simulation of aggregate morphology for simultaneous coagulation and sintering
    Journal of Nanoparticle Research, 6 (2004) 6, pp 613-626
     
  • Martin J. Kirchhof, Hans-Joachim Schmid, Wolfgang Peukert
    Experimental Study of the Sintering Progress of Ceramic Nanoparticles in a High Temperature Reactor System
    International Congress on Particle Technology (PARTEC) (2004)
     
  • Hans-Joachim Schmid, S. Teijwani, Christian Artelt, Wolfgang Peukert
    Aggregate Structure Evolution Accounting for Simultaneous Agglomeration and Sintering
    International Congress on Particle Technology (PARTEC) (2004)
     
  • Michael Horn, Hans-Joachim Schmid
    New method in numerical modelling of electric wet painting
    International Congress on Particle Technology (PARTEC) (2004)
     
  • Christian Artelt, Hans-Joachim Schmid, Wolfgang Peukert
    On the relevance of aggregate structure in population balance modelling of aerosol generation and growth processes
    International Congress on Particle Technology (PARTEC) (2004)
     
  • Christian Artelt, Hans-Joachim Schmid, Wolfgang Peukert
    Modelling titania formation at typical industrial process conditions: effect of structure and material properties on relevant growth mechanisms
    International Conference on Population Balance Modelling (2004)
     
  • Hans-Joachim Schmid, S. Tejwani, Christian Artelt, Wolfgang Peukert
    Evolution of the Fractal Dimension During Aerosol Processes
    International Conference on Population Balance Modelling (2004)
     
  • Martin J. Kirchhof, Hans-Joachim Schmid, Wolfgang Peukert
    Sintering Kinetics of Ceramic Nanoparticle Doublets
    European Aerosol Conference (EAC) (2004)
     
  • Martin J. Kirchhof, A. Rozas, Hans-Joachim Schmid, Wolfgang Peukert
    Simulation of Viscous Flow Aerosol Sintering by Three-Dimensional Computational Fluid Dynamics
    European Aerosol Conference (EAC) (2004)
     
  • Martin J. Kirchhof, S. Froeschke, Hans-Joachim Schmid, A. P. Weber
    Determination of First-Stage Nanoparticle Sintering Contacts by Impact Fragmentation
    European Aerosol Conference (EAC) (2004)
     
  • Hans-Joachim Schmid, Martin Kirchhof, Wolfgang Peukert, Heike Mühlenweg, Georg Skillas, Catrin Becker
    Simulation der Partikelsynthese in Aerosolprozessen
    Tandem-Vortrag GVC-Jahrestagung (2004)
     
  • Hans-Joachim Schmid, Wolfgang Peukert
    Aggregate Structure Formation During Aerosol Synthesis
    AIChE Annual Meeting (2004)
     
  • Christian Artelt, Hans-Joachim Schmid, A. Saxena, Wolfgang Peukert
    Particle charging and coagulation during aerosol formation by nucleation
    AIChE Annual Meeting (2004)
     
  • Martin J. Kirchhof, Hans-Joachim Schmid, S. Froeschke, A.P. Weber
    Investigation of early stages of airborne nanoparticle sintering by impact fragmentation
    AIChE Annual Meeting (2004)
     
  • Martin J. Kirchhof, Hans-Joachim Schmid, Wolfgang Peukert
    Experimental Study of the Sintering Kinetics of Airborne Nanoparticles
    AIChE Annual Meeting (2004)
     
  • Martin J. Kirchhof, Hans-Joachim Schmid, Wolfgang Peukert
    Simulation of Viscous Flow Nanoparticle Sintering
    AIChE Annual Meeting (2004)
     
  • Christian Artelt, Hans-Joachim Schmid, Wolfgang Peukert
    On the Relevance of Accounting for the Evolution of the Fractal Dimension in Aerosol Process Simulations
    Journal of Aerosol Science, 34 (2003) 5, pp 511-534
     
  • Wolfgang Peukert, Hans-Joachim Schmid
    Herausforderungen für die Lehre am Beispiel der Mechanischen Verfahrenstechnik
    Chemie Ingenieur Technik (CIT), 75 (2003) 3, pp 177-183
     
  • Hans-Joachim Schmid, L. Vogel
    On the Modelling of the Particle Dynamics in Electro-Hydrodynamic Flow-Fields I: Com-parison of Eulerian and Lagrangian Modelling Approaches
    Powder Technology, 135/136 (2003), pp 118-135
     
  • Hans-Joachim Schmid
    On the Modelling of the Particle Dynamics in Electro-Hydrodynamic Flow-Fields II: Influences of Inhomogeneities on Electrostatic Precipitation
    Powder Technology, 135/136 (2003), pp 136-149
     
  • Christian Artelt, Hans-Joachim Schmid, Wolfgang Peukert
    Modelling Aerosol Processes with Evolving Fractal Behaviour
    European Aerosol Conference (EAC) / Journal of Aerosol Science, 34 (2003), pp 53-54
     
  • Christian Artelt, Hans-Joachim Schmid, Wolfgang Peukert
    Structural Effects on Modelling Relevant Nucleation and Growth Processes During Aerosol Generation
    European Aerosol Conference (EAC) / Journal of Aerosol Science, 34 (2003), pp 877-878
     
  • Martin J. Kirchhof, Hans-Joachim Schmid, Wolfgang Peukert
    Experimental Study of First-Stage Short-Time Sintering Kinetics of Airborne Silica Nanoparticles
    European Aerosol Conference (EAC) / Journal of Aerosol Science, 34 (2003), pp 107-108
     
  • Hans-Joachim Schmid, Christian Artelt, H. Mühlenweg, Wolfgang Peukert
    Comparison of Numerical Methods to Model Aerosol Dynamics
    European Aerosol Conference (EAC) / Journal of Aerosol Science, 34 (2003), pp 55-56
     
  • Martin J. Kirchhof, Hans-Joachim Schmid, Wolfgang Peukert
    Study of Short-Time Sintering Kinetics of Nanoscaled Aerosols at High Temperatures
    Particulate Systems Analysis Conference (PSA) (2003)
     
  • Hans-Joachim Schmid, S. Stolz, Hans Buggisch
    On the Modelling of the Electrohydrodynamic Flow Field in Electrostatic Precipitators
    Flow, Turbulence and Combustion, 68 (2002) 1, pp 63-89
     
  • Hans-Joachim Schmid, Susanne Veith, Heinz Umhauer
    In-Situ Measurement of Local Particle Flux Densities in a Complex Two-Phase Flow
    Particle & Particle Systems Characterization, 19 (2002) 3, pp 203-215
     
  • Hans-Joachim Schmid, Heinz Umhauer
    Electrostatic Precipitator Efficiency in the Fine Particle Regime
    Filtration, 2 (2002) 5, pp 135-141
     
  • Wolfgang Peukert, Hans-Joachim Schmid
    Novel Concepts for Teaching Particle Technology
    Chemical Engineering Education, 36 (2002) 4, pp 272-276
     
  • Annette Schiel, Alfred P. Weber, Gerhard Kasper, Hans-Joachim Schmid
    In-Situ Determination of the Charging of Nanometer and Submicron Particles at High Temperatures
    Particle & Particle Systems Characterization, 19 (2002) 6, pp 410-418
     
  • Hans-Joachim Schmid
    On the Modelling of Particle Transport in Electro-Hydrodynamic Flow-Fields
    European Congress of Chemical Engineering (2001)
     
  • Martin J. Kirchhof, Hans-Joachim Schmid, Wolfgang Peukert
    A New High-Temperature Reactor System for the Study of Short-Time Sintering Kinetics of Airborne Nanoparticles
    European Aerosol Conference (EAC) / Journal of Aerosol Science, 32 (2001), pp 225-226
     
  • Hans-Joachim Schmid, Martin J. Kirchhof, Wolfgang Peukert
    Study of High-Temperature, Short-Time Kinetic Processes in Airborne Nanoparticulate Systems
    International Workshop ’The Challenge of Nano-Particles’ (2001)
     
  • Hans-Joachim Schmid, Heinz Umhauer, Hans Buggisch
    Investigations on Electro-Hydrodynamic Flow-Fields in Electrostatic Precipitators and its Effect on Particle Transport
    Workshop on Two-phase Flow Predictions (1999)
     
  • Hans-Joachim Schmid, S. Stolz, Hans Buggisch
    On the Electro-Hydrodynamic Flow-Field in Electrostatic Precipitators
    International Symposium on Turbulence and Shear Flow Phenomena (1999)
     
  • Hans-Joachim Schmid, Heinz Umhauer, Hans Buggisch
    Investigations on Local Particle Fluxes in a Laboratory Scaled Electrostatic Precipitator
    Symposium Separation of Particles from Gases / PARTEC (1998)
     
  • Hans-Joachim Schmid, Hans Buggisch
    On the Modelling of Particle Transport in Electrostatic Precipitators
    International Conference on Electrostatic Precipitation (1998)
     
  • Hans-Joachim Schmid, Heinz Umhauer
    In-Situ Measurement of Local Particle Fluxes in a Laboratory-Scaled ESP
    International Conference on Electrostatic Precipitation (1998)
     
  • Hans-Joachim Schmid, A.M. Meroth, Heinz Umhauer, Hans Buggisch
    Modelling of Particle Transport in the Electro-Hydrodynamic Flow-Field of Electrostatic Precipitators
    American Association for Aerosol Research (AAAR) Annual Conference (1997)
     
  • J. Miller, Hans-Joachim Schmid, E. Schmidt, A.J. Schwab
    Local Deposition of Particles in a Laboratory-Scale Electrostatic Precipitator with barbed discharge Electrodes
    International Conference on Electrostatic Precipitation (1996)
     
  • Hans-Joachim Schmid, Heinz Umhauer
    Investigations on Particle Dynamics in a Plate-Type Electrostatic Precipitator Using Double-Pulse Holography
    International Conference on Electrostatic Precipitation (1996)
     
  • Hans-Joachim Schmid, E. Schmidt
    Investigations on Local Mass Flux of Dust to be Precipitated at the Collecting Electrode
    International Conference on Electrostatic Precipitation (1996)
     
  • Hans-Joachim Schmid, Heinz Umhauer
    The Holographic Determination of the Particle Dynamics in an Electro-Hydrodynamic Flow-Field
    International Symposium on Applications of Laser Techniques to Fluid Mechanis (1996)
     
  • Hans-Joachim Schmid, Heinz Umhauer
    Impulsholographische Untersuchung des Bewegungszustandes von Partikelkollektiven in einem Elektrischen Abscheider
    Lasermethoden in der Strömungsmeßtechnik 5. Fachtagung, B. Lehmann (Hrsg.), Shaker (1996)
     
  • Gutsch, Hans-Joachim Schmid, Hans Buggisch, Heinz Umhauer
    Investigations on Extent and Kinetics of Discharging Aerosol Particles
    Symposium Separation of Particles from Gases / PARTEC (1995)
Further information: